Elsta Mosdorfer

Maximum flexibility with minimum size Space-saving, factory-built aluminium compact transformer stations for deployment in energy supply companies, e-mobility, commercial and industrial businesses. Combined with integrated low-voltage distribution for various transformer power ratings, our compact stations offer maximum flexibility with minimum space requirements. The lightweight and robust construction allows for lifting and transport in a fully assembled state (including transformer). Standard-tested and safe ELSTA compact transformer stations are low-maintenance, durable and designed to meet strict safety and handling requirements. All our stations are type-tested (in accordance with IEC 62271-202) and, in combination with certain switchgear, have IAC AB 20 kA/1s fault arc qualification. They therefore offer a high level of protection, particularly for personal safety. All low-voltage distribution systems manufactured by ELSTA Mosdorfer meet the requirements of the IEC EN 61439 series of standards. Instead of being installed in the compact station, the low-voltage distribution can also be mounted as a panel or frame in enclosed electrical operating rooms.

A high-quality complete package Practical installation accessories and matching system components for modifying and extending the ELSTA Mosdorfer base products. Effective accessories with added value For moving ELSTA Mosdorfer ground-mounted bases or floor-mounted bases professionally, we offer the right accessories for easier installation and preventing the formation of condensation in the distribution cabinet. Plastic base grid for stabilisation when embedding (floor grid) Base filler to reduce condensation formation in the distribution cabinet (hydrophobic or expanded clay) Absorption mats as additional sealing against the soil Retrofit kit for implementing construction site power for subsequent conversion of sealing plugs to sliding covers (with and without strain relief) Additional plates for subsequent closing of ground-mounted bases to the ground, for example when moving to steep slopes

Temporary cable entry with safety aspect The ideal solution from ELSTA Mosdorfer for temporary cable outlets with closed cabinet doors, for example for marketplace distributors, power outlet distribution cabinets or for campsite cabinets. Connection of cables and wires with closed cabinet door The polyester base from ELSTA Mosdorfer in the fairground version is available as ground-mounted base and as floor-mounted base. A strain-relieved cable entry is possible via a swiveling front plate. This means that no door cutout is necessary and the base can be securely closed from the inside after use. The bases are used e.g. in public places, event sites and also on campsites. The material is good UV and weather resistant and extremely resistant to chemicals. Fairground bases (ground-mounted version) with heights of 950 mm and 1200 mm Fairground bases (floor-mounted version) from height 500 mm Cabinet mounting dimensions in accordance with DIN 43629-2 and ÖNORM E 4382 Special sizes created based on these standards Available in the colours RAL 7035 or RAL 7032 Integrated strain relief rail (anchoring rail or angle section) for cable attachment by means of clamps Plastic base grate (floor grating) is recommended for stabilisation when embedding Base filler is recommended to reduce condensation formation in the distribution cabinet (Hydrophob or Blähton available as an accessory). This greatly reduces the moist air rising from the soil.

Gain additional height With the ELSTA Mosdorfer base extensions, the cabinet connection area is increased upwards for ground-mounted or floor-mounted bases. Tailor-made extension for existing bases The polyester base extensions from ELSTA Mosdorfer in the standard heights of 250 mm and 500 mm can be accurately placed on top of a ground-mounted or floor-mounted base, thus extending the area from the floor/ground level. Base extensions are used, for example, in flood areas, on steep slopes or to subsequently raise the bottom edge of the distributor (bottom edge of meters). The material has good UV and weather resistance to match the existing bases, and is highly resistant to chemicals. Perfect fit for ELSTA Mosdorfer polyester ground-mounted and floor-mounted bases Cabinet mounting dimensions in accordance with DIN 43629-2 and ÖNORM E 4382 Special sizes are created on the basis of these standards Available in the colours RAL 7035 or RAL 7032 Base extension for example as flood protection or connection compartment extension

Fixed base for distributor installation at floor/ground level Floor-mounted bases from ELSTA Mosdorfer are used as the foundation for freestanding distribution cabinets on existing foundations. They are used in areas where a foundation already exists or embedding is not possible. Stable base-unit with high weather resistance The polyester floor-mounted bases from ELSTA Mosdorfer are secured to a suitable concrete surface. When fully installed, they form a stable unit with the freestanding distribution cabinet. The short bases are used, for example, on pavements, car parks or even in indoor applications as cable space. Like the ELSTA cabinet, the ELSTA base is made of hot-pressed, glass fiber-reinforced polyester and has good UV- and weather resistance is highly resistant to chemicals. Cabinet mounting dimensions in accordance with DIN 43629-2 and ÖNORM E 4382 Special sizes created on the basis of these standards Available in the colours RAL 7035 or RAL 7032 Integrated strain relief rail (anchoring rail or angle section) for cable attachment by means of clamps Openings in the side parts for temporary connections, for example for construction site power (sealing plugs or slide covers)

