In facilities such as petrol stations, car washes or workshops where water can be contaminated by light mineral liquids, the use of separator systems is required by law. These systems ensure that the water is cleaned in an environmentally friendly manner so that it can be safely discharged into the

Testing of oil separators according to EN 858-1 to ensure effective separation of light liquids from wastewater.

according EN 858

ACO LipuSmart products integrate the functions of grease separation, sampling, drainage using a lifting plant and a control system for the general system into one product.

Preparing food and cleaning cooking utensils and dishes inevitably produces waste water containing fat. This must not be discharged directly into the sewage system or a sewage treatment plant, as the grease can cause problems in the pipes and water treatment. This is where the KLsepa.pop from KLARO

Air Techniques has been the industry leader for over six decades, empowering dental practices with superior air and evacuation systems. At Air Techniques, we understand how to create an amalgam separator that works in line with your evacuation system and meets all “EPA Dental Rule” requirements. Aca

Featuring a compact design for easy and flexible installation, the Solmetex® NXT Hg5 Amalgam Separator is certified to remove more than 99% of solids from the waste stream of a dental vacuum system. An economical and virtually maintenance-free turnkey solution to EPA compliance. Device designed to

Cooling water systems are designed to circulate cooling water to various types of industrial rotating equipment. Typically, these systems include pumps, heat exchangers, filters, controls and instrumentation. Built under controlled conditions in a fabrication facility, systems are mounted on structu

Systems designed to separate oil and hydrocarbons from surface water runoff, ensuring compliance with environmental regulations. ([aco.co.uk](https://www.aco.co.uk/civils-infrastructure?utm_source=openai))

Applications: Test to ISO 14126, prEN2850, Airbus AITM 1-0008, ASTM D3410, ASTM D6641, JIS K 7076, RAE TR 88012 CRAG methods 400 and 401, QVA-Z10-46-38, ASTM C1358, Airbus document X88SP1105735: “Plain compression test according to AITM 1.0008 A1 and A2 with ZwickRoell HCCF” 'Plain', 'open hole and

The BE-GE 31-series is a range of air suspended seats that offer the highest comfort levels available and are suitable for buses and, trucks. With its wide range of options it can be modified for be use in many different applications. The user friendly control panel can be placed on the seats either

Compact fine filter for supply air systems that require increased temperatures above 70°C (maximum 120°C). Galvanized or stainless steel header frame with glass-threat separator pleat pack combines highest capacity and stability with low pressure drop. Also available in special PWIS free version for

Ultrasonic Treatment Solution The US 100 XL series of independent and automatic ultrasonic cleaning systems for the treatment of reusable medical devices and rigid endoscopes. Ideally suited to busy departments’ needs, the instrument can be easily installed in pre-treatment areas. Baskets can be loa

TUNPROTEC® Model C-A-80-80-NF-NT Zone Control Valve assembly is a factory-assembled and -tested fire zone control valve designed for implementation in TUNPROTEC systems. As fire zone control valve, the Tunprotec Model C-A-80-80-NF-NT Zone Control Valve has been designed to hydraulically control the

The EMB‑SIK‑DA series by ESA‑Pyronics consists of double air high‑speed gas burners designed for direct heating processes in industrial furnaces. Their defining feature is the silicon carbide (SiC) flame tube, which generates a compact, high‑velocity flame—between 60 and 120 m/s depending on the mod

The triple chemical fume hood is a fume hood with a barrier that allows the transfer of products and materials through an open internal wall or a wall that can be opened without removing them from the chemical fume hood. The fume hood body is divided into 3 work cells by front pillars, each cell h

The TATSUNO dispensers of the OCEAN Tower LPG series are used for dispensing liquefied propane butane (LPG) at filling stations for road motor vehicles. They are modern single-sided or double-sided dispensers with one to four dispensing hoses (max. two dispensing hoses on each side of the dispenser)

Lube Oil Consoles, Seal Oil Systems and Control Oil systems are designed to provide pressurized lubricating oil to various types of industrial rotating equipment. Typically, these lube oil systems include pumps, heat exchangers, filters, controls and instrumentation. Built under controlled condition

The HAMANN HL-CONT Plus RiverCruise range of advanced wastewater treatment systems (AWTS) is specifically designed to meet the technical requirements of Commission Directive 2012/49/EU on sewage and greywater discharge for inland waterway vessels. Combining our physical and biological treatment tech

The HAMANN HL-CONT Plus OceanCruise range of advanced wastewater treatment systems (AWTS) are designed to meet or exceed the highest current standards for sewage and greywater discharge. These advanced wastewater treatment systems are suitable for ships operating in the waters of Alaska or the Balti

The Matest Elastic Modulus Determination system is an automatic solution designed to measure the Young's modulus of concrete with high precision. It can be used with high-stability frames of 2000, 3000, 4000 or 5000 kN capacity, coupled with the Servo-Plus Progress automatic servo-controlled system

The ECOPLAN shaft system from Finger-Beton is our further development of the standard shaft system according to DIN EN 1917 and DIN 4034-1. With this, we offer a holistic, perfected complete solution for a shaft structure. The shaft components of the ECOPLAN shaft system feature a factory-integrate