Ghibson soft seated butterfly valves (PD, KI, KA and KX series) are designed to fit in industrial applications from powder conveyance to marine and petrochemical requirements. They are manufactured in different versions and materials and for working pressures from 6 to 25 Bar

Pressure Ranges 40 psig to 100 psig 3 bar to 8 bar Temperature Ranges – Std.(NBR O-rings) : 20°C~80°C (-4°F~176°F) – Lower Temp. (Silicone O-rings) : 40°C~80°C (40°F~176°F) – High Temp. (Viton O-rings) : 15°C~150°C (+5°F~300°F) – Note : Special grease is required for low and high temperature service

HTD FEATURE Pressure Ranges 40 psig to 100 psig 3 bar to 8 bar Temperature Ranges – Std.(NBR O-rings) : 20°C~80°C (-4°F~176°F) – Lower Temp. (Silicone O-rings) : 40°C~80°C (40°F~176°F) – High Temp. (Viton O-rings) : 15°C~150°C (+5°F~300°F) – Note : Special grease is required for low and high tempe

pneumatic actuator for 1/2"- 4" quarter turn valve

Bonney Forge cryogenic valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded join

Bonney Forge is a leading globe valves manufacturer which are used for flow regulation, frequent operation, increased flow resistance, or for positive shut off when closed. Globe valves are closing-down valves in which the closure member is moved squarely on and off the seat. By this mode of disc tr

Bonney Forge is a leading gate valves manufacturer which are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a t

Fluids used • Steam • Hot Oil • Water, hot water, hot water • Compressed air, LPG • Fuel oil • Heat transfer oils • Chemicals etc. fluids Advantages • Does not contain asbestos • Provides energy savings • Does not require continuous maintenance • Does not leak into the atmo

Wafer type butterfly valve with universal flange, A-316 stainless steel disc and EPDM soft seat. Manufactured in GGG-40 cast iron with RAL5013 epoxy paint coating and flange in accordance with UNE-EN-1092 (PN6/10/16) and ANSI B16.5 class 125/150. The butterfly valve is used to partially or completel

Casted body and bonnet Bolted bonnet (BB) Rising stem (RS), outside screw and yoke (OS&Y) Wedge may be one-piece flexible or split wedge type

In your industrial pipelines, Globe Valve (DIN) is a long-life solution, compliant with DIN/EN standards, for precise flow control and reliable shut-off. Thanks to its linear-motion disc, it offers high-quality modulation and, with appropriate leakage classes, helps reduce energy losses.

Gate Valve (DIN) is a type of sliding valve that provides reliable isolation and minimum pressure loss in process pipelines. EMS Valve’s engineering approach in line with DIN/EN standards combines durability, safety and ease of maintenance.

Butterfly valves are used in drinking water networks and water supply lines. Suitable for underground and surface installation. A rubber that provides sealing could be replaced without disassembling other parts. It can also be used with reducer and variousactuators. Butterfly valves are used in to r

Design Casted or forged body and bonnet Bolted bonnet (BB) Rising stem (RS), outside screw and yoke (OS&Y) Parabolic or perforated plug Seats are integral or welded on

Gate Valve (ANSI) is the preferred type of sliding shut-off valve for reliable isolation and minimum pressure loss in process pipelines. EMS Valve’s engineering approach combines durability, safety and ease of maintenance.

Check valves prevent flow reversal automatically, without external actuation. Valland manufactures two families: the swing check valve (model C11), with a hinged disc in a single-piece bolted-bonnet body, available with renewable or fixed seats, soft sealing or metal-to-metal, and a lockable disc op

FEATURE 1/8″~2″ (DN6~DN50) W.P. : 6000 / 10000 PSI W.T. : -20°C~200°C (-4°F~392°F) Thread type : ASME B1.20.1 (NPT) DIN 2999 & BS 21 ISO 7-1 & EN 10226

* Hydrogen service * Steam Jacketed valves * NACE Application * Under ground installations Size Range :- 15mm to 900mm (1/2" to 36") Pressure Class Rating – 150# to 1500" Wrench/Gear/Electrical/Pneumatic/Gas Operated valves Design as per API 6D, API 599, BS 5353 Standard Valves Patterns : Short, Ve