PN16 reinforced body in CW617N brass, manufactured in accordance with UNE 12165. PTFE seats and certified O-rings (KTW and Kiwa). Actuated by an ergonomic carbon steel handle coated with high performance anticorrosion black layer. Designed and tested according to standard UNE EN ISO 21003 standards.

Ball valve with press fitting for multilayer pipes and red stainless steel handle. Reinforced body made of CW617N brass, in accordance with UNE EN 12165, PTFE shaft and seat packing and certified O-rings (KTW and Kiwa). Model 4064 has a stainless steel handle to open and close the valve with less ef

Ball valve with press fitting for multilayer pipes and red stainless steel handle. Reinforced body made of CW617N brass, in accordance with UNE EN 12165, PTFE shaft and seat packing and certified O-rings (KTW and Kiwa). Model 4064 has a stainless steel handle to open and close the valve with less ef

PEX-AL-PEX 3 Layer Composite Piping System

TORO 25 FIBER EvO system consists of three-layer pipes made of PP-R EvO, Random Cpolymer Polypropylene with special and improved crystalline structure, reinforced with glass fiber, used for the adduction of pressure fluids. This particular blend is called Fiber Evo: Fiber → glass fiber ; EvO → PP-R

TORO 25 system consists of monolayer pipes made of Random Copolymer Polypropylene, used to supply fluids under pressure. TORO 25 system represents a modern option to the use of traditional materials for the transport of pressure fluids in hot/cold water supply systems, in the residential, commercial

PN16 globe valve with bellows and flanges in accordance with EN-1092-1. Made of GS-C25 carbon steel with RAL5013 epoxy paint coating, 2Cr13 Stellite stainless steel seat, A-304 stainless steel bellows and graphite gaskets. The valve withstands a maximum working pressure of 16 bar and an operating t

ate valve with flanges, fixed shaft and EPDM resilient wedge. Made of GGG50 cast iron with RAL5013 epoxy paint coating, resilient cast iron seat + EPDM coating and flanges in accordance with DIN EN-1092-2. The gate valve is used to open or close the flow of fluids and in some cases to regulate the f

A polypropylene piping system designed for hot and cold water distribution, offering high resistance to chemical agents and high temperatures.

PN16 globe valve with flanges in accordance with DIN 2501. Made of GG25 cast iron with RAL5013 epoxy paint coating, A-304 stainless steel seat and graphite gaskets. The valve withstands a maximum working pressure of 16 bar (250 psi) and is suitable for operating temperatures from -20 to 200°C. Model

Hot and cold water installations Marine industry Fluid excluding acid and non flamme fluids

Hot and cold water installations Fire fighting systems Marine industry

Tee 90° – male thread

Fluids used • Steam • Hot Oil • Water, hot water, hot water • Compressed air, LPG • Fuel oil • Heat transfer oils • Chemicals etc. fluids Advantages • Does not contain asbestos • Provides energy savings • Does not require continuous maintenance • Does not leak into the atmo

ASTM D638, ISO 527-1, ISO 527-2, JIS K7113 ASTM D638 method is used to determine tensile properties of plastics The most significant properties are: tensile strength, strain at rupture and yield modulus, for quality control and mechanical specifications. Generally, samples are: rigid, semi-rigid, an

Manufactured in factory conditions operating to quality management standard BS EN ISO 9001:2015, environmental management standard BS EN ISO 14001: 2015 and occupational health and safety management standard BS EN ISO 45001:2018. Full traceability of all component materials and certified ‘very good’

Brass ball valve full bore - ISO 228/1 thread according to EN 13828 - Temperature rating: -20 ºC, +120 ºC - Pressure rating: PN14 ÷ PN50

Brass ball valve reduced bore - ISO 228/1 thread according to EN 13828 - Temperature rating: -20 ºC, +120 ºC - pressure rating: PN20 ÷ PN64

ARIZONA - SERIES 600 Brass ball valve standard bore - ISO 228/1 thread according to EN 13828 - Temperature rating: -20 ºC, +120 ºC - Pressure rating: PN20 ÷ PN40

Introducing Easyflex FIP Thread isolation valve kits that consist of one hot and one cold water valve made of lead-free brass, along with an optional pressure relief valve. To cover a wide range of applications, we offer connection sizes in 3/4″ and 1″. All of our valves comply with NSF 372 regulati

The Aquafloat Suit is a constant wear floatation suit tested according to ISO 15027: Class D for 2 hours thermal protection in cold water.

Cash Acme’s Tankless Water Heater Kit makes tankless water heater installs quick and easy. The kit includes a hot water shut off valve, a cold water shut off valve, and a pressure relief valve. Features and benefits: Unique 3-way ball valve design provides a single turn level handle for ease of use

The North Sea one piece suit is a constant wear floatation suit tested according to ISO 15027: Class D for 2 hours thermal protection in cold water.

The Dan W3 Polar is designed and developed to withstand the harsh maritime environment and type approved for temperature down to -52 degree Celsius. This makes the Dan W3 Polar optimal for use on any expedition cruises or commercial Deepsea sailing in arctic or antarctica waters. It is recommended t