MT Valves & Fittings

PN16 globe valve with flanges in accordance with DIN 2501. Made of GG25 cast iron with RAL5013 epoxy paint coating, A-304 stainless steel seat and graphite gaskets. The valve withstands a maximum working pressure of 16 bar (250 psi) and is suitable for operating temperatures from -20 to 200°C. Model 5131 is manufactured and designed in accordance with DIN 86251-1974, face-to-face distance in accordance with DIN 3202 F1 and is ideal for use with hot and cold water, oil, diesel and steam. It is quick and easy to install, which saves time and makes it easy to assemble. MT Industrial Division products are high-quality parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Manufactured in GG-25 cast iron RAL5013 epoxy paint coating (250 μ) AISI-304 stainless steel seat Graphite gaskets Manufactured in accordance with standards: DIN 86251, DIN 2501, DIN3202 F1, EN-1092-2 Maximum working pressure: 16 Bar (PN16) Operating temperature: -20°C / 200°C

PN16 globe valve with bellows and flanges in accordance with EN-1092-1. Made of GS-C25 carbon steel with RAL5013 epoxy paint coating, 2Cr13 Stellite stainless steel seat, A-304 stainless steel bellows and graphite gaskets. The valve withstands a maximum working pressure of 16 bar and an operating temperature range of -10 to 400°C. Model 51302 has been designed and manufactured to DIN 3356-82, to EN13709, face-to-face distance to DIN 3202 F1 and is ideal for use with hot and cold water, steam, oils and neutral chemicals. It is quick and easy to install, which saves time and makes it easy to assemble. MT Industrial Division products are high-quality parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Manufactured in GS-C25 carbon steel RAL5013 epoxy paint coating (250 μ) 2Cr13 Stainless Steel Seat AISI-304 stainless steel bellows and Graphite gaskets Manufactured in accordance with standards: DIN 3356-82, EN-1092-2, DIN3202 F1 Maximum working pressure: 16 Bar (PN16) Operating temperature: -10°C / 400°C

Wafer type butterfly valve with universal flange, chrome-plated ductile cast iron disc and rigid EPDM seat. Manufactured in cast iron with RAL5013 epoxy paint coating and flange in accordance with ANSI B16.5 class 125/150 and UNE-EN-1092 (PN10/16). The butterfly valve is used to partially or completely shut off the flow of a fluid. It withstands a maximum working pressure of 16 bar (250 psi) and can operate from -20 to 120°C (-4 to 120°F). Model 5115 is ideal for application in water treatment and distribution, mining industry, fire-fighting and irrigation systems. MT cast iron valves are designed and manufactured in accordance with EN 593, testing and inspection in accordance with EN 12266-1, face-to-face distance in accordance with EN 558 (20 series) and ISO 5211 direct mounting pad. They can be installed both horizontally and vertically. MT Industrial Division products are high-quality parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Manufactured in Nodular GGG-40 (GJS-400) cast iron Epoxy paint coating RAL5013 (250μ) EN-GJS-400 chrome-plated ductile cast iron disc Seat material: EPDM Design in accordance with EN-12334, DIN 3202, EN 558-1 Prepared for flange according to ANSI 125/150 and EN-1092 (PN10/16) (DIN 2576-2502) Face to Face according EN-558-1, Serie 20 Operating temperature: -20°C / 120°C Max. Working Pressure: 1 ½” – 12”: 250 PSI / 16bar. 14” – 24”: 150 PSI / 10bar

