Aluminium wires and rods for welding aluminium-magnesium basis alloys with maximum 5% Mg. Zirconium acts as grain-refiner to improve both the bending and the corrosion resistance. Applications in the construction of ships, off-shore, storage tanks, railways and automotive industry. Downloa

Aluminum wires and rods for semi-automatic MIG and TIG welding using argon, helium, or Ar + H1 gas shielding. These wires contain approximately 5% Mg, a high Mn content, and a micro-alloy of Zr. Designed for welding AlMg and AlMgSi alloys, the weld metal is characterized by high strength, resistance

Aluminum wires and rods containing 5% Mg for semi-automatic MIG and TIG welding using argon, helium, or Ar + H1 gas. Designed for welding AlMg and AlMgSi alloys. The weld metal is seawater-resistant. After anodizing, it produces a color similar to the parent material.

Aluminium wires and rods for welding alloys with mostly pure aluminium basis (maximum 0,5% of alloyed elements). Applications in chemistry, electronics, construction and food industries.

Alloy 4008 is produced with controlled lower levels of impurities than those present in alloys 4010 and 356.0, A356.0 and A357.0. It is a product that meets the chemistry requirements of AMS4181. Alloys 356.0, A356.0 and A357.0 are typically used to manufacture sand and permanent mold castings. Allo

2594 is used for welding of 2507 and other super-duplex steels. The grade is characterized by excellent resistance to stress corrosion in chloride-bearing environments and excellent resistance to pitting and crevice corrosion. 2594 can also be used for welding 2205 and corresponding duplex steels wh

OK Autrod 347 is suitable for joining stainless steels of the 18Cr/8Ni/Nb and 18Cr/8Ni/Ti types. Due to the strenghtening effect of niobium, this grade is recommended if the weld metal will be exposed to temperatures above 400°C (750°F). It is used for joining and overlay welding with MIG/MAG, plasm

Wires and rods for semi-automatic welding and surfacing using a mixed gas shielding agent (MAG) and argon-arc (TIG). This produces an austenitic -ferritic weld metal with high resistance to hot cracking. It is primarily intended for joining dissimilar stainless steels, e.g., with unalloyed (low- and

A continous solid corrosion resisting Duplex wire for welding of austenitic-ferritic stainless alloys of 22% Cr, 5% Ni, 3% Mo types. OK Autrod 2209 has a high general corrosion resistance. In media containing chloride and hydrogen sulphide the alloy has a high resistance to intergranular, pitting an

2209 is used for welding of duplex stainless steels such as 2205 and 2304. It can also be used for welding of duplex stainless steels to carbon steel. It is used for MIG/MAG welding.

Wires and rods for semi-automatic welding and surfacing using a mixed gas shielding agent (MAG) and argon-arc (TIG). Designed primarily for welding low-carbon, acid-resistant, austenitic CrNiMo steels, as well as for welding Nb- or Ti-stabilized steels. Resistant to intergranular corrosion and corro

Copper-plated electrode wire with Cr = 1.25% and Mo = 0.5% for semi-automatic welding using C1 (CO2) or M21 (Ar + CO2) shielding gases. The wire's metallurgical properties ensure high-quality welds and reliable wire feeding in mechanized welding. Welded joints can operate at temperatures up to 500°C

A Nickel Aluminium Bronze wire for use in welding of Nickel aluminium bronze (Cu Ni Al) components and fittings of similar composition. This weld metal alloy has excellent corrosion and wear resistance characteristics, which promote applications in marine, power and chemical plant components e.g. sh

The alloy SF-CuAl8 has been developed for welding copper alloys and for coatings on steel, steel castings, nickel alloys and for fixing works in artistic foundries. Excellent for metal spraying. This material offers a very high resistance to seawater-corrosion and to the most commonly used acids in

This alloy is used for inert gas arc welding of metals with copper basis, as, for example, copper-silicium, copper-zinc and galvanized sheets, also connected to steel. This material is frequently used for fixing in artistic foundries. For welding galvanized sheets and even as coating of steel using

Copper-plated electrode wire with a 2.50% Ni content for semi-automatic welding using C1 (CO2) or M21 (Ar + CO2) shielding gases. The wire's metallurgical properties ensure high-quality welds and reliable wire feeding in mechanized welding. IMT G2Ni2 is designed for single- and multi-pass joints of

Copper-plated electrode wire with a 0.50% Mo content. The wire's metallurgical properties ensure high-quality welds and reliable wire feeding. Welded joints can operate at temperatures up to 500°C. IMT 6 is designed for welding structural, boiler, shipbuilding, and general-purpose, high-strength C-M

Seamless, copper-plated, metal-core flux-cored wire designed for single- or multi-pass welding. Innovative production technology ensures low hydrogen content (HD < 5 ml / 100 g), ensuring excellent mechanical properties at temperatures as low as -40°C. IMT M CORTEN wire is used for welding Corten-ty

An innovative/evolutionary seamless flux-cored wire based on cutting-edge production technologies, enabling unprecedented welding properties in terms of arc stability, weld appearance, and mechanical properties. Ideal and consistent wire feedability, raw material purity, stable geometry, and lubrica

Seamless, copper-plated, flux-cored wire with a metal core, designed for single- or multi-pass welding. Innovative production technology ensures low hydrogen content (HD < 5 ml / 100 g), ensuring excellent mechanical properties at temperatures as low as -60°C. IMT M700 wire is used in offshore const

A seamless, copper-plated, rutile-cored flux-cored wire designed for single- or multi-pass welding. Innovative production technology ensures low hydrogen content (HD < 5 ml / 100 g), ensuring excellent mechanical properties at temperatures as low as -60°C. IMT R811 wire is used in offshore construct

A seamless, copper-plated, rutile-cored flux-cored wire designed for single- or multi-pass welding. Innovative production technology ensures low hydrogen content (HD < 5 ml / 100 g), ensuring excellent mechanical properties at temperatures as low as -40°C. IMT R711Ni wire is used in offshore constru