Yılteks Enerji

• It is manufactured vertically or horizontally according to model. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • Our tanks use special high strength, fine grained, normalized "P" series pressure vessel steel in accordance with EN 10028-3. The mechanical and metallurgical properties of the steel are tested and verified. • An elliptical dished head end is used in tank heads with stress relieving according to standards. • Manufacturing and quality processes are carried out under the supervision of an independent inspection body, in accordance with standards and procedures, by a qualified, experienced engineer. • Welding is done by certified welders in accordance with standards and materials. • Certified NDT personnel with competence and international competence in testing and controlling all welded joints. • Once installed, all tanks are subjected to a hydrostatic pressure test. • Outer surfaces of tank are sandblasted with SA quality before painting • Provide the best product to the customers by using corrosion resistant, long lasting, high quality two component paint products of paint companies which have proven internationally for dyeing.

The tank is designed with a cylindrical section to form the most durable and lightest tank - chassis combination. • Our designs include qualified braking and overturning stability performance tests. • In our tanks, carbon steel conforming to EN 10025 norms is used. • Manufacturing and quality processes are carried out under the supervision of an independent inspection body, in accordance with standards and procedures, by a qualified, experienced engineer. • Welding is done by certified welders in accordance with standards and materials. • Certified NDT personnel with competence and international competence in testing and controlling all welded joints. • The inside of the tank is equipped with breakwater and ring with bolt connection according to the standards. • Once installed, all tanks are subjected to a hydrostatic pressure test. After this test, the connections of the tank accessories are tested with air against leaks. • The chassis is manufactured in accordance with the 2007/46 / EC directive and a certificate of conformity is issued. • The chassis is delivered with the cold mark and identification plate approved. • Chassis Made of high-strength steel to withstand all kinds of road and load conditions. • Park stands are offered with dual-speed trailer type models each with 25 tons dynamic and 50 tons static load capacity and different brand options. • Axles With different axle and suspension options; - From one to four axles - Single or double tires - Mechanical or air suspension options available. • The brake system is provided with EBS, ABS or RSP system. • Warning, warning, suspension, brake, etc. Systems consist of approved materials in accordance with ADR. • Outer surfaces of the tank are sandblasted at SA quality 2.5 before painting. • The best product is offered to the customers by using the latest technology '' OVEN PAINT '' method by using dyeing products which have proven international quality for dyeing, corrosion resistant, long lasting, high quality two component paint products.

• Itz is manufactured as aboveground or underground storage tanks according to the model. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • In our tanks, carbon steel conforming to EN 10025 norms is used. • Manufacturing and quality processes are carried out under the supervision of an independent inspection body, in accordance with standards and procedures, by a qualified, experienced engineer. • Welding is done by certified welders in accordance with standards and materials. • Certified NDT personnel with competence and international competence in testing and controlling all welded joints. • Once installed, all tanks are subjected to a hydrostatic pressure test. • Outer surfaces of tank are sandblasted with SA 2.5 quality before painting • Provide the best product to the customers by using corrosion resistant, long lasting, high quality two component paint products of paint companies which have proven internationally for dyeing.

• It is manufactured as overground or underground storage tanks according to the model. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • Our tanks use special high strength, fine grained, normalized "P" series pressure vessel steel in accordance with EN 10028-3. The mechanical and metallurgical properties of the steel are tested and verified. • An elliptical dished head end is used in tank heads with stress relieving according to standards. • Manufacturing and quality processes are carried out under the supervision of an independent inspection body, in accordance with standards and procedures, by a qualified, experienced engineer. • Welding is done by certified welders in accordance with standards and materials. • Certified NDT personnel with competence and international competence in testing and controlling all welded joints. • Once installed, all tanks are subjected to a hydrostatic pressure test. • Outer surfaces of tank are sandblasted with SA quality before painting • Provide the best product to the customers by using corrosion resistant, long lasting, high quality two component paint products of paint companies which have proven internationally for dyeing.

• Tanks are designed and manufactured to meet all the requirements for safe, easy to use and economical operation for all types and applications. • Tanks can be designed at standard working pressures and at different working pressures according to customer request. • Transport tanks are manufactured in accordance with EC directive, EN standards and ADR. All models are presented as π branded customers. It is also designed according to other national standard and customer requirements. • Storage Tanks The EC directive is manufactured according to EN standards. It is designed according to other national standards or customer requirements. • Transport tanks include qualified braking and tipping stability performance tests. • The center of gravity of the transport tanks is reduced to ensure excellent stability and strengthened grip. • Storage tanks support feet are calculated according to Eurocode standards for high wind and earthquake loads. • Installation costs are minimized by properly designed and placed lifting gates in storage tanks. • Stainless steel in EN 10028-7 standard and carbon steel in EN 10025 standard are used in the inner tank. • Tanks are equipped with sturdy internal supports against tensions and loads during transport. • Steel pipes, stainless steel pipes, valves and equipments, which are provided by companies with world leaders in their fields, constitute safe and durable products. • Potential leakage risk is reduced to the minimum with the most suitable bends in stainless steel pipe work, ensuring that the system delivers high performance throughout the run time. • Valve outlets, lifting posts, other accessories on the tank are ergonomically designed with safety, ease of use, maintenance and ease of operation in mind. • Storage tanks are equipped with a recovery cycle, so that the boiled gas is directed to the main system to prevent waste of gas. • Pressure adjustments in storage tanks are very easy with the mono-block pressure economizer-regulator and the system is extremely safe. • Tanks and equipment are cleaned with oxygen.

• Tank Capacity: between 0,5 m3 and 300 m3 • Tank Code: CrV • Operating Pressure: 5 bar • Operating Temperature: - 196 ‘C • Design Standard: EN 13458, PED or other standards • Insulation: Pearlite & vacuum

• According to the model it is manufactured as aboveground or underground storage tanks. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • Our tanks use special high strength, fine grained, normalized "P" series pressure vessel steel in accordance with EN 10028-3. The mechanical and metallurgical properties of the steel are tested and verified. • An elliptical dished head end is used in tank heads with stress relieving according to standards. • Manufacturing and quality processes are carried out under the supervision of an independent inspection body, in accordance with standards and procedures, by a qualified, experienced engineer. • Welding is done by certified welders in accordance with standards and materials. • Certified NDT personnel with competence and international competence in testing and controlling all welded joints. • Once installed, all tanks are subjected to a hydrostatic pressure test. • Outer surfaces of tank are sandblasted with SA 2.5 quality before painting • Provide the best product to the customers by using corrosion resistant, long lasting, high quality two component paint products of paint companies which have proven internationally for dyeing.