Dry Pipe Valves for use as an automatic means of controlling water flow to automatic dry-pipe sprinkler systems. Vertical orientation. Peroxide cured EPDM with Fabric Diaphragm. NFPA 13 Standard. Latched Clapper Type. Air Supervisory Pressure Switches included. Rated Working Pressure 5 – 300 psi. CE

Special System Water Control Valve. Electrically (Solenoid) activated Deluge Valve for use in Dry Pipe Fire protection systems. Superior design offers low pressure losses at high flow rates. UL Listed to UL 260 Dry Pipe and Deluge Valves for Fire-Protection Service. Flanged and Grooved Ends availabl

The Inbal water and concentrate foam deluge system is specifically designed for use in Fire Protection Systems consisting of unpressurized dry piping and open sprinkler heads and is activated by heat or smoke or flame detection and release system of dry pilot fusible plugs /sprinklers. The Inbal Au

Description This gate valve is a resilient-seated NRS (Non-Rising Stem) type with flanged ends, designed to provide a bubble-tight seal and reliable shut-off in piping systems. It is approved for fire protection applications and built with durable materials to withstand high pressure. Product Infor

The GW Thermospray medium velocity nozzle is designed for directional spray applications in fixed water spray (deluge) systems. The angle of the external deflector determines the direction and shape of the water spray, consisting of low to medium velocity droplets. The GW Thermospray nozzle is avai

The CLA-VAL Model 134E/D-41 Solenoid Control Valve is an on-off control valve which either opens or closes upon receiving an electrical signal to the solenoid pilot control and a local reset action. This valve consists of a 100G/2100G U.L. listed HYTROL main valve, a three-way solenoid valve, an aux

The range of FM 4020 Galvanised Tanks, also known as FM GI Tanks, is made of hot-dip galvanised steel sheet, which offers exceptional corrosion resistance, toughness, and longevity. – Application: Water Storage for Fire Fighting. -Standards for the Kymik FM GI Tank include NFPA 22 and FM 4020. -The

MIFAB® SUPER-1500-FM hydro mechanical grease interceptor with 1,522 U.S. gallons of liquid holding capacity has a limited lifetime warranty and is made in the U.S.A. out of seamless, rotationally molded High Density Polyethylene with 3/8” uniform wall thickness. Interceptor is designed for above or

High temperature resistant, according to Hydrocarbon curve over 30 minutes up to 1000 °C tested barrier, to retaining burning and non-burning, solid and liquid substances. By hand-to-use, secure sealing barrier – consists of a perpendicularly standing metal barrier body with revolute joint and a bar

High temperature resistant, according to Hydrocarbon curve over 30 minutes up to 1000 °C tested barrier, to retaining burning and non-burning, solid and liquid substances. Automatically and without external energy closing and secure sealing barrier – consists of a perpendicularly standing metal barr

Safeprotex Silicone-coated fiberglass fire blanket is an economical solution specifically designed to control electric vehicle (EV) fires in short-duration emergencies. With a continuous temperature resistance of 550°C (1022°F), the silicone coating enhances silicone coated fire blanket’s performanc

Electrically weldable and injection-molded polyethylene PE100 pipe and fitting system. The ELOFIT – NADIR pipe and fitting system is mainly manufactured from diameter 20 mm to diameter 630 mm, for pressurized applications for water supply and treatment (drinking, brackish, seawater and wastewater)

Electrically weldable and injection-molded polyethylene PE100 pipe and fitting system. The ELOFIT – NADIR pipe and fitting system is mainly manufactured from diameter 20 mm to diameter 630 mm, for pressurized applications for water supply and treatment (drinking, brackish, seawater and wastewater)

Electrically weldable and injection-molded polyethylene PE100 pipe and fitting system. The ELOFIT – NADIR pipe and fitting system is mainly manufactured from diameter 20 mm to diameter 630 mm, for pressurized applications for water supply and treatment (drinking, brackish, seawater and wastewater)

Application Area: Fire Protection Sprinkler Systems Production Range: 1/2" - 10" (21,3 – 273,1 mm) Production Standards: TS EN 10255, ASTM A53, ASTM A795 Surface Protection: Hot Dipped Galvanized, Water Based Painting, Epoxy Finishing Operations: Plain End (Square Cut or Bevelled), Threaded and Coup

Produced in Ductile iron according to ASTM A - 536 grade 65 - 45 - 12, with sealing gasket and together with their corresponding clamping components. They are available with hot dip galvanised or red painted finish. This articles are suitable for fluid transport such water, oil free air, and a broad

VEXTRA® (GLV) is a heavy duty, heavy weight, fiberglass fabric coated with vermiculite. These products have been tested and FM approved as a welding curtain. The vermiculite coating acts as an armor—it is inorganic, chemically inert, noncombustible, odorless and provides 50% more protection from dir

The Safeprotex Vermiculite-Coated Fiberglass Welding Blanket is made from vermiculite-coated fiberglass fabric, where the vermiculite coating forms a protective layer on the fiberglass surface. This advanced coating technology allows welding blanket to endure fixed working temperatures up to 810°C (

Grooved accessories of ATUSA are available with hot dip galvanised or red painted finish. This articles are suitable for fluid transport such water, oil free air, and a broad range of chemical products. The EO grooved fittings are fire protection systems certified according to FM Approvals 1200, UL

Tanks made of Kymik-Zincalume Bolted Panels are frequently used to store fire water. The Kymik Fire Fighting Water Storage Tanks are made in compliance with the standards for the sector. The design standards are FM 4020 and NFPA 22, in that order. Kymik has demonstrated its capacity as a producer to