PN16 lug type butterfly valve with NBR seat and A-316 stainless steel disc. Made of ductile GGG40 cast iron with RAL5013 epoxy paint coating. The valve is suitable for shutting off the flow of a fluid partially or completely. It withstands a maximum working pressure of 16 bar (250 psi) and can withstand operating temperatures from -20 to 80°C . Model 5144 is ideal for use in air conditioning, ventilation, heating, water, gas, oil and hydrocarbon treatment and distribution, fire-fighting and irrigation systems. It can be installed both vertically and horizontally. MT cast iron valves are flanged in accordance with EN-1092 (PN16). MT Industrial Division products are high-quality parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Ductile Iron body GGG-40 Epoxy coating paint RAL5013 Stainless Steel disc AISI 316 (ASTM A276) Prepared for flange according to EN-1092: DN50 to DN150 PN10/PN16. DN200 to DN300 PN16. Face to face according to EN-558-1 (series 20) Direct Mounting Pad ISO 5211 Valves for water supply EN-1074 Performance requirements according to AWWA C-550 NBR shore 70 disc seat according to EN-681 Working temperature: -10° to 80°C Max. Working Pressure: 16 bar

Wafer-type butterfly valve with EPDM seat and cast iron disc with polyamide 11 coating to extend the life of the disc in case of acidic water or water with dissolved salts. Manufactured in nodular GGG-40 cast iron with RAL3020 epoxy paint coating and flanges in accordance with UNE-EN-1092 (PN6/10/16) and ANSI B16.5 class 125/150. The valve is suitable for partial or complete shut-off of a fluid and for use in air conditioning, ventilation, heating, water treatment and distribution, mining industry, chemical and petrochemical plants, sugar industry and sanitary systems. It withstands a maximum working pressure of 16 bar (250 psi) and an operating temperature of -20 to 120°C. Model 5140 can be installed either vertically or horizontally. MT cast iron valves are designed and manufactured in accordance with EN 593, testing and inspection in accordance with EN 12266-1, face-to-face distance in accordance with EN 558 (20 series) and ISO 5211 direct mounting pad. MT Industrial Division products are high-quality parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Ductile Iron body GGG-40 with Epoxy coating paint RAL5013 Ductile Iron disc GGG-40 + Polyamide 11 coating Prepared for flange according to ANSI 125/150 and DIN 2576-2502 (PN10/16) Face to face according to EN-558-1 (series 20) Direct Mounting Pad ISO 5211 Valves for water supply EN-1074 Performance requirements according to AWWA C-504 EPDM disc seat according to EN-681

Wafer type butterfly valve with universal flange, A-316 stainless steel disc and NBR soft seat. Manufactured in GGG-40 cast iron with RAL5013 epoxy paint coating and flange in accordance with UNE-EN-1092 (PN6/10/16) and ANSI B16.5 class 125/150. The butterfly valve is used to partially or completely shut off the flow of a fluid. It withstands a maximum working pressure of 16 bar and can operate at temperatures from -20 to 80°C. Model 51142 is ideal for use in air conditioning, ventilation, heating, water treatment and distribution, gas, oil and hydrocarbons, fire-fighting systems, irrigation systems, chemical, pharmaceutical and mining industries. MT cast iron valves are designed and manufactured in accordance with EN 593, testing and inspection in accordance with EN 12266-1, face-to-face distance in accordance with EN 558 (20 series) and ISO 5211 direct mounting pad. They can be installed both horizontally and vertically. MT Industrial Division products are high-quality parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling.

Wafer type butterfly valve with universal flange, A-316 stainless steel disc and EPDM soft seat. Manufactured in GGG-40 cast iron with RAL5013 epoxy paint coating and flange in accordance with UNE-EN-1092 (PN6/10/16) and ANSI B16.5 class 125/150. The butterfly valve is used to partially or completely shut off the flow of a fluid. It withstands a maximum working pressure of 16 bar and can operate at temperatures from -20 to 120°C. Model 5114 is ideal for use in air conditioning, ventilation, heating, water treatment and distribution, fire-fighting systems, irrigation systems, chemical, pharmaceutical and mining industries. MT cast iron valves are designed and manufactured in accordance with EN 593, testing and inspection in accordance with EN 12266-1, face-to-face distance in accordance with EN 558 (20 series) and ISO 5211 direct mounting pad. They can be installed both horizontally and vertically. MT Industrial Division products are high-quality parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Ductile Iron body GGG-40 with Epoxy coating paint RAL5013 Stainless Steel disc AISI 316 (ASTM A276) Prepared for flange according to ANSI 150, DIN 2576- 2502 and EN-1092 (PN6-PN10-PN16) Face to face according to EN-558-1 (series 20) Direct Mounting Pad ISO 5211 NBR shore 70disc seat according to EN-681 Working Temperature: -10 to 120°C Maximum Working Pressure: 1 ½” – 6”: 300 PSI / 20bar 8” – 12”: 250 PSI / 16bar 14” – 24”: 150 PSI / 10bar