The right base for every cabinet ELSTA Mosdorfer has a wide range of standard bases and special sizes for freestanding distribution cabinets as a foundation for embedding into the soil. Stable base-unit with high weather resistance The polyester ground-mounted bases from ELSTA Mosdorfer, with heights of 950 mm and 1200 mm, are embedded into the soil down to a defined depth of 600 mm or 850 mm. When fully installed, they form a stable unit with the freestanding distribution cabinet. Like the ELSTA cabinet, the ELSTA base is made of hot-pressed, glass fiber-reinforced polyester and has good UV- and weather resistance is highly resistant to chemicals. Cabinet mounting dimensions in accordance with DIN 43629-2 and ÖNORM E 4382 Special sizes created based on these standards Available in the colours RAL 7035 or RAL 7032 Integrated strain relief rail (anchoring rail or angle section) for cable attachment by means of clamps Openings in the side parts for temporary connections, for example for construction site power (sealing plugs or slide covers) Plastic base grate (floor grating) is recommended for stabilisation when embedding Base filler is recommended to reduce condensation formation in the distribution cabinet (hydrophobic or expanded clay available as an accessory). This greatly reduces the moist air rising from the soil.

AC collector cabinets, metering and transformer cabinets for photovoltaics The cabinet systems and connection-ready distribution cabinets from ELSTA Mosdorfer form the perfect foundation for standard-compliant and safe operation of photovoltaic systems in open areas, on slopes or on hall roofs. A proven range of products for special operating conditions We took known and proven product groups and made them more resilient for use in PV systems taking account of the special requirements in the area of photovoltaics, thus ensuring the maximum personal and system safety. The supply infrastructure of large systems is often located outdoors, which is where the polyester cabinets from ELSTA Mosdorfer are most at home. The application entails high currents during maximum sunlight, so the design of PV products has to take special account of the additional power input. AC collector cabinets (PV-cable distribution cabinets) with and without islanding protection system for network monitoring Metering cabinets for PV surplus feed-in in small private installations Transformer cabinets and transformer measuring fields in a special design for connecting the PV system to the public low-voltage power grid (for example, in combination with a collector cabinet and islanding protection system) UV-resistant enclosure for freestanding installation on a ground-mounted base or for wall installation outdoors

Metering cabinets and end distributor cabinets with power outlets Metered and unmetered distributor cabinets with power outlets for the power supply in public places, event sites or in commercial and industrial applications form part of the product range of ELSTA Mosdorfer. Fixed and mobile fairground distributor cabinets with and without measuring equipment The robust and weatherproof polyester distribution cabinets and distributor pillars from ELSTA Mosdorfer are either permanently mounted on bases, or equipped with a mobile underframe for temporary power supply. For the metered design variant (connection end distributor), the grid access and direct/indirect measurement take place directly in the distribution cabinet in accordance with the design guidelines of the grid operators in the specific regions. The unmetered end distributors are a simple and reliable solution for the power supply for centrally metered installations (e.g. trade fair sites). Polyester enclosure (hot-pressed, glass fibre reinforced, thermoset) Degree of protection IP 44, protection class II, IK classification IK 10 Configured with/without metering part, with internal CEE and safety power outlets including fuse protection (outside power outlets with optional cover) The installation field suitable for use by laypersons with power outlets and the patch panels that are not suitable for use by laypersons can be locked separately Freestanding installation on ground-mounted or floor-mounted base in a fairground version, cable outlet through the base Mobile variants with base plate including base frame, cable outlet through a door opening

Systematic sub-distribution outdoors and indoors The totally protected field distributor cabinets from ELSTA Mosdorfer are used for sub-distribution in the metered area outdoors and indoors. The universal interior fittings enable a variety of possible applications, each with the matching type of installation. Resilient sub-distributor cabinets with flexible interior fittings Free-standing polyester cabinets or flush-mounted and surface-mounted distribution cabinets made of polyester or thermoplastic are expanded into individual sub-distributor cabinets with the appropriate protection rating. A flexible interior fitting system enables the development of equipment panels for rail-mounted devices, patch panels with top-hat rails or busbars, as well as mounting plates for adding various components or power outlets. Outdoors: free-standing installation distributor cabinets, power outlet distribution cabinets, instrumentation and control cabinets or supply cabinets for e-mobility Indoors: surface- and flush-mounted distributor cabinets for classic apartment distribution through to free-standing distributor cabinets for sub-distribution in larger buildings

