Viking®

Micro-fleece lined collar for greater comfort Dual reflective chest straps Ribbed wrist cuffs 2 front slash pockets, one clear ID Pouch

2″ Vi-brance® reflective safety material in 4″ contrasting tape meets WCB/Worksafe/DOT configuration Dual layer construction of a cotton back and an outer polyester layer provide superior comfort and breathability while decreasing irritation Dual reflective chest straps Pocket with hook-and-loop fastener on left side of chest UPF (Ultraviolet Protection Factor) rating of 50+ blocks 98% of UV radiation from passing through the shirt

High abrasion, snagging industries due to superior tear resistance of 1000 denier fibers. Ideal for forestry, lumber yard, and construction 2″ Vi-brance® reflective tape in 4″ contrasting tape meets WCB/Worksafe/DOT configuration Made from heavy-duty 1000 denier polyester fabric to withstand damages caused by rips, punctures and snags in industrial use Double stitched tape and background for superior durability Heavy-duty front tooth zipper closure 4 Large storage pockets with hook-and-loop fasteners, and 4 inside pockets Cell/radio pouch pocket 11″ zippered pack across entire back area Back pouch with hook-and-loop fastener Dual reflective chest straps

This garment is not intended as protection from Hydrocarbon Flash Fires, Electric Arc Hazards, or welding sparks 0.35mm FR-treated PVC/polyester/PVC material 2″ Yellow prism reflective tape Generous sizing for comfort and freedom of movement Micro welded seams for durability and waterproofness 100% Waterproof and windproof ESR nylon snap closure systems Sold as a 3-piece suit Jacket Cotton corduroy collar for comfort Detachable hood included Adjustable wrist cuffs Underarm vents for breathability Bib Pants Bib pants with adjustable waist panel and ESR suspenders Adjustable boot cuffs

100% Waterproof Chloroprene blended upper with cotton canvas lining Self-cleaning mini-lug sole for superior slip-resistance Unique chemical resilient SBR rubber/cotton lined – resistant to: Oil, petroleum products, abrasion, and heat (300 degrees C) High chemical exposure protection 30% Sodium Cyanide (>480 min.) 50% Sulfuric Acid (240 Min.) Cement and Potash 48% hydrofluoric Acid (>480 min.) CSA Z195-14/ASTM F3413-24 Grade 1 steel toe and plate CSA Omega 18kV electric shock resistant CSA Metatarsal protection ASTM Mt Metatarsal protectionMeets the test requirements of the following standards ASTM F3445-21 SR Heel Quarry Tile Wet 0.49 Forepart Quarry Tile Wet 0.48 Slip Resistance CAN/CGSB-155.20-2000 TPP with Spacer 58.0 cal/cm² TPP without Spacer 58.8 cal/cm² NFPA 1990-2022(1992) PROTECTIVE ENSEMBLES FOR HAZARDOUS MATERIALS AND CBRN OPERATIONS CE EN 50321: 2018 Class 0 (5kV Wet Dielectric Test) (For nominal use 1kV)

14″ and adjustable Comfortable polyester quick dry design 2″ tape CSA Z96-22, ANSI/ISEA 107-2020 ankle and wrist bands in 4″ wide configuration Can be worn for high visibility in combination with safety jackets, vests and T-shirts to meet Class 2 or Class 3 CSA standards Phosphorescent materials used on Vibrance NT® tape is ‘glow -in-the-dark’ that can ‘store energy when exposed to light and continue to glow even after light source is removed

CSA Z195-14 Grade 1 steel toe cap Foamed PU waterproof construction Long-lasting, tough-wearing PU remains flexible at -20°C / -4°F Enhanced comfort: wider fitting Anti-bacterial and abrasion-resistant lining Kick-off spur for quick removal Anti-clogging sole for added slip resistance Shock-absorbent heel Cut-off line to make shorter boot from 15″ to 11.5″ Lightweight, comfortable, and flexible Resistant to mineral, manure, vegetable and animal oil or fats, blood and various chemical cleaning products 1 pair in a poly bag, 5 pairs per carton

