Motorized and Automatic Universal Hardness Tester, complies with ISO 6506, ISO 6507, ISO 6508, ISO 2039-2 and ASTM E10-23, ASTM E103-24, ASTM E384-22, ASTM E92, ASTM E18, ASTM E110 standards. This advanced testing instrument employs a high-precision load cell and Closed-Loop electronic control with

The Munro Stanley Portable Skid Resistance Tester (also known as the Pendulum Tester) is an essential tool for anyone with a duty to minimise the risk of accidents arising as a result of slippery roads and floor surfaces. This device is also used to investigate the cause of accidents after they have

The PAMAS OLS50P online particle counter is a stationary instrument for fluid condition monitoring. All types of light extinction sensors of the PAMAS HCB-LD series can be integrated in the PAMAS OLS50P. If required, the sensor can be built of resistant material, so that it can be used for the analy

SGR4 pyrgeometer is an instrument for the highest quality scientific measurements. The specially designed meniscus dome provides a 180° field of view with negligible directional response error. A hard-carbon coating on the outside of the dome smoothes the spectral response and provides extra protect

The PAMAS 4132 is used as a particle counting system for Single & Multipass Filter test rigs. The standard system fits in the test rigs of filter manufacturers. In case of a Single Pass Filter Test, the liquid passes the filter only once and then is deviated to the outflow. For ß-ratio-analyses, th

The compact Cflow extrusion plastometers were designed as stand-alone instruments for quick verification of melt mass-flow rates (MFR). They are primarily used for incoming goods inspection at plastics processors where melt flow tests are carried out sporadically and no PC connection is required. T

Raajratna is now introducing wide range of high quality wires, bars & profiles for medical sectors. We are supplying material for implants, needles and instruments. We can provide optimum quality wire in 302, 303, 304, 304V, 316, 316L, 316LVM, 316LRM, 420, 17-4PH, 420B grades and tempers. We delive

Overcoming the challenges of melt index testing with the Aflow The Aflow is characterized by its high level of automation. Whether simple cleaning and defined pre-compaction at the press of a button, or steplessly adjustable test loads, the Aflow extrusion plastometer adapts to your testing needs:

The Kipp & Zonen RaZON+ is an all-in-one system that accurately measures both direct normal irradiance (DNI) and diffuse horizontal irradiance (DHI) from the sun and sky, enabling it to provide very reliable values of global horizontal solar irradiance (GHI) and sunshine duration. The integrated dat

The Quadrofit Total Knee System is designed and developed for use in cemented and cementless application of Total Knee arthroplasty. The unique femoral cutting guide combines various functionalities in one component. This enables the surgeon to shape the femur fast and accurate with only one guide p

The SMP3 is a smart pyranometer with low maintenance and industry standard digital and analogue amplified outputs. Based on the proven CMP3 technology the SMP3 adds Modbus® interface, improved response time and temperature corrected measurement data. The wide and low power supply range from 5 to 30

The SMP6 is a Spectrally Flat Class B pyranometer that combines the sensor technology and housing from the CMP6. The SMP6 has both digital and analogue outputs and is low maintenance, extremely robust and reliable. It also comes with 5 years warranty. The SMP6 has an internal desiccant that will l

The RX-8000 is an ideal multigas monitor for marine applications. The RX-8000 sets the new industry standard for rugged, reliable portable gas detection. It’s tough, water proof design utilized features based on years of gas detection design experience, to assure that the instrument will operate pr

The ECOFIT® total hip system includes a complete variety of cementless and cemented hip stems for primary arthroplasty. Both standard offset stems and lateralised offset stems are available in cementless fixation or cemented options. The choice of the implant material for any given mode of fixation

Ultrasonic Treatment Solution The US 100 XL series of independent and automatic ultrasonic cleaning systems for the treatment of reusable medical devices and rigid endoscopes. Ideally suited to busy departments’ needs, the instrument can be easily installed in pre-treatment areas. Baskets can be loa

Since 1966, Tanaka has been delivering automated flash point testers for higher productivity at petroleum laboratories. The theme of the 8th generation model series is “ Ergonomic, Versatile, Robust and Safe “ ●Ergonomic: Color coordinated display and switches for high visibility / intuitive operat

ATI MARS is Motorized and Automatic Rockwell and Superficial Rockwell Hardness Tester, engineered to meet the rigorous standards set forth by ASTM E18, ISO 6508, and ISO 2039-2. This advanced testing instrument employs a high-precision load cell and Closed-Loop electronic control with a 1 KHz sampli

Leading Sealless Pump Performance for the Chemical Industry The CSA / CSI is HMD Kontro’s newest range of chemical service sealless pumps with full compliance to ASME B73.3 and ISO 2858 / 15783 standards. Incorporating latest magnetic drive technology, the range features a simple, modular design wit

The series GIPS-FC security shut-off valves are installed in pressure regulating or metering skid units in order to protect the pipe lines or the gas equipments and all downstream instruments from an unexpected over pressure or also in case of gas source interruption or even in case of rupture of it

ASTM D1621, ISO 844 Determining compressive properties of rigid cellular materials, in particular of expanded plastics Rigid foams are typically used in the construction industry as sound and thermal insulation. Calculations referenced in this standard include yield points, compressive strength, and

The vessels in the Auguste Cryogenics SCS-LNG product line are specifically designed to safely store liquified natural gas (LNG) at the extremely low temperature of -162 °C (-260 F). Minimal temperature fluctuations and product loss are ensured by high-quality vacuum/perlite or vacuum/multi-layer in

The T 2000 test set conforms to the following standards: - Electromagnetic Compatibility: Directive no. 2004/108/EC. Applicable Standard: EN 61326-1 + A1 + A2. - Low Voltage Directive: Directive n. 2006/95/EC. Applicable standard for a class I instrument, pollution degree 2, installation category

Specfications Instrument type Float Type Level Alarm with guiding tube. Explosion safety Type: II 1/2G Ex ia IIC T4 -40≤Ta≤ 60°C Standards: EN 60079-0:2009, EN 60079-11:2007, EN 60079-26:2007, EN 13462-1:2009 Products Type of products: Liquids, including liquefied gasses Viscosity: ≤ 100 mPa.s Sol

The pyranometer is compliant in its standard configuration with Class A requirements of the new IEC 61724-1 standard. SR30 is “Secondary Standard” in the ISO 9060:1990 standard and “Spectrally Flat Class A” in the ISO 9060:2018 revision. It is the ideal instrument for use in PV system performance mo

In addition to the primary hip stems the ECOFIT® hip system also offers the option of a short stem system. Both standard offset short stems and lateralised offset short stems are available as a cementless fixation option. The modular instrument platform provides the flexibility to intraoperatively