DE-61 is the solution for clear heights from a minimum of 330 cm. This design features less columns in the entrance area for higher comfort while entering the system and opening car doors. The system has lifting platforms on the upper level and sliding platforms on the lower level with one empty sp

Are you looking for a parking lift that offers maximum comfort and high efficiency? Then our S2.8 double parking system is the right product for you. Thanks to its horizontal platforms, the double parking system provides convenient entry and exit. Our design also requires minimal installation space,

The V2 parking system was designed to accommodate cars of any height. Its vertical adjustability allows our duplex parking system to be perfectly adapted to your needs. The V2 is ideal for parking garages, residential buildings, and offices. The V2 creates dependent parking spaces: before the platfo

An automatic tower system from KLAUS Multiparking is always the right choice if little floor space is available. Rather than being wide, the tower system is either tall or deep – a lift transports your vehicle to a free parking space, where it is safely parked. With 15 parking levels one above the o

DE-40 is our comfortable and simple solution for Indoor use to double the number of parking spaces. The lower vehicle is directly parked on the ground. Flat platforms as standard equipment for high comfort when entering and walking. The lower vehicle on the ground must be driven out before the pla

The MAX3 parking system makes it possible for 5 to 29 cars to be parked in the car park system. It has three levels on which cars can park one above the other. The cars can be selected flexibly - this allows completely independent parking. Thanks to an empty space, the respective parking spaces are

The MAX1 car parking system is an automatic parking system with horizontally and vertically movable parking spaces. Two cars can be parked on top of each other. However, a pit is required. An empty space allows the selection of each car in the parking system: so the cars can be parked independently

Our PQ parking pallet system will enable you to make efficient use of the garage space by storing the vehicle even in a confined space. In our parking pallet system, the vehicle is parked on metal pallets. These pallets are moved transversely to store and retrieve the vehicle on a click of a button

The Omega KTO-KTS-Series is a compact thermostat designed for temperature regulation and limit monitoring. The series identity centers on small-size, DIN rail-mounted units with high switching performance. Documented applications include regulating heaters using normally closed (NC) configurations a

TORO 25 CLIMA FIBER EvO system consists of three-layer pipes made of a special blend of PP-R EvO, Random Copolymer Plypropylene with special and improved crystalline structure, reinforced with glass fiber, used for the adduction of pressure fluids. It represents a variant of the TORO 25 FIBER EvO sy

TORO 25 FIBER EvO system consists of three-layer pipes made of PP-R EvO, Random Cpolymer Polypropylene with special and improved crystalline structure, reinforced with glass fiber, used for the adduction of pressure fluids. This particular blend is called Fiber Evo: Fiber → glass fiber ; EvO → PP-R

The new generation JBF-M features a more robust structural design and fully meets all latest market design standards and requirements. It is engineered to perform reliably under extreme conditions, including high temperatures, cryogenic environments, and highly abrasive applications—making it the id

Butterfly valves are used in drinking water networks and water supply lines. Suitable for underground and surface installation. A rubber that provides sealing could be replaced without disassembling other parts. It can also be used with reducer and variousactuators. Butterfly valves are used in to r

HDPE Pipes from S&M are manufactured according to ISO, DIN and BS standards from 20mm up to 800mm outside diameter in various Nominal Pressure Classes, Standards Dimensions Ratio and Pipe Series, details of which are shown later in our catalog. S&M HDPE pipes up to DN 125 are produced in 100 meters

The KR Series is the single screw high performance helical extrusion line of Krah, which is a complete plastic pipe production plant, to produce structures wall (acc. DIN16961, etc.) or solid wall pipes (acc. ISO 4427 etc.) on internal diameters from DN 300 mm up to DN 5000 mm made out high density

JBFM Metal-Seat Ball Valve is designed especially for serve services with high temperature, abrasion or corrosion in the industrial processes. With JDV’s self-owned coating technology, a wide range of hard faces are available to satisfy all your using conditions.

To answer the growing demand of reliable and robust metal-seated threaded & welded ball valves, our experienced engineering teams designed the JBSM Series, meeting the requirements of the most challenging industries: Oil & Gas, Refineries, Petrochemical & Chemical Industries, Power Generation, Pulp

HDPE resin that has been certified according to the TIS 2016-2011 standard (PE80 / PE100)

HDPE Granules which has been certified according to the TIS 2016-2011 standard (PE80/PE100)​

FEATURE Standard port, 1/4″~2″ (DN8~DN50) W.P. : 2160 WOG W.T. : -20°C~200°C (-4°F~392°F) Investment casting Blow-out proof stem Anti-static device (option) Locking device ISO 5211 mounting pad Seal welded ends ASME B16.34 Wall thickness NACE MR0175 API 607 Fire safe approved API 608 Design Thread t

In order to satisfy the ever growing needs of high-quality cryogenic valves for a wide range of industries, our skilled engineers, who already possess an extensive experience in critical applications, designed the JBF/JBFM Cryogenic Series. Based on the successful and renowned design of the JBF/JBFM

Full Bore (Full Port) Pressure: 2000CWP (PN130) Temperature: Down to -196°C Pipe thread in accordance with NPT, Rp, Rc, G End to End: DIN3202 M3 length Investment casting body and cap Encapsulated body Long neck design Blow-out proof stem Anti-static design Locking device design Direct mounting pad