Safe distribution of metered energy outdoors and indoors For further energy distribution after metering or transformer cabinets outdoors and indoors, ELSTA Mosdorfer offers a wide range of totally protected fuse distributors and cable distribution cabinets for commercial and industrial use as well as for functional buildings. Complete cabinets for individual energy supply for commerce and industry Whether free-standing or flush/surface-mounted variants: The main distribution cabinets from ELSTA Mosdorfer are optimally adapted to customer requirements regarding the installation location, capacity and connection options. Our certified cabinet and enclosure systems made of polyester or thermoplastic form the basis, and fit ideally with the upstream ESC distributor cabinets and metering cabinets. The enclosures are configured with short-circuit tested copper busbar systems or mounting plates, equipped with D02 or NH switching devices and are connection-ready. Lightning and/or surge arresters, components for the distribution and control of energy, as well as connection options for large cross sections are other important elements of this product group. Outdoors: pump controllers, sprinkler irrigation systems, sub-distribution for commercial and industrial operations or for systems in open areas without building infrastructure Indoors: sub-distribution in industrial and commercial construction and residential construction, such as main distribution after an interior transformer cabinet Configuration operable by laypersons in accordance with IEC 61439-3 or non-operable by laypersons in accordance with IEC 61439, depending on the design and switching devices

Weather-resistant housing for gas as a medium Polyester cabinets from ELSTA Mosdorfer are used to protect outdoor gas connections and meet the different regional specifications of the gas distribution network operators. Installation-friendly outdoor gas connection for single and multiple customer systems If the installation and connection of gas meters has to take place outside, then the UV and weather resistant DIN outdoor enclosures from ELSTA Mosdorfer are used for the installation of gas meters and fittings. The corrosion-resistant and maintenance-free cabinets are either free-standing and placed on a standard, ground-mounted base or built into an exterior wall. By installing outdoors, there is no need for a connection room in the building, and in addition the supply company has access at any time. The cabinets are delivered ready to be installed, which enables quick installation on-site. Enclosures adequately ventilated, IK classification IK 10 Built specifically for the region concerned in accordance with the design guidelines of the grid operators Mechanical stability qualified and tested in accordance with the requirements of IEC 61439-3 Free-standing installation on a standard base or flush-mounted in the wall base or flush-mounted in the wall

Totally insulated distributors for direct measurement Metering and metering distribution cabinets made of thermoplastic from ELSTA Mosdorfer for surface- or flush-mounting for direct measurement of electrical energy, mainly indoors. Complete metering cabinets, flush/surface-mounted, equipped and ready for connection Modular, standard, plastic metering distributor cabinets and meter cabinets in class II as a complete solution. The ELSTA Mosdorfer interior system is a flexible system for the construction of single and multiple customer systems with up to eight metering panels. The insert is easily removed for the installation. The distributors are constructed in accordance with the specific regional requirements of each supply area, and delivered either unequipped or partly/completely equipped. Protection class II, IK classification IK 10 Built specifically for the region concerned in accordance with the design guidelines of power grid operators Qualified and tested in accordance with the requirements of IEC 61439-3 Indoor variant with flush- or surface-mounting with protection rating IP 30D Outdoor and indoor use only when flush-mounted (installed in wall with plaster frame) with protection rating IP 43 Delivered either empty (prepared for development), partially equipped with a pre-metering fuse, metering loop and meter terminal or fully-equipped with customer-specific equipment Standard metering distributors with/without post-metering distribution or with a mounting plate Overhead power line and cable house connection metering cabinets

Safe measurement of high currents outdoors and indoors Transformer measurement panels from ELSTA Mosdorfer are used as current-measuring devices for large commercial and industrial consumers with high energy requirements, as well as for larger photovoltaic systems or construction sites. Why not take a closer look at our outdoor and indoor transducers, designed to meet the regional specifications of all of Austria. Indirectly metered energy with many options Wherever normal metering cabinets meet their performance limits, the measurement of high currents takes place indirectly. Current transformers are used to transform high currents into small secondary currents thereby making them measureable. The free-standing base installation, the various cabinet constructions, and the optionally integrated main fuse or main distribution make the ELSTA Mosdorfer transformer cabinets into an ideal metering solution. Protection rating IP 44 or higher, protection class II, IK classification IK 10 Built specifically for the region concerned in accordance with the design guidelines of power grid operators Qualified and tested in accordance with the requirements of IEC 61439-2 Outdoor variants in high and low (wider) construction for installation on ground-mounted or floor-mounted bases Low-profile construction is recommended for unprotected ground-mounted setup due to expected wind loads Indoor variants (high construction) with an integrated fixed base as cable space Mobile variants as temporary construction site power or for events Cable entry facilitated by removable baseboard (connecting strip)

