The BEECO® GV-FXG-UL/FM Series is a UL Listed / FM Approved Flanged by Grooved OS&Y (Outside Screw and Yoke) Resilient Seated Gate Valve. It is manufactured in compliance with AWWA C515 Standard. Flanges are to ANSI B16.1, Class 125 drilling pattern. Grooved dimensions are to AWWA C606 Standard. The

The BEECO® GV-FXF-UL/FM Series is a UL Listed / FM Approved OS&Y (Outside Screw and Yoke) Resilient Seated Gate Valve. It is manufactured in compliance with AWWA C515 Standard. Flanges are to ANSI B16.1, Class 125 drilling pattern. The body, bonnet, and wedge (disc) are of high strength ductile-iron

Air release valves permit trapped air to be released from piping systems without losing water pressure. The small orifice releases air under pressure during normal pipeline operation. The float is connected to the vent via a linkage mechanism which is capable of operating the vent under full pipelin

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends

Pressure Relief Valve: Limits pipe line pressure by release excess pressure Pressure sustaining: Prevents pipe line pressure from rising to a maximum value Operates over a wide flow range Inlet pressure adjustment range: 65-180psi Can be maintained without removal from the pipe line Flanged to EN109

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends

Provides the functions of both Air Release Valve and Air / Vacuum Valves. Exhausts large quantities of air at start-up. Provides protection from pipeline collapse due to vacuum. Incorporates both features into one valve. More compact and economical.

Dual air release vents the accumulated small volumes of air during normal system operation. Allows venting of large volumes of air during pipeline filling. Provides protection from pipeline collapse due to vacuum. Flanged to ANSI B16.1, Class 125. Other flange types available upon request. Fusion Bo

Y Strainer meets or exceeds the requirements of UL 321 Standard NPT Blow-Off Outlet on Body and Cover. ASTM A276, Type 304 Stainless Steel Screen. Excellent flow characteristics. Low pressure loss at high flow rates. Grooved Ends to AWWA C606 Standard. Fusion Bonded Epoxy Coated Interior and Exterio

UL Listed Y Strainer meets or exceeds the requirements of UL 321 Standard NPT Blow-Off Outlet on Cover. ASTM A276, Type 304 Stainless Steel Screen. Excellent flow characteristics. Low pressure loss at high flow rates. Flanged Ends to ANSI / ASME B16.1, Class 125. Other flanges available on request.

The AMERICAN Series 2500 Ductile Iron 250 psig AWWA Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. The Series 2500 Resilient Wedge Gate Valve is furnished in configurations that are UL Listed an

Meet or Exceed the Requirements of NFPA 24 Standard. Indicates the State of the Valve OPEN or SHUT Position. Target Nut to allow 13 to 45 Turns. Protected Windows. Telescoping Operating Rod. Easily Adjustable Indicator OPEN and SHUT Targets. Spray Painted Interior and Exterior meet or exceed all app

PN16 lug type butterfly valve with NBR seat and A-316 stainless steel disc. Made of ductile GGG40 cast iron with RAL5013 epoxy paint coating. The valve is suitable for shutting off the flow of a fluid partially or completely. It withstands a maximum working pressure of 16 bar (250 psi) and can withs

The Clow Resilient Wedge Valve, with its unique features and benefits, was the first to be manufactured with both AWWA and UL/FM approval for all water system requirements. Clow Valve Co was the first to introduce, and still leads in the design and technical development, of the bubble-tight resilien

Design Features According to UL & FM All interior bolt or screw that are exposed to pumped liquid shall be of rolled bronze or corrosion resistant material The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges Bearings shall have an L-10 rating of

Design Features According to UL & FM All interior bolt or screw that are exposed to pumped liquid shall be of rolled bronze or corrosion resistant material The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges Bearings shall have an L-10 rating of

Capacity: 50 GPM to 1000 GPM Working Pressures: 60 to 234 PSI Speed: 2900,3000, AND 3500 RPM Compliance to NFPA 20 Design Requirements Wide Range of Flows and Pressures Available in Electric Motor and Diesel Engine driven configuration Hydrostatic and Certified Performance Tests Suitable for Commerc

Available in Flange x Flange, Flange x Groove and Groove x Groove End Configurations. UL / FM Pressure Relief Valve limits inlet pressure by relieving excess pressure. Pressure sustaining prevents pipe line pressure from rising to a maximum valve. Operates over a Wide Flow Range. Inlet Pressure Adju

Available in Flange x Flange, Flange x Groove and Groove x Groove End Configurations. Underwriters Listed at 300 psi. Opens quickly, maintains pressure within close limits. Wide range adjustability –65 psi-180 psi (4.5 –12.4 bar). Pilot operated main valve. Reduced cavitation design. Simple field ad

Capacity: 200 GPM – 2000 GPM Pressures: 40 – 355 psi Maximum Working Pressures: 290 to 395 PSI Speed: 1480,1760, 2900,2980, 3000 RPM Dynamically Balanced Impeller extends bearing life and ensures smoother operation. Designed and built as per UL 448 AND NFPA20 for maximum reliability. Constructed in