Engineered for you, they provide real-time cleanroom particle counting in an easy-to-use, reliable instrument that's ready for measurement. Built-in global regulatory guidance and international standards, such as ISO 14644-1:2015, ISO 21501-4:2018, EU GMP Annex 1 (2008 and 2022), and China GMP, make

The 2301 particle counter provides a particle size measurement range of 0.3 or 0.5 to 25.0 μm at a flow rate of 0.1 CFM (2.83 LPM). These sensors enable efficient particle counting with specifications that exceed ISO 21501-4 and JIS B9921 calibration standards. These sensors have 4 fixed-size parti

Their small size, flexible power options and wireless capabilities allow installation where space is limited. Worry-free monitoring with best-in-class data buffering reduces risk of data loss during network outages. Only the AeroTrak™+ Remote Particle Counters are backed by an industry exclusive 5 y

The Particles Plus® 8301-AQM1 and 8301-AQM2 Series portable particle counter and environmental monitor measures particles from 0.3 to 25 µm in mass concentration and stores indoor air quality measurements of temperature, relative humidity, CO2, and TVOC in the 8301-AQM2. This instrument is the most

The only accepted method to replace active and passive air sampling in Grade A. This biofluorescent particle counter provides real-time counts of total and viable particles in pharmaceutical manufacturing environments to reduce aseptic interventions, improve root-cause investigations, and increase p

Automated Filter Tester Model 3160 determines the pressure drop and fractional efficiency at different particle sizes (<15 to 800+ nm) in order to obtain the most penetrating particle size (MPPS) of HEPA and ULPA filters and filter media. It is designed to comply with the test requirements of EN 182

Medicoat AG supplies pure titanium powders for coating of medical components by atmospheric and vacuum thermal plasma spray processes. Quality standards We adjust the particle size distributions of the diverse powder products we supply and we remove any iron contaminations which sometimes remain i

The VPC300 is a Video Particle Counter with built-in Camera. Measures up to 6 channels of particle sizes plus air temperature and relative humidity. Used for capturing videos and photos that are stored onto internal memory or a micros card. The VPC300 can measure up to 6 channels of particle sizes p

The mastery of the synthesis, atomization and calcination processes makes it possible to obtain a perfectly spherical powder, of high crystallinity, with all the physical and chemical characteristics in compliance with the international standards (ASTM F1185, ISO13779). MedicalGroup develops powders

β-TCP Compound Powder Our β-TCP Compound Powder is created through spray drying, resulting in particle sizes primarily ranging from 20 to 60 µm. Its highly porous surface makes it ideal for processing with polymers, particularly in the production of medical implant composites such as bone screws, in

HAP/TCP abrasives. What is it about? Medicoat has developed an resorbable calcium phosphate based abrasive (HAP/TCP) with dense and hard grain size. Applications Blasting of dental implants, cleaning of 3D printed parts. Properties Complies with standards: ASTM F1185 and F1088 Composition : Pure b

Specfications Instrument type Float Type Level Alarm with guiding tube. Explosion safety Type: II 1/2G Ex ia IIC T4 -40≤Ta≤ 60°C Standards: EN 60079-0:2009, EN 60079-11:2007, EN 60079-26:2007, EN 13462-1:2009 Products Type of products: Liquids, including liquefied gasses Viscosity: ≤ 100 mPa.s Sol

Pressure Ranges 40 psig to 100 psig 3 bar to 8 bar Temperature Ranges – Std.(NBR O-rings) : 20°C~80°C (-4°F~176°F) – Lower Temp. (Silicone O-rings) : 40°C~80°C (40°F~176°F) – High Temp. (Viton O-rings) : 15°C~150°C (+5°F~300°F) – Note : Special grease is required for low and high temperature service

HTD FEATURE Pressure Ranges 40 psig to 100 psig 3 bar to 8 bar Temperature Ranges – Std.(NBR O-rings) : 20°C~80°C (-4°F~176°F) – Lower Temp. (Silicone O-rings) : 40°C~80°C (40°F~176°F) – High Temp. (Viton O-rings) : 15°C~150°C (+5°F~300°F) – Note : Special grease is required for low and high tempe

SMPS+C system in 19” rack-design, available as SMPS+C 5420 CEN with a size range of 10 nm to 1,090 nm for full compliance with CEN/TS 17434:2020 or as model SMPS+C 5420 version with M DMA for a size range of 5 nm to 350 nm. It is designed for unattended 24/7 real-time monitoring of UFP in ambient ai

Instrument type Float Type Level Alarm with guiding tube. Explosion safety Type: II 1/2G Ex ia IIC T4 -40≤Ta≤ 60°C Standards: EN 60079-0:2009, EN 60079-11:2007, EN 60079-26:2007, EN 13462-1:2009 Products Type of products: Liquids, including liquefied gasses Viscosity: ≤ 100 mPa.s Solids content:

The PAMAS FSA-2002 Floc Size Analyser has been designed for coagulation and water treating systems. Water is often treated by adding flocculents. These flocculation agents are used to gather solid undissolved contaminants to particulate agglomerates. Before the process of filtration commences, the f

JM Eagle's high-density polyethylene water and sewer pipe is available in 3/4-inch to 63-inch diameters. The product’s physical properties make it applicable to open-trench, horizontal directional drilling, pipe-bursting and slip-lining installations. It can be manufactured with the color striping t

Astral ChemPro is a reliable CPVC piping system that meets the demanding requirements of industrial applications. It has been providing trouble-free service to various industries for years. The Astral ChemPro industrial piping system is capable of handling temperatures up to 93°C (intermittently up

Aquarius+ offers lead-free uPVC pipes and fittings that adhere to ASTM standards. These non-toxic components are not only easy to install but also ensure a lifetime of trouble-free service. Astral Aquarius+ pipes and fittings are available in a comprehensive range of sizes, from 1.5 cm (1/2″) to 30

IPS-sized PVC pipes ranging from 1 ½” to 12” in various SDR ratings, suitable for different pressure requirements.

TP08 is a probe that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at a high accuracy level. It works in compliance with the ASTM D5334-14, D5930-97 and IEEE 442-1981 standards. The TP08 i

The 15 gauge 6515 series glove is unique, not only can the color be spotted but provides dexterity and cut protection for the employee on the line. Knitted with high-performance fibers and wire to achieve the level of cut resistance needed for protection without sacrificing dexterity. New and impro

JWWA B138 compliant DN100 - DN2200 0.44MPa - 0.98MPa FCD450-10

UL / FM (including UL-Canada) at 300 psi. The UL / FM Post Indicator Gate Valve – Flange x Flange meets AWWA C515-15 Standard. Flanges are to ASME B16.1, Class 125, or ASME B16.42, Class 150 Standard. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard. NSF-61 and NSF-372 Certifie