Fire Pump Group Control System Individual control panels are used for electric pump, diesel pump and jockey pump Lock mechanism are used on panels Continuous grounding Pumps can run by manual control and emergency-run mechanical control on controller By the help of Locked Rotor Protection (LRP), i

Design Features According to UL & FM All interior bolt or screw that are exposed to pumped liquid shall be of rolled bronze or corrosion resistant material The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges Bearings shall have an L-10 rating of

Design Features According to UL & FM All interior bolt or screw that are exposed to pumped liquid shall be of rolled bronze or corrosion resistant material The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges Bearings shall have an L-10 rating of

Capacity: 200 GPM – 2000 GPM Pressures: 40 – 355 psi Maximum Working Pressures: 290 to 395 PSI Speed: 1480,1760, 2900,2980, 3000 RPM Dynamically Balanced Impeller extends bearing life and ensures smoother operation. Designed and built as per UL 448 AND NFPA20 for maximum reliability. Constructed in

Capacity: 50 GPM to 1000 GPM Working Pressures: 60 to 234 PSI Speed: 2900,3000, AND 3500 RPM Compliance to NFPA 20 Design Requirements Wide Range of Flows and Pressures Available in Electric Motor and Diesel Engine driven configuration Hydrostatic and Certified Performance Tests Suitable for Commerc

The pump specifications range from 30–3000 m3/h at a pressure on up to 150 mWC and are designed according to the needs of the vessel in question and is customized to meet the needs of required specifications.

The enclosure is H-60 insulated in material AISI 316 stainless steel. All our containerised equipment is designed for easy installation and good access to all major components. The units may be equipped with fire and gas detection and fire extinguishing system. Fire rated container (A-60, H-60, H-1

The diesel/hydraulic is suitable when the main fire pump installation must be done above the draught line, typically in a compartment below deck in the fore peak. A hydraulic driven lift pump will be installed taking suction from a sea chest, pumping the water to the booster pump connected directly

EBITT - UL+FM A ready-to-site pump system designed according to international fire standards. • UL Listed and FM Approved system components • NFPA 20 compliant design • Electric + Electric + Jockey configuration • Electric + Diesel + Jockey configuration • High flow capacity up to 3000 GPM • Pressur

Floway® fire pumps are recognized worldwide for superior quality, top hydraulic performance and long service-life Our expertise in fire pumps stems over 50 years, during which time we have solely concentrated on vertical pump innovation.

Inerex® by Rotarex Firetec is a complete UL, FM & VdS Approved Inert Gas Fire Suppression System that helps you save time and improves productivity

AMI-SIL® AS and CAS hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). The following AMI-SIL AS and CAS hot work fabrics have been tested and rated to the ANSI/FM 4950 Standard which is now required by the NFPA 51B. AS1800G & AS3600 meet USCG1

The Safeprotex Fiberglass Welding Blanket is crafted from heat-cleaned fiberglass, offering high strength, excellent heat resistance, and insulation properties. With a working temperature of 1022°F (550°C), it is suitable for general welding tasks and light to moderate spark protection. However, due

The Safeprotex High Silica Welding Blanket is crafted from High Silica Fiberglass Fabric, offering exceptional thermal protection for industrial welding applications. With a working temperature of 1000°C (1832°F) and the ability to withstand short-term exposure up to 1200°C (2192°F), silica safe wel

The Safeprotex Graphite-Coated High-Silica EV Fire Blanket combines the high-temperature resistance of high-silica materials with the exceptional thermal management capabilities of a graphite coating, making it an advanced solution for extreme high-temperature environments. The graphite coating ensu

Safeprotex Silicone-coated fiberglass fire blanket is an economical solution specifically designed to control electric vehicle (EV) fires in short-duration emergencies. With a continuous temperature resistance of 550°C (1022°F), the silicone coating enhances silicone coated fire blanket’s performanc

The Safeprotex Acrylic-Coated Fiberglass Welding Blanket is constructed from acrylic fiberglass-coated fabric, offering a working temperature range of -18°C to 149°C (0°F to 300°F). The acrylic coating enhances abrasion resistance, mechanical strength, and anti-aging properties, making welding blank

The Safeprotex 1.2m x 1.2m Fiberglass Fire Blanket is the ideal solution for small-scale kitchen fires, widely applicable in home kitchens, small commercial kitchens, workplace kitchens, and workshops. Designed for fast and safe fire suppression, this fire blanket is perfect for extinguishing small

1.8M*1.2M fiberglass fire blanket is designed for medium to large-scale fires and high-risk industrial environments, making it ideal for kitchens, workshops, chemical laboratories, and more. Its large size allows for quick coverage of the fire source, providing more time to extinguish the flames and

Safeprotex 1.1m x 1.1m Fiberglass Fire Blanket is a highly effective fire safety tool designed specifically for home use and small-scale environments, particularly for kitchen and clothing fires. Constructed from untreated fiberglass, this fire blanket offers excellent heat resistance and flame reta

Has a PFAS (Total Fluorine) concentration of no more than 100 ppm Tested against NFPA 1970 Section 8.21/9.10.1 Test Program and compliance to the restricted substance requirement

Tillman® ArcShield® welding curtains & portable welding curtains are the professionals choice. Whether you are looking for welding curtains, portable curtains, or track-mounted welding curtains, Tillman® has a solution for your needs.

Structural fire fighting General fire rescue Bush fire fighting

Tillman® ArcDefender Fiberglass Roll Good Welding Blanket FM Approved Welding Curtain 18 oz. white uncoated fiberglass Heat treated woven coated fiberglass Temperature rating 1,000°F (550°C) Fire resistant qualities used for welding Protects against sparks on vertical plane Provides high visibility