CSA Z195-14/ ASTM F3413-24 Grade 1 Steel toe and plate CSA Omega – Electric Shock Resistant 18kV Chainsaw Protection (Mid Class: 24 m/sec chainsaw speed as per EN ISO #17249:2013) EN ISO 20345:2011 SB PE HRO FO SRA SBR blended NR upper with cotton canvas lining Highly chemical-resistant rubber upper Circular saw cut resistance 15″ in height, 3″ nylon cuff with adjustable toggle to keep debris out Only 3% of degradation after immersed in cement for 70 hours Reinforced Achilles protection Kick-off spur Abrasion-, oil-, chemical-, heat-, and slip-resistant, and air-cushioned NBR lug sole 30% concentration Sodium Cyanide resistant >480 minutes Protection against slipping into rebar; preventing bruising, lacerating of the shin/ankle Slip-resistant soles resistant to 300˚C/572˚F hot contact Snug-fit design to reduce foot fatigue and ankle rollover Ultra flexible: Exceeds 305,000 Flex Rating Compatible with ice studs

CSA Z195-14 / ASTM F3413-24 Grade 1 steel toe only CSA Omega – Electric shock-resistant 18kV EN ISO 20345:2022 Individually tested, withstanding voltage up to 10 kV in wet condition, and 18 kV in dry condition Dielectric boots contain 200 Joule Epoxy coated steel toe SBR blended NR upper with polyester lining Highly chemical-resistant rubber upper Extra shin protection Cut-off line to make boot shorter Abrasion-, chemical-, oil-, heat- and slip-resistant, and air-cushioned vulcanized NBR lug sole for inimical environment Resistance to hot contact 300˚C/527˚F for 60 seconds Ultra flexible: Exceeds 305,000 Flex Rating Packaged individually

Meets CGSB 155.20 Hydrocarbon Flash Fire Protection; Thermal Protective Protection (TPP) with the spacer 58 cal/cm² and TPP without spacer 58.8 cal/cm² CSA Z195-14 / ASTM F3413-24 Grade 1 Steel toe and plate CSA M / ASTM Mt/75 Metatarsal protection CSA Omega – Electric Shock Resistant 18kV NBR blended NR upper with polyester lining Highly chemical-resistant rubber upper Reinforced heel and instep Self-cleaning NBR lug sole Fire retardant upper provides flame and thermal protection Abrasion-, oil-, chemical-, slip-, and heat-resistant chloroprene lug sole Sole resistant to 300˚C/572˚F hot contact Ultra flexible: Exceeds 305,000 Flex Rating Compatible with ice studs

CSA Z195-14 / ASTM F3413-24 Grade 1 Steel toe and plate CSA Omega – Electric Shock Resistant 18kV ASTM Mt/75 Metatarsal protection European Standard CE Approved – EN ISO 20345:2022 High chemical and abrasion resistance NBR rubber for maximum chemical protection Oil-, chemical-, and slip-resistant NBR sole Reinforced backstay for heel/tendon protection Steel shank and air-cushioned sole pockets Adjustable nylon guard keeps out water and debris AMC socks (VF22) included Air moisture control socket for comfort Heavy-duty cotton canvas lining Ultra flexible: Exceeds 305,000 Flex Rating

CSA Z195-14 ‘Green Fir Tree’ chainsaw protection – Chainsaw Cut Protection Class 3 (28m/sec chainsaw speed as per EN ISO 17249:2013) CSA Z195-14 / ASTM F3413-24 Grade 1 steel toe and plate SBR blended NR upper with cotton canvas lining High impact, abrasion-, chemical-, and oil-resistant NBR lug sole Highly chemical-resistant rubber upper Achilles tendon, ankle protection Rubber lace collar with safety reflective stripe Ultra flexible: Exceeds 305,000 Flex Rating NBR caulked sole spiked sole having limited chemical resistance

CSA M / ASTM Mt/75 Metatarsal protection CSA Z195-14 / ASTM F3413-24 Grade 1 Steel toe and plate CSA Omega – Electric shock resistant 18kV European Standard CE Approved – EN ISO 20345:2022 Australia New Zealand Standard Approved – AS/NZS 2210.3.2009 SBR blended NR upper with cotton canvas lining Highly chemical resistant rubber upper Oil-, chemical-, abrasion-, heat-, slip-resistant, and air cushioned NBR lug sole 30% concentration Sodium Cyanide resistant >480 minutes Achilles tendon and ankle protection Compatitble with ice studs Ultra flexible: Exceeds 305,000 Flex Rating 16″ Tall

