The Conhisa meter bank is manufactured from Random Copolymer Polypropylene (PP-RCT) , a state-of-the-art material that ensures a safer, lighter, and longer-lasting installation. Available in diameters of 63, 75, and 90 mm , it strictly complies with UNE 53943 , as well as UNE ISO 15874 , UNE 19804 ,

The Conhisa meter bank is manufactured from Random Copolymer Polypropylene (PP-RCT) , a state-of-the-art material that ensures a safer, lighter, and longer-lasting installation. Available in diameters of 63, 75, and 90 mm , it strictly complies with UNE 53943 , as well as UNE ISO 15874 , UNE 19804 ,

The Conhisa meter bank is manufactured from Random Copolymer Polypropylene (PP-RCT) , a state-of-the-art material that ensures a safer, lighter, and longer-lasting installation. Available in diameters of 63, 75, and 90 mm , it strictly complies with UNE 53943 , as well as UNE ISO 15874 , UNE 19804 ,

Our PREMIUM polypropylene water meter battery is superior to conventional ones. It is weld-free, rust-free, and complies with UNE 53943:2017. One-piece PPR tube , with built-in plastic plate, without welding. Polypropylene pipe circuit according to UNE-EN ISO 15874-1:2004 and UNE-EN ISO 15874-2:2004

Our PREMIUM polypropylene water meter battery is superior to conventional ones. It is weld-free, rust-free, and complies with UNE 53943:2017. One-piece PPR tube , with built-in plastic plate, without welding. Polypropylene pipe circuit according to UNE-EN ISO 15874-1:2004 and UNE-EN ISO 15874-2:200

Automatic angle inlet valve for installations with polyethylene piping, designed for DN 13, 15 and 20 mm meters. Features an anti-fraud system, low pressure loss, and ACS sanitary certification for drinking water.

Automatic inlet valve for water meters with anti-fraud system, ACS sanitary certification, and minimal pressure loss. Designed for individual meter banks and connections, compatible with DN13, DN15, and DN20.

Automatic linear threaded valve with swivel nut for water meters DN 13, 15 and 20 mm. Designed for meter banks and individual connections, it offers minimal pressure loss, maximum watertightness and anti-fraud protection, complying with UNE and ACS sanitary regulations.

Italsan manufactures the widest and most complete range of polypropylene batteries for divisional meters, for both new construction and renovation. More than 149,000 units manufactured in accordance with the UNE 53943 standard in PP-R, providing a long service life in continuous use. Authorized by

Monotubular truncated pyramidal towers with polygonal cross-section for high-voltage overhead power lines, manufactured under ISO9001 certified quality control and by an authorized transformation center according to Ministerial Decree 14/01/08, consisting of multiple sections with forced overlapping

Bonney Forge valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, and spiral wound gasket, made in F316L/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and sealed welded joint. O

Bonney Forge cryogenic valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded join

Bonney Forge forged steel integral flange valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded

Bonney Forge is a leading gate valves manufacturer which are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a t

• It is manufactured vertically or horizontally according to model. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • Our tanks use special high strength, fine grained, normalized "P" series pressure vessel steel in accordance with EN 10028-3. T

• It is manufactured as overground or underground storage tanks according to the model. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • Our tanks use special high strength, fine grained, normalized "P" series pressure vessel steel in accordanc

• According to the model it is manufactured as aboveground or underground storage tanks. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • Our tanks use special high strength, fine grained, normalized "P" series pressure vessel steel in accordan

Copper-plated electrode wire with Cr = 1.25% and Mo = 0.5% for semi-automatic welding using C1 (CO2) or M21 (Ar + CO2) shielding gases. The wire's metallurgical properties ensure high-quality welds and reliable wire feeding in mechanized welding. Welded joints can operate at temperatures up to 500°C

The Concept-HL jacking pipe type MRS 2.0 is a wastewater jacking pipe made of filler-free polypropylene according to DIN EN 1852-1 with a material-bonded multi-grid welded joint and short welding time, without an internal weld bead. Fixing the pipes during the cooling phase is not required. The Con

Copper-plated electrode wire with a 0.50% Mo content. The wire's metallurgical properties ensure high-quality welds and reliable wire feeding. Welded joints can operate at temperatures up to 500°C. IMT 6 is designed for welding structural, boiler, shipbuilding, and general-purpose, high-strength C-M

• Itz is manufactured as aboveground or underground storage tanks according to the model. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • In our tanks, carbon steel conforming to EN 10025 norms is used. • Manufacturing and quality processes ar

The tank is designed with a cylindrical section to form the most durable and lightest tank - chassis combination. • Our designs include qualified braking and overturning stability performance tests. • In our tanks, carbon steel conforming to EN 10025 norms is used. • Manufacturing and quality proce

Manufactured in PP according to UNE EN 13476 Type SN8 standard . Available in 6m tubes . Female heat-welded joint and gasket for the male end.

Superior Weld Strength – Our advanced welding process ensures high-quality joints with enhanced durability, suitable for demanding applications. Consistent Quality – Automated production and real-time monitoring ensure uniformity across all pipes, reducing defects and inconsistencies. High-Speed Pro

With a design life of up to 100 years and the majority of the structural strength built into the pipe, reinforced concrete pipe is the most commonly used drainage pipe material. Round drainage pipe is the most readily available and cost efficient of the various shapes of reinforced concrete pipe.