Split body, Full bore Flanged connections Blowout-proof stem Non-removable antistatic devices Cavity pressure balancing hole Live Loaded Packing

Split body, Full bore Flanged connections Blowout-proof stem Non-removable antistatic devices Cavity pressure balancing hole Live Loaded Packing

3-pieces body, Full bore Flanged connections Blowout-proof stem Non-removable antistatic devices

Self-priming, thermoplastic body Monoblock Pool Pump; complete with pre-filter. Models of 1 HP and below - suction Ø is 1,5” and discharge Ø is 2”. Models of 1,5 HP and above - both suction and discharge Ø are 2”. Connection unions are compatible with Fitvalf d50 ball valve handle. Easy opening lid

Self-priming, thermoplastic body Monoblock Pool Pump; complete with pre-filter. Pump shaft in stainless steel. Suction & Discharge 1,5". 2850 rpm - IP55 Motor. Connections are with unions compatible with Fitvalf d50 Ball Valve. Easy opening lid with 40° rotation. “Xylex” lid option for resistance ag

Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, chemical injection and sampling for smaller sizes.

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

2-piece Body Full Port Chrome-Plated Ball Virgin PTFE Seats Adjustable Packing Nut Blow-Out Proof Stem MSS-SP-110 500 psig (1-¼”, 2″) for UL use CSA B125.14 (¼” – 2”) CSA ½, 5 & 125 psi (½” – 2″) CSA ½ & 5 psi (2½” & 3″) 29 in-Hg rating for Vacuum Service UL approved (½” – 2”) FM approved (½” – 2″)

Trunnion ball valves have the obturator bounded by trunnions which do not allow axial displacements of the ball itself in the flow direction; line pressure compresses the seat onto the ball, the contact between surfaces generates the valve sealing; trunnion standard construction ensure automatic cav

Self-priming, thermoplastic body Commercial Pool Pump; complete with 20 l pre-filter. Suction and Discharge 4" (Ø110). Connections are with slip unions. Pump shaft in stainless steel. 1450 rpm - IP55 Motor.

Self-priming, thermoplastic body Commercial Pool Pump; WITHOUT PREFILTER. Pump shaft in stainless steel. 2850 rpm - IP 55 Motor.

IDesign Standards: API 6D and API 608 Sizes: 2″-16″ Pressure Range: Class 150-600 Port: Full Port or Reduced Port Body Materials: WCB, LCC, or CF8M Trim Materials: CS + ENP, Stainless Steel Seat/Seal Materials: PTFE, Devlon / HNBR, FKM End Configurations: Flanged ends Locking Device: Standard with

Sizes: 1/2″ – 2″ Pressure Range: 1500/2000 CWP Port: Full Port Body Materials: WCB or CF8M Trim Materials: 316SS Seat Materials: RPTFE Seal Materials: graphite End Configurations: THD, SWE, THD x SWE Operator: Lever Locking Device: Standard Design Standard: API 608, ASME B16.34 Pressure Test to API

Sizes: 1/2″ – 10″ Pressure Range: ASME Class 150-600 Port: Full Port Body Materials: WCB, LCC, CF8M or CN7M Trim Materials: 316SS standard, CN7M or Monel Seat Materials: TFM, PEEK, PCTFE, PTFE or RPTFE Seal Materials: PTFE or Graphite End Configurations: Raised face flanged ends Operator: Lever type

The 1200L tank shower is designed for simultaneous rinsing of eyes, face, and body in cold climates, where there is a lack of water pressure or inadequate flow rate, and where there is a risk of the water in the pipes freezing. The shower is frost-protected down to -35°C thanks to an immersion heati

The standard ball valve is designed for applications with filtered and treated gases, for moderate minimum and maximum temperatures. This valve configuration is the most competitive in terms of price and lead time. Depending on pressure, size, and service, a floating or trunnion-mounted version is a

Sizes: 1/2″ – 2″ Pressure Range: 1500 CWP Port: Full Port Body Materials: CF8M Trim Materials: 316SS Seat Materials: Kel-F Seal Materials: RPTFE End Configurations: Threaded, SW, THD x SWE ends Operator: Lever Locking Device: Standard Design Standard: API 608, ASME B16.34 Pressure Test to API 598 Co

Body & end caps quality investment casting Regulation (EC) No. 1935/2004; (EU) 10/2011 Tri-Clamp/ Tube/ Ex-Tube/ SMS 3008/ DIN 32676 (T-Clamp) FDA certified O-ring and sealing kits High purity with 0.51~0.64 um (20-25 u-in or 180G/ #180) flow port polish with ISO 5211 direct mounting pad High perfor

Body & end caps quality investment casting T-Clamp, tube weld, SMS 3008 ends High purity with 0.51~0.64 um (20-25 u-in or 180G/ #180) flow port polish FDA certified O-ring and sealing kits with ISO 5211 direct mounting pad up to 4” High performance adjustable stem packing Blow-out proof stem d

Casted body and bonnet Bolted bonnet (BB) Rising stem (RS), outside screw and yoke (OS&Y) Wedge may be one-piece flexible or split wedge type

Casted body and cover Bolted cover (BC) Anti-blowout design The disc can rotate on its axis and thereby prevented the local wear Seats are integral or welded on

PN16 reinforced body in CW617N brass, manufactured in accordance with UNE 12165. PTFE seats and certified O-rings (KTW and Kiwa). Actuated by an ergonomic carbon steel handle coated with high performance anticorrosion black layer. Designed and tested according to standard UNE EN ISO 21003 standards.

Harnesses providing fall protection in elevated work environments.

Size: 2" (50mm) to 56" (1400mm) Class: 150# to 2500# Design: API 6D Ends: FF, RF, RTJ, SW, BW, NPT Bore: Reduced or Full Seat: Soft or Metal to Metal Materials: • Carbon Steel : ASTM A105N, ASTM A 350 Gr. LF2; • Stainless Steel : ASTM A182 F316; • Duplex Stainless Steel : ASTM A182 F51; • Super

Available in Flange x Flange, Flange x Groove and Groove x Groove End Configurations. UL / FM Pressure Relief Valve limits inlet pressure by relieving excess pressure. Pressure sustaining prevents pipe line pressure from rising to a maximum valve. Operates over a Wide Flow Range. Inlet Pressure Adju