NFPA : 1970 – 2025 protective footwear for structural fire fighting NFPA : 1990 – 2022 liquid splash-protective against hazardous material emergencies CSA Z195-14 / ASTM F3413-24 Grade 1 Steel toe and plate CSA Z195-14 “Green Fir Tree” chainsaw protection – Chainsaw Protection (Highest Class 3 (28m/sec chainsaw speed as per EN ISO 17249:2013) CSA Omega – Electric shock resistant 18kV Extra comfort non-woven para/meta-aramid FR lining excellent flame resistant property 16″ tall Snug-fit design and ergonomic insole, plus the optional felt insole to adjust fit Highly chemical resistant rubber upper Flame retardant rubber upper Reinforced backstay for heel tendon protection Metatarsal, shin impact, and chainsaw protection through multiple layers of polyaramide, and rubber Shaft is also lined with polyaramide for protection Ankle padding protection and foam midleg padding for additional support Viking NJV outsole – abrasion-, chemical- and slip-resistant chloroprene rubber outsole Ultra flexible: Exceeds 305,000 Flex Rating Safety reflective patch on the back of the boot Heavy-duty rubber pull straps Half sizes available

NFPA : 1970 – 2025 protective footwear for structural fire fighting CSA Z195-14 / ASTM F3413-24 Grade 1 Steel toe and plate CSA Omega – Electric shock resistant 18kV Chemical resistant tested as per EN 13832-1:2006 14″ tall Snug Fit design and ergonomic orthotic insole Flame retardant rubber upper with grey felt lining Highly chemical-resistant rubber upper Vamp and leg lined with felt lining material for comfort and thermal insulation Reinforced backstay for heel/tendon protection Steel midsole for footstep protection against penetration External rubber shin guard adds protection and comfort while working on ladders Abrasion-, oil-, chemical-, slip-resistant, and heat-retardant chloroprene rubber lug sole Safety reflective patch on the side of the boot Heavy-duty rubber pull straps Ultra flexible: Exceeds 305,000 Flex Rating Compatible with ice studs

Meets EN388 standard Nitrile dipped palm on seamless Polyester knit Contour-fit for excellent dexterity and gripping power Flexible, comfortable, and breathable In bulk only, 120 pairs per case

2″ Vi-brance® reflective material in 4″ contrasting tape meets WCB/Worksafe/DOT configuration 280 gsm ThermoMAXX® insulation provides warmth up to -50°C/-60°F 270 gsm (8 oz/yd²) 65/35 poly/cotton fabric provides superior abrasion and tear resistance Extra strong front YKK® #8 zipper Anti-Puncture Pocket (APP) technology with reinforced stitching to prevent sharp objects from puncturing through Fully hemstitched seams eliminate unravelling Gusseted crotch for added mobility and maximum comfort 2 Front upper pockets, 2 lower front pockets, and 2 large back pockets with reinforced bar tacked corners Tool pocket on right leg with hammer loop Silver reflective suspender with quick release buckle Heavy-duty 18″ YKK® #8 boot zipper for venting, and easy access, with 7″ internal kick panel Ultraviolet Protection Factor 50+ Rating (UPF)

2″ Vi-brance® reflective material in 4″ contrasting tape meets WCB/Worksafe/DOT configuration 280 gsm ThermoMAXX® insulation provides warmth up to -50°C/-60°F 270 gsm (8 oz/yd²) 65/35 poly/cotton fabric provides superior abrasion and tear resistance Insulated detachable hood Fully hemstitched seams eliminate unravelling Constructed with a two-way YKK® #8 front zipper and exterior storm flap closure Dual reflective chest straps 2 Front upper pockets, 2 large lower front pockets, and 1 inner chest pocket Left sleeve pencil pocket Ultraviolet Protection Factor 50+ Rating (UPF)

Compliant with CSA Z96-22 Class 2 Level 1 Detachable bib design Heavy-duty adjustable elastic suspenders with quick release buckle Elasticized waist Zippered fly access with hook-and-loop flaps Fully lined for comfort 13″ Boot zipper featuring flap closure and adjustable cuff with hook-and-loop fastener for venting and easy access

Compliant with CSA Z96-22 Class 2 Level 1 Resistant to abrasion, puncture, rips, and snags Flexible in sub-zero conditions Multiple vents, and full mesh lining 2 front pockets, and 1 chest cell pocket Fleece-lined collar for comfort Detachable and adjustable lined hood