Body in Ductile iron EN GJS-400 Stem in stainless steel AISI 420 Wedge in rubber EPDM Body epoxy coated Working pressure: 16 bar Working temperature: -10ºC to 120ºC

ate valve with flanges, fixed shaft and EPDM resilient wedge. Made of GGG50 cast iron with RAL5013 epoxy paint coating, resilient cast iron seat + EPDM coating and flanges in accordance with DIN EN-1092-2. The gate valve is used to open or close the flow of fluids and in some cases to regulate the flow of fluids. It withstands a maximum working pressure of 16 bar (250 psi) and is suitable for operating temperatures from -10 to 80°C. Model 5113 has a handwheel or square handle and is ideal for hot and cold water, irrigation, sewage and septic tank applications as well as fire and chemical neutral systems. MT cast iron valves have been designed in accordance with the standards UNE EN-1074, UNE EN-1171 and DIN 3352 and can be installed both horizontally and vertically. MT Industrial Division products are high-quality parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Made of GGG-50 (EN-GJS-450) cast iron Epoxy coating RAL5013 (250 μ) Resilient cast iron seat with EPDM coating Handwheel or square handle drive Flanged end according DIN EN-1092: DN40-DN150: PN10/16. DN200-DN600: PN16 Maximum working pressure: 16 Bar (PN16) Operating temperature: -10°C / 80°C

Three-piece ball valve with female-female threaded connection, full bore and blue handle. Body and ball made of CF8M (A-316) stainless steel, reinforced PTFE ball seats and BSP threads in accordance with ISO 228/1 (DIN 259). The ball valve is used to completely open and close the flow of fluids and is suitable for use in systems for hot and cold water, steam, oils, chemicals, solvents, fluids, air and foodstuffs such as wine and oil. It has an operating temperature of -20 to 180°C and a maximum working pressure of 63 bar (1000 psi). Model 0911 is suitable for both vertical and horizontal installation. MT ball valves are manufactured using the microfusion process. MT Industrial Division products are high-quality stainless steel parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Body and ball made of CF8M (AISI-316) stainless steel Ball seats made of reinforced PTFE F-F BSP threads according to ISO 228/1 (DIN 259) Full bore Maximum working pressure: 63 bar (1000 psi) Operating temperature: -20° / 180°

One-piece ball valve with female-female threaded connection, reduced bore and blue lever. Body and ball made of CF8M (A-316) stainless steel, PTFE ball seats and F-F BSP ISO 7-1 threads. The ball valve is used to completely open and close the flow of fluids and is suitable for use in hot and cold water, steam, oil and chemical systems. It has an operating temperature of -20 to 180°C and a maximum working pressure of 63 bar (1000 psi). Model 0909 is suitable for both vertical and horizontal installation. MT ball valves are manufactured using the microfusion process. MT Industrial Division products are high-quality stainless steel parts, specifically designed for industrial contexts. The entire range is manufactured under strict quality parameters and complies with the highest certifications in fluid handling. Body and ball in CF8M (AISI-316) stainless steel Ball seats in PTFE F-F BSP threads in accordance with ISO 228/1 (DIN 259) Maximum working pressure: 63 bar (1000 psi) Operating temperature: -20° / 180° Reduced bore

PN16 reinforced body in CW617N brass, manufactured in accordance with UNE 12165. PTFE seats and certified O-rings (KTW and Kiwa). Actuated by an ergonomic carbon steel handle coated with high performance anticorrosion black layer. Designed and tested according to standard UNE EN ISO 21003 standards. Compatible with multilayer pipes. Guaranteed sealing with 2 EPDM O-ring (Kiwa Class III). Connector toothed profile with optimum angle bevel in order to facilitate the insertion of the pipe. Maximum working temperature: 95ºC at 10 bar. Guaranteed for hot/cold drinking water and compressed air. 100% designed in Spain.

