Metalpol
METALPOL is one of the oldest plants in the metallurgical sector in Poland; steelworks—the predecessor of today's foundry—was founded in 1838. The company manufactures castings for various industries, including automotive, machinery, agriculture, construction, public works, mining, and railway engineering, producing both gray and ductile cast iron products. METALPOL is committed to delivering high-quality products that meet European standards, ensuring reliability, professionalism, and modernity.
All Products(4)
UNDERGROUND HYDRANT 852/R DN100 WITH THREADED CONNECTION 6”
Underground hydrants Dn100 PN10 with threaded connection 6” are intended for uptake of clear and inactive water, which is free from sand, gravel and metal particles and any similar solid bodies under the pressure from 1,0 to 1,6 MPa, and the temperature up to 323°K (50°C), for the fire-fighting purpose. Underground fire hydrants are made in accordance with the requirements relating to fire safety.
View Product
GATE VALVE UG-2GW DN 25-50 WITH THREADED END
Gate valves with soft sealed wedges with threaded ends are designed to close and open the flow of clean liquids, including clean drinking water, non-aggressive sewage, free of solid contamination, at the maximum temperature of medium up to 70°C and the nominal pressure up to 10 bar for valves PN10 and 16 bar for valves PN16. Closing of the gate valve proceeds by turning the stem in the clockwise direction. On the Purchaser’s request, the anticlockwise closing is also available. All the gate valves specified in this leaflet may be installed into horizontal or vertical pipelines.
FLANGED GATE VALVE 111UG DN40-DN300
Gate valves with soft sealed wedges are designed to close and open the flow of clean liquids, including clean drinking water, non-aggressive sewage, free of solid contamination, at the maximum temperature of medium up to 70°C and the nominal pressure up to 10 bar for valves PN10 and 16 bar for valves PN16. On request gate valves may be adapted to water at the temperature of 120°C, pressure 10 bar. Closing of the gate-valve proceeds by means of a hand wheel and turning the hand wheel in the clockwise direction (when facing the top of the valve). On the Purchaser’s request, the anticlockwise closing is also available. Gate valves described in this catalogue card can be installed in horizontal and vertical pipelines. Gate valves DN250-300 are recommended to be installed only in horizontal pipelines in a vertical position.
FLANGED VALVE FOR GAS INSTALLATIONS AND NETWORKS
Cast iron gate valves with fully rubbered wedge are design for closing/ opening the flow of gas in distribution installations of natural gases at the maximum operating pressure of 16 bar and the gas temperature from -20°C do +60°C. Gate valves described in this catalogue card can be installed in horizontal and vertical pipelines. Gate valves DN250-300 are recommended to be installed only in horizontal pipelines in a vertical position.