The Pick Sanitary Steam Injector is the preferred choice for in-line product cooking, CIP heating or nitrogen gas injection. The Pick SC heats or cooks any water-miscible liquid or slurry instantly on a continuous straight through basis. It can handle slurries containing bite sized particulate

CE marked (UKCA pending) – The EUROVENT accredited PEU exhaust air handling units have been specifically designed to efficiently control the emissions from commercial kitchens. Thanks to the PEU units, grease particles and vapors will be neutralised, and airborne cooking odours are typically below

PLP is Galletti’s new range of air-cooled packaged chillers and heat pumps for outdoor installation equipped with a modulating scroll compressor driven by an inverter and characterized by the use of R290 refrigerant. R290 (Propane) is a natural refrigerant capable of guaranteeing one of the lowest G

Flexalen® PU is a high-performance, pre-insulated plastic piping system for medium to large heating networks where maximum energy efficiency and flexibility must go hand in hand. The system combines PB-1 service pipes, bonded polyurethane (PUR) foam insulation with excellent λ-values, and protective

The range consists of 20 air-water models available as chiller and heat pump, with cooling capacities from 50 to 380 kW. The range’s main strongpoint is its high efficiency, not only as time efficiency (Class A Eurovent in chiller and heat pump mode) but especially as seasonal efficiency, aiming to

The new generation of oil-injected rotary screw compressors from Kaeser’s CSD series now delivers performance with even greater precision and efficiency. The integrated package consisting of motor, timing gears and airend permits the most energy-efficient airend speed to be selected for each operati

Flexalen® 600 offers one piping system for heating networks, cooling networks, and potable water, available as single or twin pipes, with and without EVOH layer, in coils or straight lengths with optional frost-protection cables (coils only). The PB-1 service pipes, made of closed-cell polyolefin fo

It’s been over 50 years since we started manufacturing automated distillation testers. Nowadays, we deliver to customers in more than 70 countries. ad-7 automatically performs distillation test of petroleum products as well as narrow boiling range samples. 10.4 inch LCD with tough panel has been ad

The MD Everest Cooling Tower is uniquely suited for applications with higher cooling demands, including data centers, district energy complexes, health science campuses and industrial complexes. It incorporates robust materials of construction and industrial-grade components, proven to withstand the

The Concept-HL jacking pipe type MRS 2.0 is a wastewater jacking pipe made of filler-free polypropylene according to DIN EN 1852-1 with a material-bonded multi-grid welded joint and short welding time, without an internal weld bead. Fixing the pipes during the cooling phase is not required. The Con

Since 1966, Tanaka has been delivering automated flash point testers for higher productivity at petroleum laboratories. The theme of the 8th generation model series is “ Ergonomic, Versatile, Robust and Safe “ ●Ergonomic: Color coordinated display and switches for high visibility / intuitive operat

Duravents' Factory-Built, UL-Listed Prefab Grease Duct is designed for efficiency, safety, cost savings, and compliance. It provides a plug-and-play alternative to traditional welded steel duct systems.

YWCT’s FRPPs are induced-draft cooling towers made of FRP. The structure of our FRPP series (support beams and columns) is made of composite continuous fiberglass pultruded sections that comply with CTI’s STD 37 and conform to ASTM E84D with a flame spread rating of below 25. FRPP cooling towers are

Since 1978, thousands globally installed, proving the VT0/1-previously called VXT- cooling tower reliability. Fans, motor and drive system (V-belt) are located in the dry air, preventing moisture and condensation. No external moving parts, helping it withstand the toughest weather. The thermal perf

The Varm Commercial Duo Series provides high-efficiency heating, cooling, and hot water with eco-friendly R290 refrigerant. It operates reliably at ambient temperatures down to -25 °C, delivers hot water up to 78°C, and with its wide capacity range, meets both commercial and industrial needs. With

model UC: remote electronic counter to connect to a mechanic, ultrasonic, electromagnetic meter installed over a return pipe; it is suitable to measure the thermal energy on heating and cooling systems; digital display with 8 digits plus special characters; powered by 10 years+1 lithium battery or o

Thermally strengthened glass, also known as semi-tempered glass, is commonly used in construction. Similar to tempered ESG glass, it offers greater mechanical and thermal resistance compared to annealed float glass, albeit with lower strength than fully tempered ESG glass. A distinguishing feature i

Toughened glass is safety glass. It is denoted by the acronym ESG (from German, Einscheiben Sicherheitsglas). It features higher elasticity, mechanical, and thermal strength compared to annealed float glass; it is safer because when broken, it shatters into small, non-sharp fragments. Tempering gla

System The process water enters the spray tree at top of the cooling tower, is sprayed down onto the heat exchanger surface or fill, giving up heat to the counterflowing air before returning to the system from the sump pan. Moist air does not enter the fan assembly, resulting in longer life and fewe

Mixal is a system consisting of multilayer pipes and different types of fittings suitable for any plumbing and heating system. Thanks to its extreme flexibility, it is the ideal product for the construction of radiant floor, wall and ceiling heating and cooling systems. Due to its excellent perform

Flexalen® 600 HP simplifies mono‑block heat pump installation by combining heating distribution and electrical cable routing in one compact, pre‑insulated system. The corrugated PE casing, polyolefin foam insulation, and PB‑1 service pipes provide the same high pressure/temperature resistance and mo

YWCT developed a medium size cooling tower (600 m³/hr – 2,000 m³/hr per cooling tower) made of pultruded FRP with integral FRP basin. The cooling tower is delivered to site in modules (sections) which reduces installation time on site to few days instead of weeks. In many cases, installing a medium

Nordan Marine’s CG replacement pump is designed for a long and reliable service life. It is constructed as a single-stage, vertical centrifugal pump. Its logical design and minimal number of components make inspection and maintenance straightforward. The pump is radially split, allowing the complete

Sigma Pro is an automatic multi-screen, polymeric filter for industrial water applications such as, wastewater treatment, cooling water, seawater and more. Designed for low pressures, the Sigma Pro Series is compact but with a large filtration area, and is water and energy efficient. It is easy to

With the AC BIO | AC IVF series, Auguste Cryogenics presents the new freezers of the AC Medical Family. Auguste Cryogenics developed the stainless steel containers in this series from the ground up using state-of-the-art technology. They are specially designed for the safe and economical long-term