Continuing as the leader in the industry, Perry is proud to introduce the SIGMA 40 monoplace hyperbaric chamber to its line of innovative products. This system has a 40.5” Internal Diameter chamber, the largest in the industry, which significantly reduces the incidence of noncompliance due to claust

The 34 inch acrylic cylinder of the SIGMA 34 hyperbaric chamber allows patients to be inclined up to 25 degrees, thereby alleviating the feeling of confinement. This model is easy to install or relocate. Mounted on heavy duty casters, it is maneuverable around corners and hallways and fits through

Our spacious multiplace treatment chambers are designed for ultimate safety and patient comfort as well as ease and simplicity for the operators with the absolute minimum in maintenance. The entire hyperbaric treatment system, including all subsystems, components, and ancillary support systems, is

Has a PFAS (Total Fluorine) concentration of no more than 100 ppm Tested against NFPA 1970 Section 8.21/9.10.1 Test Program and compliance to the restricted substance requirement

Structural fire fighting General fire rescue Bush fire fighting

3 Piece Stainless Steel Fire Safe Ball Valve. Anti Static Device. Full Bore. PTFE Seals. ISO Direct Mount. Locking Device. TUV Certified to API STD 607. ATEX Approved.

3 Piece Stainless Steel Fire Safe Ball Valve. Anti Static Device. Full Bore. PTFE Seals. ISO Direct Mount. Locking Device. TUV Certified to API STD 607. ATEX Approved.

MIFAB® Lil-35-99 HDPE injection molded hydromechanical grease interceptor with flow rating of 35 GPM and grease holding capacity of 83 lbs. Unit shall include: removable baffle assembly, deep seal trap covered by lid, sewer gas stopper, securing latches, internal stainless steel orifice flow control

3 hour temperature rise doors tested to NFPA 252/UL10B/UL10C. Available with vision lites up to 100 sq. inches. See more information below!

60-90 minute fire rated doors with temperature-rise tested to NFPA 252/UL 10B/UL 10C up to 10 ft. tall. Available with full-vision glazing, standard and narrow profiles, multiple hardware options and finishes including custom aluminum clad or stainless steel clad. See below for more information!

20-45 minute fire rated doors tested to NFPA 252/UL 10B/UL 10C up to 10 ft. tall. Available with full-vision glazing, standard and narrow profiles, multiple hardware options and finishes including custom aluminum clad and stainless steel clad. See below for more information!

AMI-SIL® AS and CAS hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). The following AMI-SIL AS and CAS hot work fabrics have been tested and rated to the ANSI/FM 4950 Standard which is now required by the NFPA 51B. AS1800G & AS3600 meet USCG1

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

Design Standards: 1) API 600 (ISO-10434)/API 6D/ASME B16.34 2) BS 1873/ASME B 16.34 3) BS 1868/API6D/ASME B16.34 Size Range: 1) Gate Valve:- ANSI Class 900 : 1/2" to 36" ANSI Class 1500 : 1/2" to 24" ANSI Class 2500 : 1/2" to 24" 2)Globe Valve :- bbANSI Class 900 : 1/2" to 24" ANSI C

Single and Double-Wall Positive Pressure Special Gas Vent engineered for venting today’s high efficiency natural gas-burning or propane fired appliances, categories II, III and IV as defined by the Standard for Gas-Fired Central Furnaces, ANSI Z21.47 and NFPA 54.

"TRUNNION MOUNTED" ball valves are suitable in case of high performances under critical working conditions.

"TRUNNION MOUNTED" ball valves are suitable in case of high performances under critical working conditions.

Floating ball valves, construction to ASME B16.34 – ASME VIII Div.II, 2 piece bolted body, split body,side entry, flanged RF/RTJ to ANSI B16.5, face to face to ANSIB16.10, full/reduced bore, ISO (5211) top work standardized for actuation, metal seated (ball & seats with Tungsten or Chromium Carbides

Single and Double-Wall Pressure Industrial Chimney for Heating Appliances, Boiler Breeching, Generator and Fume Exhaust and other applications as defined by standard NFPA 211.

A trunnion-mounted valve series designed for high-pressure applications in the oil & gas and petrochemical industries. Available in sizes from DN 80 to DN 100 and pressure ratings up to ANSI 2500.

A trunnion-mounted valve series designed for harsh conditions in the oil & gas and petrochemical industries. Available in sizes from DN 150 to DN 250 and pressure ratings up to ANSI 600.

Meet or Exceed the Requirements of NFPA 24 Standard. Indicates the State of the Valve OPEN or SHUT Position. Target Nut to allow 13 to 45 Turns. Protected Windows. Telescoping Operating Rod. Easily Adjustable Indicator OPEN and SHUT Targets. Spray Painted Interior and Exterior meet or exceed all app

Trunnion mounted ball valves, construction to ASME B16.34-API6D, 2/3 piece bolted body, split body,side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A, f