EFS Multi-Blade fire damper is rated as a 3 hours fire damper for use in dynamic systems, per SI 1001 part 3 (UL 555). As a life safety fire damper, it has a failsafe design which enables the damper to automatically close upon the detection of heat and/or loss of power. The electric heat respons

EFS Multi-Blade fire damper is rated as a 3 hours fire damper for use in static systems, per SI 1001 part 3 (UL 555). As a life safety fire damper, it has a failsafe design which enables the damper to automatically close upon the detection of heat and/or loss of power. The electric heat responsi

EFS Multi-Blade fire damper is rated as a 1-1/2 hour fire damper for use in static systems, per SI 1001 part 3 (UL 555). As a life safety fire damper, it has a failsafe design which enables the damper to automatically close upon the detection of heat and/or loss of power. The electric heat respo

3 hour temperature rise doors tested to NFPA 252/UL10B/UL10C. Available with vision lites up to 100 sq. inches. See more information below!

AMP fire rated doors offer exceptional protection from fire. They are constructed with high technology fireproof materials and they bear CE EN 1634-1 certification. Our fire rated cold storage and freezer door has also been evaluated by Intertek according to the requirements of the standards UL 10C

EFS-FC fire curtain consists of a control box, rollers, motors, fabric, bottom rod, side guides and electronic components. The curtains are installed in a unique, hidden and aesthetic method that assimilates them as an integral part of the building’s ceiling or wall so that it does not visually detr

Has a PFAS (Total Fluorine) concentration of no more than 100 ppm Tested against NFPA 1970 Section 8.21/9.10.1 Test Program and compliance to the restricted substance requirement

Structural fire fighting General fire rescue Bush fire fighting

Fire Pump Group Control System Individual control panels are used for electric pump, diesel pump and jockey pump Lock mechanism are used on panels Continuous grounding Pumps can run by manual control and emergency-run mechanical control on controller By the help of Locked Rotor Protection (LRP), i

60-90 minute fire rated doors with temperature-rise tested to NFPA 252/UL 10B/UL 10C up to 10 ft. tall. Available with full-vision glazing, standard and narrow profiles, multiple hardware options and finishes including custom aluminum clad or stainless steel clad. See below for more information!

20-45 minute fire rated doors tested to NFPA 252/UL 10B/UL 10C up to 10 ft. tall. Available with full-vision glazing, standard and narrow profiles, multiple hardware options and finishes including custom aluminum clad and stainless steel clad. See below for more information!

AMI-SIL® AS and CAS hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). The following AMI-SIL AS and CAS hot work fabrics have been tested and rated to the ANSI/FM 4950 Standard which is now required by the NFPA 51B. AS1800G & AS3600 meet USCG1

Single and Double-Wall Pressure Industrial Chimney for Heating Appliances, Boiler Breeching, Generator and Fume Exhaust and other applications as defined by standard NFPA 211.

Single and Double-Wall Positive Pressure Special Gas Vent engineered for venting today’s high efficiency natural gas-burning or propane fired appliances, categories II, III and IV as defined by the Standard for Gas-Fired Central Furnaces, ANSI Z21.47 and NFPA 54.

Meet or Exceed the Requirements of NFPA 24 Standard. Indicates the State of the Valve OPEN or SHUT Position. Target Nut to allow 13 to 45 Turns. Protected Windows. Telescoping Operating Rod. Easily Adjustable Indicator OPEN and SHUT Targets. Spray Painted Interior and Exterior meet or exceed all app

Dry Pipe Valves for use as an automatic means of controlling water flow to automatic dry-pipe sprinkler systems. Vertical orientation. Peroxide cured EPDM with Fabric Diaphragm. NFPA 13 Standard. Latched Clapper Type. Air Supervisory Pressure Switches included. Rated Working Pressure 5 – 300 psi. CE

Our welded tanks comply with various of industry standards including AWWA D-100 and NFPA-22 and are well suited for storage of potable water, wastewater, irrigation water and water for fire protection. For applications involving storage of crude oil, petrochemicals and liquid fertilizer our welded t

Bronze Fire Hydrant designed for use on Offshore Platforms. Manufactured of ASTM B62 C83600 Bronze Alloy for Superior Corrosion Resistance. Two 2.5” Hose Nozzles, with NFPA Standard 1963 Hose Nozzle Threads. UL Listed / FM Approved. Meets AWWA C503 Standard. Available with 4 Inch Monitor Flange outl

AMI-GUARD® is AMI’s line of high performance finished hot work products. AMI-GUARD® welding curtains are sewn with PTFE-coated fiberglass thread, FM Approved, and meet the requirements of NFPA 51B. All AMI-GUARD® fabricated welding curtains are available in standard or custom sizes and with or witho

The Safeprotex Acrylic-Coated Fiberglass Welding Blanket is constructed from acrylic fiberglass-coated fabric, offering a working temperature range of -18°C to 149°C (0°F to 300°F). The acrylic coating enhances abrasion resistance, mechanical strength, and anti-aging properties, making welding blank

Safeprotex Silicone-coated fiberglass fire blanket is an economical solution specifically designed to control electric vehicle (EV) fires in short-duration emergencies. With a continuous temperature resistance of 550°C (1022°F), the silicone coating enhances silicone coated fire blanket’s performanc

Full Shotgun Riser Check Valve assembly. Includes UL / FM Grooved End Check Valve, Angle Drain Valve, UL / FM Pressure Gauges, Plugs, Pipe Nipples. Vertical or Horizontal Installations per NFPA Standards

NFPA : 1970 – 2025 protective footwear for structural fire fighting CSA Z195-14 / ASTM F3413-24 Grade 1 Steel toe and plate CSA Omega – Electric shock resistant 18kV Chemical resistant tested as per EN 13832-1:2006 14″ tall Snug Fit design and ergonomic orthotic insole Flame retardant rubber upper w

Our Fire Protection tanks are designed according to NFPA-22/ AWWA D103 specifications. These tanks support fire suppression systems and have been installed successfully in hundreds of locations throughout California, Nevada, Arizona, and the Pacific Northwest.