Hex head cap screws are manufactured with tighter tolerances than hex bolts and include a washer face under the head. The tighter tolerances allow a cap screw to be used in tapped hole applications, like those used in heavy equipment, or with a nut. They are available in Imperial and Metric specif

Introducing Easyflex FIP Thread isolation valve kits that consist of one hot and one cold water valve made of lead-free brass, along with an optional pressure relief valve. To cover a wide range of applications, we offer connection sizes in 3/4″ and 1″. All of our valves comply with NSF 372 regulati

To answer the growing demand of reliable and robust metal-seated threaded & welded ball valves, our experienced engineering teams designed the JBSM Series, meeting the requirements of the most challenging industries: Oil & Gas, Refineries, Petrochemical & Chemical Industries, Power Generation, Pulp

Full Bore (Full Port) Pressure: 2000CWP (PN130) Temperature: Down to -196°C Pipe thread in accordance with NPT, Rp, Rc, G End to End: DIN3202 M3 length Investment casting body and cap Encapsulated body Long neck design Blow-out proof stem Anti-static design Locking device design Direct mounting pad

OCTAVE – Revolutionary, precise and super reliable ultrasonic bulk water meter. With superior hydraulic and batteries that last up to 15 years, the Octave is today’s best choice for bulk meters. The version with stainless steel body is especially suited for aggressive water in industrial processes

The Series S85 Threaded Ball Valve complies with various standards and certifications, including ISO 5211, NACE MR0175, NSF-61/372, ASME B16.34, MSS-SP-72, MSS-SP-110, PED, PE(S)R, CRN, and SIL.

Threaded ball valves S40 series.

A non-adhesive plumbers PTFE tape, suitable a use with thread fittings. Features & Benefits:- Tape density 0.4g/cm³. - Conforms to BS6920. - EN751-3 Approved. - BS7786 1995 Grade. Uses: For thread sealing of plumbing pipe work. Suitable for use with plastic, brass and other metal fittings/ pipes.

Automatic angle inlet valve for installations with polyethylene piping, designed for DN 13, 15 and 20 mm meters. Features an anti-fraud system, low pressure loss, and ACS sanitary certification for drinking water.

Automatic inlet valve for water meters with anti-fraud system, ACS sanitary certification, and minimal pressure loss. Designed for individual meter banks and connections, compatible with DN13, DN15, and DN20.

Gate valves with soft sealed wedges with threaded ends are designed to close and open the flow of clean liquids, including clean drinking water, non-aggressive sewage, free of solid contamination, at the maximum temperature of medium up to 70°C and the nominal pressure up to 10 bar for valves PN10

Automatic linear threaded valve with swivel nut for water meters DN 13, 15 and 20 mm. Designed for meter banks and individual connections, it offers minimal pressure loss, maximum watertightness and anti-fraud protection, complying with UNE and ACS sanitary regulations.

The Series S70/S90 Threaded Ball Valves are designed to comply with MSS-SP 72 and tested to comply with MSS-SP 72. The design standard is MSS SP-110.

The series of filters with screw connection includes class P3 particle filters, class 2 gas filters and class 1 and 2 P3 combined filters, equipped with standardized threaded connection EN 148-1. The casing is in blue plastic with a diameter of 100 mm; its height varies according to the type (100,

Air release valves permit trapped air to be released from piping systems without losing water pressure. The small orifice releases air under pressure during normal pipeline operation. The float is connected to the vent via a linkage mechanism which is capable of operating the vent under full pipelin

Coupling pin for torch side installation according to EN 561, ISO 7289 -no mixing up by different coding of coupling pins -prevents accidental disconnection

Coupling pin for tapping point or in-hose according to EN 561, ISO 7289 -no mixing up by different coding of coupling pins -prevents accidental disconnection

SS 316, Stainless Steel, CF8M Swing Check Valve Trim 10 • Sizes available: 1/2" to 3" Features • Investment Casting Stainless Steel • NPT Threaded Connection • Threaded Cap • Suitable for Constant Temperature: -20°F to 302°F • Temperature range with peak spikes: -20°F to 360°F • Design and Manufactu

Full port press-fit/threaded bronze ball valve PN16