Free-standing distributor cabinets for direct measurement outdoors The polyester metering and metering distribution cabinets from ELSTA Mosdorfer for direct measurement of electrical energy outdoors provide extensive functionality. Totally insulated outdoor metering distributor cabinets as a single or multiple customer system When electrical energy has to be metered outdoors, weather-resistant polyester enclosures are built with the right interior system to create totally insulated metering cabinets. The metering connection cabinets, which can be used by laypersons, can be found, for example, at property boundaries, in garden walls or on facades in private residential construction. Multi-customer systems are used, for example, in holiday home developments or on allotment sites. Free-standing metering distributor cabinets are a familiar sight outside buildings or in the open for use by electricity supply companies, commercial or industrial use. Protection rating IP 44, protection class II, IK classification IK 10 Built specifically for the region concerned in accordance with the design guidelines of power grid operators Qualified and tested in accordance with the requirements of IEC 61439-3 Free-standing installation on a standard base or surface-mounted on the wall or flush-mounted in the wall Empty (prepared for development), partially equipped with a pre-metering fuse, metering loop, meter terminal or fully-equipped with customer-specific equipment Standard metering distributors with/without post-metering distribution or with a mounting plate Overhead power line and cable house connection metering cabinets

Plastic connection cabinets and pillars as grid branches House service boxes, cable transfer boxes and pre-metering fuse boxes made of polyester are used at the interface between the supply network and the private power grid. Safe connection of private consumer installations to the public electricity network ELSTA Mosdorfer makes totally insulated (protection class II) plastic grid junction boxes and fuse distributor cabinets that are adapted to the network infrastructure in the respective coverage area, and form the boundary between the distribution network and the consumer installation. The enclosures are made of UV-resistant polyester with a protection class that is designed for the place of use (outdoor/indoor). The enclosures are equipped with terminals for the cable feedthrough or with D02 or NH built-in devices. Constructed specifically to the region concerned, in accordance with the specifications and design guidelines of the power grid operators Fastening to roof stand pipes (plastic roof stand box) Flush mounting or surface mounting for outdoor and indoor application (flush-/surface-mounted house service boxes, plastic house service cabinets, plastic house service boxes, cable transfer boxes) Pole-mounting possible with accessories Free-standing version for installation on a ground-mounted base or floor-mounted base or as a pillar with a press-fitted base Completely assembled and equipped ready for connection

Standardised strip cabinets with a rail system Certified cabinet and enclosure systems, configured with busbar systems and equipped with NH switching devices are used as cable distribution cabinets in accordance with IEC 61439 in public power distribution networks. Weather-resistant plastic cabinets with a high safety factor The totally insulated polyester enclosures are designed for use as cable distribution cabinets. They are ideally suited for use outdoors and protect against the weather, touch and unauthorised access. The enclosures are equipped with busbar systems made of flat copper and fitted with NH built-in devices. Sizes standardised in accordance with DIN 43629 and ÖNORM E 4381 (DIN 00 to DIN 3, ÖNORM F3 to F6) with heights of 850 mm and 1080 mm Constructed specifically to the region concerned, in accordance with the specifications and design guidelines of the power grid operators Qualified and tested in accordance with the requirements of IEC 61439-5 Free-standing installation on a standard base or flush-mounted in the wall Cable distribution system tool for the design of cable distribution cabinets, an online calculation tool from ELSTA Mosdorfer (kvs.elsta.com). Ask your usual contact.

Flexible plastic enclosure system for flush-/surface-mounted installation Totally insulated plastic wall cabinets for metering and distribution cabinets with millimetre precision for flush mounting or wall mounting. Modular double-wall enclosure for indoor and outdoor use, made to measure The thermoplastic enclosures from ELSTA Mosdorfer are constructed from a framework of extruded, double-walled profiles and corner joints, and reinforced with a rear wall. Hinged doors made of plastic or galvanised, powder-coated sheet steel with different locking systems and optional cleaning frames make the modular cabinet system a versatile and functional enclosure solution for energy distribution. Protection class II, protection via double or reinforced insulation Outdoor installation as a flush-mounted variant with a plastic door and a flush-mounted variant with a sheet metal door and plaster frame in protection class IP 43 Indoor installation as a flush-mounted variant with a sheet metal door, and a surface-mounted indoor variant with a plastic or metal door in protection class IP 30D Empty enclosures suitable for development as a switchgear assembly in accordance with IEC 61439 Use as a metering cabinet, main distribution cabinet (fuse distribution cabinet) or installation distributor (field distribution cabinet) Colour RAL 7035 Extensive range of accessories for the installation and expansion