Ball valve with press fitting for multilayer pipes and red stainless steel handle. Reinforced body made of CW617N brass, in accordance with UNE EN 12165, PTFE shaft and seat packing and certified O-rings (KTW and Kiwa). Model 4064 has a stainless steel handle to open and close the valve with less effort. The ball valve has a serrated profile with an optimally angled bevel to facilitate pipe insertion. Watertightness ensured by double EPDM O-rings. Model 4064 is particularly suitable for use in cold water, hot water and compressed air. It withstands a maximum temperature of 95°C at 10 bar and is designed in accordance with UNE-EN ISO 21003 to be used with different types of pressing profiles such as TH, H, U and RFz. The wide range of MT valves aims to cover all market needs and satisfy the specific requirements in all geographical areas of the world and the various applications in sectors such as industry, plumbing, heating, irrigation, etc. CW617N brass body, manufactured in accordance with UNE EN 12165. Designed in accordance with standard UNE-EN ISO 21003. Compatible with multilayer pipe diameters: Ø16x2, Ø20x2, Ø25x2.5, Ø26x3 and Ø32x3. Watertightness ensured by 2 EPDM O-rings (Kiwa Class III) Durable marking (size and manufacturer) including body and pressing rings. Serrated profile with optimally angled bevel for easy pipe insertion.

Ball valve with press fitting for multilayer pipes and red stainless steel handle. Reinforced body made of CW617N brass, in accordance with UNE EN 12165, PTFE shaft and seat packing and certified O-rings (KTW and Kiwa). Model 4064 has a stainless steel handle to open and close the valve with less effort. The ball valve has a serrated profile with an optimally angled bevel to facilitate pipe insertion. Watertightness ensured by double EPDM O-rings. Model 4064 is particularly suitable for use in cold water, hot water and compressed air. It withstands a maximum temperature of 95°C at 10 bar and is designed in accordance with UNE-EN ISO 21003 to be used with different types of pressing profiles such as TH, H, U and RFz. The wide range of MT valves aims to cover all market needs and satisfy the specific requirements in all geographical areas of the world and the various applications in sectors such as industry, plumbing, heating, irrigation, etc. CW617N brass body, manufactured in accordance with UNE EN 12165. Designed in accordance with standard UNE-EN ISO 21003. Compatible with multilayer pipe diameters: Ø16x2, Ø20x2, Ø25x2.5, Ø26x3 and Ø32x3. Watertightness ensured by 2 EPDM O-rings (Kiwa Class III) Durable marking (size and manufacturer) including body and pressing rings. Serrated profile with optimally angled bevel for easy pipe insertion.

MT Platinum Series PN40 ball valve female-female connection, full bore with ergonomic handle. Manufactured with reinforced DZR CW602N brass body and stainless steel shaft, with optimum mechanical and thermal characteristics. Model 4104 has a black ergonomic stainless steel handle to open and close the valve with less effort. The valve, ideal for domestic or professional use in plumbing, heating, thermal energy or irrigation systems, withstands a pressure of 40 bar. Its FKM seals made of fluoro-rubber allow it to be used in temperatures ranging from -20 to 180°C and it has an antifreeze system. The 4104 valve is SINTEF- and ACS-certified. The wide range of MT valves aims to cover all market needs and satisfy the specific requirements and various applications in sectors such as industry, plumbing, heating, irrigation, etc. Full bore Antifreeze System Reinforced body Brass DZR CW602N New ergonomic stainless steel handle with self-locking nut. High corrosion resistance. FKM seals -20° / 180°