Copper-plated electrode wire with a 2.50% Ni content for semi-automatic welding using C1 (CO2) or M21 (Ar + CO2) shielding gases. The wire's metallurgical properties ensure high-quality welds and reliable wire feeding in mechanized welding. IMT G2Ni2 is designed for single- and multi-pass joints of

The IMI Orton MV Series triple eccentric metal seated valve ensures leak-tight performance in high-pressure, high-temperature, and cryogenic applications. Featuring a precision-engineered triple-offset design, it eliminates sealing surface friction, enhancing durability and reliability. With bi-dire

PIPE LENGTH - Gas, Oil and Water Pipes 6 - 18,5 m PIPE LENGTH - PilING and StructurAL Pipes 6 - 40 m

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

AMI-SIL® AS and CAS hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). The following AMI-SIL AS and CAS hot work fabrics have been tested and rated to the ANSI/FM 4950 Standard which is now required by the NFPA 51B. AS1800G & AS3600 meet USCG1

The IMI C-REX™ double eccentric segmented ball valve delivers reliable, high-cycle performance in severe service applications. Designed for bi-directional tight shutoff, it features a cavity-free, torque-seated design that enhances durability and minimises wear. Available in sizes from DN 12 to 900

2-piece Body Full Port Chrome-Plated Ball Virgin PTFE Seats Adjustable Packing Nut Blow-Out Proof Stem MSS-SP-110 500 psig (1-¼”, 2″) for UL use CSA B125.14 (¼” – 2”) CSA ½, 5 & 125 psi (½” – 2″) CSA ½ & 5 psi (2½” & 3″) 29 in-Hg rating for Vacuum Service UL approved (½” – 2”) FM approved (½” – 2″)

Design Standards: 1) API 600 (ISO-10434)/API 6D/ASME B16.34 2) BS 1873/ASME B 16.34 3) BS 1868/API6D/ASME B16.34 Size Range: 1) Gate Valve:- ANSI Class 900 : 1/2" to 36" ANSI Class 1500 : 1/2" to 24" ANSI Class 2500 : 1/2" to 24" 2)Globe Valve :- bbANSI Class 900 : 1/2" to 24" ANSI C

"TRUNNION MOUNTED" ball valves are suitable in case of high performances under critical working conditions.

"TRUNNION MOUNTED" ball valves are suitable in case of high performances under critical working conditions.

Floating ball valves, construction to ASME B16.34 – ASME VIII Div.II, 2 piece bolted body, split body,side entry, flanged RF/RTJ to ANSI B16.5, face to face to ANSIB16.10, full/reduced bore, ISO (5211) top work standardized for actuation, metal seated (ball & seats with Tungsten or Chromium Carbides

Single and Double-Wall Positive Pressure Special Gas Vent engineered for venting today’s high efficiency natural gas-burning or propane fired appliances, categories II, III and IV as defined by the Standard for Gas-Fired Central Furnaces, ANSI Z21.47 and NFPA 54.

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends

A trunnion-mounted valve series designed for high-pressure applications in the oil & gas and petrochemical industries. Available in sizes from DN 80 to DN 100 and pressure ratings up to ANSI 2500.

A trunnion-mounted valve series designed for harsh conditions in the oil & gas and petrochemical industries. Available in sizes from DN 150 to DN 250 and pressure ratings up to ANSI 600.

UL / FM / AWWA Large Diameter Resilient Seated Gate Valves – Mechanical Joint x Mechanical Joint Ends. 14”-16”-18” Sizes are UL / FM at 250 psi rating. 20” and 24” are UL / FM at 200 psi rating. Manufactured to AWWA C515-15 Standard. Mechanical Joint Ends are to AWWA C111 / AWWA C153 Standard. Stain

Our absolute all-rounder in the segment, the Actor. Thanks to a tank capacity of 5000 litres and working widths from 18 to 45 m this sprayer will meet all your expectations.

Trunnion mounted ball valves, construction to ASME B16.34-API6D, 2/3 piece bolted body, split body,side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A, f

UL / FM at 350 psi, the highest rated pressure in the industry. Full Waterway design offers exceptionally low-pressureloss at high flow rates. Resilient Seated Design. Valve can be dis-assembled,and maintenance performed without removal from the pipeline. Face to Face dimension to ASME B16.1. Flange

Pressure Relief Valve: Limits pipe line pressure by release excess pressure Pressure sustaining: Prevents pipe line pressure from rising to a maximum value Operates over a wide flow range Inlet pressure adjustment range: 65-180psi Can be maintained without removal from the pipe line Flanged to EN109

Type 90 line pressure regulators are manufactured to supply the highest performance both as Line Pressure Regulators (in compliance with ANSI Z21.18 CGA 6.3.) and Gas Appliance Regulators, in compliance with ANSI Z21.80 CSA 6.22. They feature precise regulating control from down to tiny pilot flow.

Type 95 line pressure regulators are manufactured to supply the highest performance both as Line Pressure Regulators (in compliance with ANSI Z21.18 CGA 6.3.) and Gas Appliance Regulators, in compliance with ANSI Z21.80 CSA 6.22. They feature precise regulating control from down to tiny pilot flow.

Gate Valve (ANSI) is the preferred type of sliding shut-off valve for reliable isolation and minimum pressure loss in process pipelines. EMS Valve’s engineering approach combines durability, safety and ease of maintenance.

The trunnion ball valve (ANSI) provides reliable flow control in oil & gas, chemical and general process lines thanks to its low torque requirement, high tightness and long service life. With EMS Valve’s engineering strength and disciplined testing procedures, we deliver fast, safe and cost-effectiv