Robust plastic wall cabinets for wall and pole mounting Totally insulated polyester wall cabinets with appropriate protection class for outdoor use. ELSTA Mosdorfer provides the right size from small surface-mounted connection boxes to surface-mounted standard cabinets. Ideally protected surface-mounted distribution enclosure for outdoor use The UV-resistant and weather-resistant polyester surface-mounted distributor enclosures from ELSTA Mosdorfer in different sizes and series have one thing in common – they are the ideal solution for all applications where the distributor enclosure is to be surface-mounted or pole-mounted outdoors, and maximum protection and durability are called for. Protection class II, protection via double or reinforced insulation Protection class IP 44 or IP 54 (optionally in accordance with IEC 61439 or EN 62208) Empty enclosures suitable for development as a switchgear assembly in accordance with IEC 61439 Single-shell small distributor and DIN and ÖNORM sizes for use for example as a surface-mounted cable distribution cabinet Colour RAL 7032 with a smooth surface Extensive range of accessories for the installation and expansion

Robust plastic built-in enclosure for flush mounting Totally insulated polyester flush-mounted cabinet with appropriate protection class for outdoor use. ELSTA Mosdorfer provides the right size, from small flush-mounted connection boxes to flush-mounted standard cabinets. Ideally protected flush-mounted distribution enclosure for outdoor use The UV-resistant and weather-resistant polyester flush-mounted distributor enclosures from ELSTA Mosdorfer in different sizes and series have one thing in common – they are the ideal solution for all applications where the distributor enclosure is to be flush-mounted outdoors (for example in the external wall of a house or in the garden wall), and maximum protection and durability are called for. The door can be painted or plastered after simple pre-treatment, and can thus be adapted to the house facade. Protection class II, protection via double or reinforced insulation Protection class IP 44 or IP 54 (optionally in accordance with IEC 61439 or EN 62208) Empty enclosures suitable for development as a switchgear assembly in accordance with IEC 61439 Single-shell small distributor and DIN and ÖNORM sizes for use for example as a flush-mounted cable distribution cabinet Openings for cable entry are prefabricated Colour RAL 7032 with a smooth surface Extensive range of accessories for the installation and expansion

Energy-distributing outdoor pillars The technically sophisticated pillars will impress you with their compact design and small dimensions. The lower part of the pillar is embedded in the soil as a “base”. The ideal solution for all applications with low space requirements or limited available space. Compact solution for energy distribution outdoors The UV-resistant and weather-resistant pillar enclosures from ELSTA Mosdorfer are the ideal solution for all tasks in which pillar enclosures are sought for outdoor use. Depending on the series, the pillars are configured for example as small distribution pillars for clamping units, house connection pillars or metering cabinets. Well thought-out mounting options inside allow maximum flexibility in the interior fittings. Stationary installation, embedded in the soil; the embedded depth depends on the series. Protection class II, with protection through double or reinforced insulation Protection class IP 44 or IP 54 (optionally in accordance with IEC 61439 or EN 62208) Empty enclosures suitable for development as a switchgear assembly in accordance with IEC 61439 Interior optimised for installation of copper busbar systems, metering cabinet extensions and inner enclosures Colours RAL 7032 or RAL 7035 with a smooth or profiled surface, depending on the series Extensive range of accessories for the installation and expansion

DIN and ÖNORM cabinets and special sizes from hot-pressed, glass fibre reinforced thermoset polyester for installation on a ground-mounted base or a base for floor mounting. Weather-resistant enclosure systems for outdoor use The UV-resistant and weather-resistant standard enclosure system is the ideal solution for all tasks in which enclosures are sought for outdoor use. They are installed on a ground-mounted base or on a base for floor mounting (pavement distributor). Protection class II through double or reinforced insulation Protection class IP 44 or IP 54 (optionally in accordance with IEC 61439 or EN 62208) Empty enclosures suitable for development as a switchgear assembly in accordance with IEC 61439 DIN and ÖNORM sizes for use for example as a standard cable distribution cabinet Countless dimensions and combinations, depending on the series Colours RAL 7032 or RAL 7035 with a smooth or profiled surface, depending on the series Extensive range of accessories for the installation and expansion