Valsir S.p.A.

Cubik S is the most compact flushing system on the market with a width of just 300 mm. It is the ideal solution for installation in technical compartments, prefabrications and generally for all cases where space is extremely limited. It is a product of high mechanical performance, high technological innovation, using a unique soundproof container. In fact, Cubik S also benefits from Valsir's know-how in silenced waste systems: the tank is manufactured using a specially developed plastic compound, which is able to significantly reduce the noise perceived during cassette operation.

Winner S is the lowest flushing system available on the market at a mere 800 mm from the finished floor: it is a product of high mechanical performance, high technological innovation and uses a unique soundproof container. Winner S, in fact, also benefits from Valsir's know-how in silenced waste systems: the tank is manufactured using a specially developed plastic compound, which is able to significantly reduce the noise perceived during cassette operation. The countless installation possibilities at different heights, the diverse flush activations, the flexibility in positioning the control plate are the winning features of the innovative Winner S

Tropea S represents an absolute novelty on the international scene, a state-of-the-art and innovative product: the first cistern in the world designed to reduce the noise generated during use. The experience gained by Valsir in the Triplus, Silere and PP3 soundproof waste systems has enabled us to develop a special plastic compound with the aim of making the flush cistern silent. Laboratory tests show that the perceived noise from Tropea S is 5 times lower compared to the most widely-used cisterns on the market. Furthermore, the internal components of the Tropea S have been certified at the prestigious Fraunhofer Institute in Stuttgart as Class I quietness (both at 3 and 5 bar) according to ISO EN 3822. Tropea S is the only in-wall cistern on the market with a float valve and a stop valve certified at the top of the category in terms of reduced noise emissions

Duct banks are systems made up of pipe bundles, usually plastic and buried, through which various types of cables (fibre optics, power lines, telecommunications, etc.) are fed. Depending on the number of pipes and the distance to be covered, duct banks can be very large, with inspection chambers located several kilometres apart. These systems serve to protect the cables inside them against mechanical stresses and moisture, thus preventing potential oxidation damage. However, in traditional installations it is difficult to ensure a watertight seal between the duct bank and the inspection chamber, which can lead to water seepage and, in the most severe cases, the flooding of the chambers themselves. In such situations, the only solution is to pump out the water, which can be extremely expensive. The Polimask system – designed in combination with PPEcoforte pipes – has been developed to solve this problem. It is available in two versions: Polimask 110 and Polimask 160.

PPEcoforte is a high-strength pipe system with a triple-layer wall made of high-modulus polypropylene (PP-HM), suitable for underground, non-pressure sewage pipelines, in RAL 8023 on the outside and RAL 9003 on the inside. To complete the system, moulded and thermoformed fittings are available in compact PP-HM in RAL 8023. The use of PP-HM makes it possible to create a high-performance system in terms of resistance to loads, bending, and internal and external abrasion. The PP Ecoforte system complies with the UNI EN 13476 standard and includes a wide range of accessories to create an efficient sewage system.

Pexal Gas is a multilayer pipe and fitting system for the transport of fuel gas in the domestic sector: international certifications obtained over the years on the Pexal Gas system in Italy, Australia, New Zealand and Ukraine testify to its reliability and quality. Valsir offers the widest range of diameters on the market, from 16 to 75 mm, available both in bars and in rolls already equipped with a protective, self-extinguishing and UV-resistant corrugated sheath in class 320 in accordance with EN 61386.

Pexal Brass is a press fitting system with a brass alloy body and stainless steel sleeve that are suitable for a multitude of applications, from hot and cold drinking water distribution systems to heating systems and industrial installations. Pexal Brass can be used both with the Pexal, Mixal and Thermoline pipes.

Mixal is a system consisting of multilayer pipes and different types of fittings suitable for any plumbing and heating system. Thanks to its extreme flexibility, it is the ideal product for the construction of radiant floor, wall and ceiling heating and cooling systems. Due to its excellent performance, it is used in the distribution of hot and cold drinking water, radiator and convector heating systems, and industrial systems, including compressed air distribution.

THE MULTILAYER SYSTEM OF EXCELLENCE State of the art multilayer technology. An unequalled range, available in diameters from 14 to 110 mm.