Design Standards: 1) API 600 (ISO-10434)/API 6D/ASME B16.34 2) BS 1873/ASME B 16.34 3) BS 1868/API6D/ASME B16.34 Size Range: 1) Gate Valve:- ANSI Class 900 : 1/2" to 36" ANSI Class 1500 : 1/2" to 24" ANSI Class 2500 : 1/2" to 24" 2)Globe Valve :- bbANSI Class 900 : 1/2" to 24" ANSI C

Cast/Forged Steel Check Valve

FEATURE Standard port, 1/4″~2″ (DN8~DN50) W.P. : 2160 WOG W.T. : -20°C~200°C (-4°F~392°F) Investment casting Blow-out proof stem Anti-static device (option) Locking device ISO 5211 mounting pad Seal welded ends ASME B16.34 Wall thickness NACE MR0175 API 607 Fire safe approved API 608 Design Thread t

MSS-SP-144 Design | Optimized for High-Pressure & High-Temperature Horizontal Flow Applications Valvosider Y-Pattern Lift Check Valves with Pressure Seal Bonnet are engineered to prevent backflow in high-pressure, high-temperature horizontal pipelines, especially in power generation and process appl

A revolutionary design of triple offset geometry, a progressive contact angle, an innovative double-inclined seat cone axis, a self-adaptive sealing system and a metal-to-metal sealing are a few examples of the unique features of our JTE triple offset butterfly valve. Especially designed for extreme

The IMI C-REX™ double eccentric segmented ball valve delivers reliable, high-cycle performance in severe service applications. Designed for bi-directional tight shutoff, it features a cavity-free, torque-seated design that enhances durability and minimises wear. Available in sizes from DN 12 to 900

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

The JBT & JBTM Series are Trunnion-mounted ball valves designed with vanguard engineering and highly sophisticated technology. Our in-house High Velocity Oxygen Fuel-sprayed hard faces allow them to defy the toughest operating conditions, such as high pressure, abrasive and corrosive mediums, slurri

The O-Rex™ Double Eccentric Ball Valve is designed for severe service applications, delivering low torque operation, extended durability, and reliable bi-directional shutoff. Combining the robustness of a trunnion-mounted ball valve with the efficiency of a triple offset butterfly valve, it ensures

Sealing is increased as the pressure is raised if the pressure is raised using the valve box and the lid using internal pressure. This structure is used primarily on high pressure fluids. For high temperature and high pressure, the sheet surface of the valve body and the valve seat is enforced as

The IMI Orton MV Series triple eccentric metal seated valve ensures leak-tight performance in high-pressure, high-temperature, and cryogenic applications. Featuring a precision-engineered triple-offset design, it eliminates sealing surface friction, enhancing durability and reliability. With bi-dire

Bonney Forge manufactures Double Block and Bleed Valves ( DDB valve) in an extensive range of designs, materials, sizes, pressure classes and end connections that are designed in accordance to ASME B16.34 and where applicable API 6D or BS EN ISO 17292. The valves are fire-safe test approved and inc

JSB Series V-segment valve is the segment ball with V-notch design for both regulating and shut-off services. The high valve capacity with optimum flow characteristics provides the ideal solution in flow control.

Forged trunnion ball valves are an excellent choice for on/off service in large and high pressure applications because the ball is anchored at the top and bottom of the design. Bonney Forge is a trunnion mounted ball valves manufacturer in an extensive range of designs, materials, sizes, pressure cl

Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, and spiral wound gasket, made in F316L/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and sealed welded joint. O

Bonney Forge forged steel integral flange valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded

Bonney Forge cryogenic valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded join

Trunnion mounted ball valves are engineered for high-pressure systems and large sizes. The ball is fixed in place, reducing torque and seat wear. Widely adopted by European valve manufacturers for critical pipelines. Our stock valves offer unmatched reliability with prompt delivery. Partner with top

Swing check valve, Bolted cover Renewable disc and seat (in S.S. construction, integral seat non renewable)

The IMI Orton MV Cryogenic Series is a triple eccentric metal seated valve engineered for LNG, cryogenic, and extreme low-temperature applications. Its precision triple-offset design eliminates seal friction, ensuring zero-leakage bi-directional shutoff. Built to withstand temperatures from -254°C t

The trunnion mounted side entry ball valve is the most popular ball valve design for Oil & Gas application. The ball is held on a fixed vertical axis and is free to rotate around it. Sealing is assured by pressure & spring energized seats. For small sizes, the ball is supported by a trunnion, while

Floating ball valves, construction to ASME B16.34 – ASME VIII Div.II, 2 piece bolted body, split body,side entry, flanged RF/RTJ to ANSI B16.5, face to face to ANSIB16.10, full/reduced bore, ISO (5211) top work standardized for actuation, metal seated (ball & seats with Tungsten or Chromium Carbides

The Top Entry ball valve design is characterized by one-piece body construction with top access to all internal components. Top Entry Ball Valves are the preferable solution when it is required to perform in line maintenance and when the reduction of possible leakage path is mandatory. The body can