The HG160 LF is a next generation Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature. The Heatguard 160 is designed to assist in prevention of scalding and thermal shock. The Heatguard 160 LF is a compact, robust, simple product inc

The HG110 D with SharkBite Connections is a triple-listed thermostatic mixing valve that delivers water at a safe 120°F (49°C) or lower from all outlets, while allowing the water heater to be set at a germ-killing 140°F (60°C) or higher which aids in preventing the growth of legionella bacteria in t

Omega® Thermostatic Mixing Valve The OMEGA® Thermostatic Mixing Valve is intended for use in hot water distribution systems, as a hot water extender and/or to limit the distribution temperature supplied to fixtures. The Mixing Valves can be installed at the point of use to temper water for sinks, b

Tempering Valve for Point-of-Use Fixtures The model ST7069, an ASSE 1070 and 1069 Certified Thermostatic Mixing Valve, is Lead-Free and ideal for delivering safe tempered water at the point-of-use fixture(s) such as sinks, baths, showers, or lavatories in residential, commercial, and institutional

Lead-Free Lavatory Mixing Valve With Integral Mounting Feet The model ST70 is an ASSE 1070-certified, lead-free thermostatic tempering valve that protects against dangerously hot water in any commercial sink or lavatory application.

Alpha® Thermostatic Mixing Valve ALPHA® Thermostatic Mixing Valves are installed at the point of use to temper water for sinks, baths, showers, and lavatories. These mixing valves are available in a 1/2” size for commercial, institutional, and industrial applications.

The ET71 Series thermostatic mixing valve blends hot and cold water to provide safe, tempered water for emergency eye wash equipment and safety showers. The tempered water valve is available in four sizes with flow rates from 12–150 GPM at 45 PSID, suitable for commercial, institutional, and industr

The EB75 is a compact, iron-body pressure reducing and regulating valve designed for installations where small size and economy are important. Because of the iron body, this valve is not recommended for use in potable water applications. The EB75 comes factory set at 45 psi but has an adjustment ran

F1960 Full Port Virgin PTFE Seats Double NBR O-ring Packing Blow-Out Proof Stem For Use with PEX Tubing CSA B125.3 ASTM-F1960 AB1953, NSF/ANSI/CAN 61 & 372

F1960 Full Port Virgin PTFE Seats Double NBR O-ring Packing Blow-Out Proof Stem For Use with PEX Tubing CSA B125.3 ASTM-F1960 AB1953, NSF/ANSI/CAN 61 & 372

F1807 Full Port Virgin PTFE Seats Double NBR O-ring Packing Blow-Out Proof Stem For Use with PEX Tubing CSA B125.3 ASTM-F1807 AB1953, NSF/ANSI/CAN 61-G & 372 Certified 5009AB = Base design 5009ABF = with Mounting Foot 5009ABDF = with Drain port & Mounting Foot 5009ABW = with Wing handle

F1807 Full Port Virgin PTFE Seats Double NBR O-ring Packing Blow-Out Proof Stem For Use with PEX Tubing CSA B125.3 ASTM-F1807 AB1953, NSF/ANSI/CAN 61 & 372 Certified 5007ABW =With Wing handle

FEATURE 1/2″~4″ Design : API 602, BS 5352, ASME B16.34 Applicable Rating : Class 150 ~ 2500 Temperature Rating : Up to 500°C Structure Features : Outside Screw & Yoke Bolt Bonnet / Welded Bonnet / Pressure-Seal Bonnet Rising Stem / Non-Rising Handwheel End Connection : Threaded End : ASME B1.20.1 So

The Arrowhead TKC150 Tankless Hot Water Heater Kit makes connecting to your tankless hot water easier and more convenient with a compact design that works in tight spaces. The color-coded hot and cold water valves connect directly to the cold water inlet and the hot water outlet of your tankless hot

The model SV16-LVR ASSE 1016 (Rev. 2011) Certified Temperature/Pressure (T/P) compensating Shower Valve meets the requirements of any shower or tub/shower application where uncompromised bather safety and comfort are required.

The Tri Lok® Cryogenic Triple Offset Butterfly Valve complies with various international standards and certifications, including API 609, ASME B16.34, ASME VIII, API 600, ASME B16.5, ASME B16.47, EN 1092, ISO 7005, ISO 5208, EN12266-1, API 6D, API 598, BS 6755, API 607, ISO 10497, PED, PE(S)R, SIL,

The CTR ASME Series is a trunnion mounted ball valve that offers a large range of applications. It features a split body, and uses C-RPTFE seats for maximum chemical compatibility combined with minimum coefficient of friction. It is a bi-directional, single piston effect, zero leakage valve and has

Butterfly valves are used in drinking water networks and water supply lines. Suitable for underground and surface installation. A rubber that provides sealing could be replaced without disassembling other parts. It can also be used with reducer and variousactuators. Butterfly valves are used in to r

2-piece Body Full Port Chrome-Plated Ball Virgin PTFE Seats Adjustable Packing Nut Blow-Out Proof Stem MSS-SP-110 500 psig (1-¼”, 2″) for UL use CSA B125.14 (¼” – 2”) CSA ½, 5 & 125 psi (½” – 2″) CSA ½ & 5 psi (2½” & 3″) 29 in-Hg rating for Vacuum Service UL approved (½” – 2”) FM approved (½” – 2″)

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

AMI-SIL® AS and CAS hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). The following AMI-SIL AS and CAS hot work fabrics have been tested and rated to the ANSI/FM 4950 Standard which is now required by the NFPA 51B. AS1800G & AS3600 meet USCG1

Design Standards: 1) API 600 (ISO-10434)/API 6D/ASME B16.34 2) BS 1873/ASME B 16.34 3) BS 1868/API6D/ASME B16.34 Size Range: 1) Gate Valve:- ANSI Class 900 : 1/2" to 36" ANSI Class 1500 : 1/2" to 24" ANSI Class 2500 : 1/2" to 24" 2)Globe Valve :- bbANSI Class 900 : 1/2" to 24" ANSI C

The Series M4 Severe Service Ball Valve is manufactured in an ISO 9001:2015 facility and is certified to the requirements of Annex III, Module H of PED 97/23/EC, TSG, CRN, and complies with ASME B16.34 and ASME TDP-1. Testing standards include API 598 and MSS SP 61. The valve features an ISO 5211 mo

Floating ball valves, construction to ASME B16.34 – ASME VIII Div.II, 2 piece bolted body, split body,side entry, flanged RF/RTJ to ANSI B16.5, face to face to ANSIB16.10, full/reduced bore, ISO (5211) top work standardized for actuation, metal seated (ball & seats with Tungsten or Chromium Carbides

UL / FM at 350 psi, the highest rated pressure in the industry. Full Waterway design offers exceptionally low-pressureloss at high flow rates. Resilient Seated Design. Valve can be dis-assembled,and maintenance performed without removal from the pipeline. Face to Face dimension to ASME B16.1. Flange