Complies with UNE 53994 specifications for single-layer high-density polyethylene drainage pipe. Color: yellow RAL 1018. Packaging: 50 or 40 meter rolls with one coupling per roll. Class SN2, impact resistance 14J

Arched tubes with a flat base and corrugated inner wall in the upper and lateral generatrices, manufactured in PVC-U according to UNE 53994 standard. Blue color. Available in 6m bars.

High molecular crosslinked polyethylene (PEX) with minimum bending radius of 6× the diameter at 68°F (20°C). Maximum operating temperature 180°F @ 100 psi (82°C @ 7 bar). Red printing for identification of hot water lines. The PureLink® Plus PEX-a tubing may be used with fittings that are compliant

Connecting pipes for geothermal circuits. Made of high-density polyethylene PE4710 listed in the Plastics Pipe Institute (PPI) TR-4 listing Available in diameters from 3/4″ to 8″, SDR 13.5, SDR11 and SDR9 thicknesses. Various stick, roll and coil lengths available.

The product page for the Linear Catch Basin mentions several standards and certifications: - **BNQ 3624-120**: Standard for polyethylene pipes. - **CSA B182.8**: Standard for plastic pipe drain and sewer pipe. - **ASTM A36**: Standard specification for carbon structural steel. - **ASTM A123**: Stan

Geothermal loops certified to ANSI/CSA/C448 and NSF/ANSI 358-1 standard. Available in 3/4″, 1″, 1 1/4″, 1 1/2″ and 2″ diameters. Factory made from Versapipe HD100 GEO pipes. Custom lengths from 200′ to 3,000′ depending on project requirements. Factory sealed and pressurized for guaranteed fit on sit

The Beaver Barrier product page does not mention any specific standard numbers, certifications, or compliance references.

With our PVC wastewater mouldings, we offer a ready-made solution for almost any challenge. Thanks to our numerous and versatile production methods, the possibilities are almost endless. We produce an extensive range of fittings from ø110mm to ø630mm in various colours and individual designs. The fl

We offer a wide range of fittings for non-pressure sewage pipes in ring stiffness SN4. Our injection-moulded PVC wastewater fittings are mainly intended for interior drainage and rain gutter systems. These fittings are available with diameters up to 160 mm. They are not only available in the colour

The SYSTEM SK lip seal ring with reinforcing ring (PP) is developed for plastic pipes and fittings in compliance with EN 1451-1 (DIN 19560) and EN 1401-1 (DIN 19531/DIN 19534). The socket dimensions recommended by M.O.L. apply as well as for other pipe systems. SYSTEM SK seals have outstanding prop

The SYSTEM EL lip seal ring with reinforcing ring (PP) is developed for pipes and fittings made of PVC/PP (DIN 19534, EN 1401-1, EN 1852). SYSTEM EL seals fit firmly into the socket due to the reinforcing ring. The favourable ring geometry combined with a soft rubber quality (40±5 IRHD) results in l

The SYSTEM BL lip seal ring is developed for plastic pipes and fittings made of PP and PVC in compliance with EN 1451-1 and EN 1401-1 and meets the requirements of EN 681-1 WC. The socket dimensions recommended by M.O.L. apply as well as for other pipe systems. The SYSTEM BL seal is mainly used for

The SYSTEM DD lip seal ring with reinforcing ring (PP) is developed for plastic pipes and fittings made of PP and PVC in compliance with EN 1451-1 and EN 1401-1 and meets the requirements of EN 681-1 WC. The socket dimensions recommended by M.O.L. apply as well as for other pipe systems. The SYSTEM

PE fittings are obtained by thermoforming, butt welding and hard-facing for aqueducts, waste water discharges and biogas systems.

High-density polyethylene pipes suitable for various applications, including water transmission, gas distribution, and wastewater collection.

Alfaidro NOFIRE Multilayer Pipe (FASER SDR 7.4) is the alternative to metal systems in the fire protection sector. The PP-RCT pipe with a special flame retardant additive has a glass fibre middle layer that gives the pipes greater dimensional stability. In fact, one of the main advantages of NOFIRE

MrPEX® POTABLE PEX-a Tubing is Cross-Linked Polyethylene (PEX-a) manufactured in accordance with ASTM F 876. Tubing is listed to ASTM F 876/F877/F2023, ASTM E84 (CSA B137.5), cNSFus-pw, NSF/ANSI-61, NSF/ANSI-14, Annex G, NSF U.P.Code PEX 5106, ICC-PMG, ANSI/AWWA 904. MrPEX® POTABLE PEX-a tubing is r

Electrically weldable and injection-molded polyethylene PE100 pipe and fitting system. The ELOFIT – NADIR pipe and fitting system is mainly manufactured from diameter 20 mm to diameter 630 mm, for pressurized applications for water supply and treatment (drinking, brackish, seawater and wastewater)

Electrically weldable and injection-molded polyethylene PE100 pipe and fitting system. The ELOFIT – NADIR pipe and fitting system is mainly manufactured from diameter 20 mm to diameter 630 mm, for pressurized applications for water supply and treatment (drinking, brackish, seawater and wastewater)

Electrically weldable and injection-molded polyethylene PE100 pipe and fitting system. The ELOFIT – NADIR pipe and fitting system is mainly manufactured from diameter 20 mm to diameter 630 mm, for pressurized applications for water supply and treatment (drinking, brackish, seawater and wastewater)