A patented invention that finally solves the inherent uncertainties in wind direction measurements. By adding a Geovane to your wind measurement campaign configuration you will get the most accurate wind direction data available on the market today. Guaranteed!

PGC manufactures forged and machined parts in large quantities for the Oil and Gas Production and Drilling Industry: Subsea, Platform and Land. Bolts: Stud, Bonnet, Riser, Connector, 12-pt, Hex, Flange, Socket Nuts: 12-pt, Hex, Flange, Round, Slotted, Cap Washers: Flat, Bevel Materials: MP35N, 20Mo

PGC manufactures forged and machined parts in small and large quantities across most subsets of the Power Generation Industry: Rotor and Combustion Hardware for Gas Turbines, Steam Turbines and Wind Powered Turbines. Bolts: Stud, 12-pt, Hex, Flange, Socket Nuts: 12-pt, Hex, Flange, Round, Slotted,

Power Gen Components' products are second to none. Utilizing our state-of-the-art fastener manufacturing equipment and highly experienced manufacturing production team, we are able to create any standard nut, bolt and fastener for power generation and oil & gas applications. In addition, our custom

Accurate. The DryCal 800 has industry-leading accurate flow measurements down to 0.5 sccm. The DryCal 800 is more than 4x more accurate than most flow meters, giving you the ability to calibrate with confidence. Quality. Backed by our ISO 17025 accreditation by NVLAP of NIST. “NVLAP Lab Code 200661-

High accuracy. Calibrators in Mesa’s DefenderTM Series are backed by Proven DryCal® technology and have a reading uncertainty of less than 1%. Durability. All DryCal calibrators are field-proven and have provided IH professionals with reliable performance for decades. Real-time flow data. Calibrat

ISO 17025 Accredited The Primary Calibrator 4046 has a range of 2.5 to 300 liters per minute (L/min).

ISO 527-4, ISO 527-5, ASTM D3039, EN 2561 ASTM D3039 describes the standard method for tensile testing polymer matrix composites It covers test methods for a wide range of specimen dimensions as different testing configurations. The specimens is generally prepared with tabbed ends that allowed for a

ASTM D638, ISO 527-1, ISO 527-2, JIS K7113 ASTM D638 method is used to determine tensile properties of plastics The most significant properties are: tensile strength, strain at rupture and yield modulus, for quality control and mechanical specifications. Generally, samples are: rigid, semi-rigid, an

Applications: Test to ISO 14126, prEN2850, Airbus AITM 1-0008, ASTM D3410, ASTM D6641, JIS K 7076, RAE TR 88012 CRAG methods 400 and 401, QVA-Z10-46-38, ASTM C1358, Airbus document X88SP1105735: “Plain compression test according to AITM 1.0008 A1 and A2 with ZwickRoell HCCF” 'Plain', 'open hole and

Chemical Protective Suit with Integrated Mask Seal This high-performance chemical protective suit is designed for operations under extreme conditions and provides reliable protection against hazardous liquids, gases, and chemical substances. The system ensures a continuous, gas-tight barrier even u

Messilot Wire rope manufacturing produces a variety of Steel Wire Ropes for elevators in different buildings and diameters ranging from 6mm to 18mm.

The high-strength fiber rope for lifting applications was developed specifically for use on tower, mobile and crawler cranes. The comparison to steel wire rope leaves no doubt. Teufelberger is the only rope specialist worldwide that is leading in both the wire rope and the fiber rope world. In a jo

Wire Rope Lifting Sets for Offshore Containers, manufactured and certified in compliance with DNVGL-ST-E271 / ISO 10855-2 / EN 13414-1

Wire ropes class 6x19-6x36 with fiber core. L = Nominal length of the sling, measured between the load-bearing points of the sling. The minimum length of the sling is 33 times for RR/T type. The actual length of the product, measured without applied load, may differ from the nominal length conside

TWire ropes class 6x19-6x36 with fiber core. The minimum length L of the sling is 50 times the wire rope diameter for type AA/T and 33 times for RR/T type. On request the slings can be supplied with cylindrical conical ferrule. Used thimble type RL, other types available on request. L = Nominal len

Wire ropes class 6x19-6x36 with metallic core L = Nominal length of the sling, measured between the load-bearing points of the sling. The minimum length L of the sling is 50 times the wire rope diameter. The actual length of the product, measured without applied load, may differ from the nominal

Wire ropes class 6x19-6x36 with steel core. L = Nominal length of the sling, measured between the load-bearing points of the sling. The minimum length of the sling is 50 times the wire rope diameter. Used thimble type RL, other types available on request. On request the slings can be supplied R

Includes CompactTrac, PowerTrac, TopTrac, and HyTrac, offering advanced performance for elevator systems.

Elevator rope with fiber core, providing a balance between strength and flexibility.

Special rope with steel-reinforced fiber core for elevators, designed for enhanced durability and performance.

Special full steel rope with 9 outer strands for elevators, designed for enhanced load-bearing capacity.

Special full steel rope with IWRC (Independent Wire Rope Core) for elevators, providing superior support and stability.

Special rope with steel-reinforced core for elevators, offering improved strength and longevity.