The IMI C-REX™ double eccentric segmented ball valve delivers reliable, high-cycle performance in severe service applications. Designed for bi-directional tight shutoff, it features a cavity-free, torque-seated design that enhances durability and minimises wear. Available in sizes from DN 12 to 900

The trunnion mounted side entry ball valve is the most popular ball valve design for Oil & Gas application. The ball is held on a fixed vertical axis and is free to rotate around it. Sealing is assured by pressure & spring energized seats. For small sizes, the ball is supported by a trunnion, while

Floating ball valves, construction to ASME B16.34 – ASME VIII Div.II, 2 piece bolted body, split body,side entry, flanged RF/RTJ to ANSI B16.5, face to face to ANSIB16.10, full/reduced bore, ISO (5211) top work standardized for actuation, metal seated (ball & seats with Tungsten or Chromium Carbides

The Top Entry ball valve design is characterized by one-piece body construction with top access to all internal components. Top Entry Ball Valves are the preferable solution when it is required to perform in line maintenance and when the reduction of possible leakage path is mandatory. The body can

The precision-made Cryogenic Bolted Gland Integral Ball Valve Double Block & Bleed utilising floating soft seat design with extended bolted gland isolation valves featuring a lipseal and a compact unit size with fewer potential leak paths. Available in a wide range of different materials to suit var

Block & Bleed, Ball Needle or Double Block and Bleed, Ball Needle Ball configurations, bar stock manifold with multiple Flange by Screw connection options, utilising soft seats, with flange to body connection for superior, bubble tight sealing capabilities at both high pressures and temperatures. Ut

The precision-made bolted gland Integral Ball Valve Double Block & Bleed utilising floating soft seat design with bolted gland isolation valves featuring a lipseal and a compact unit size with fewer potential leak paths. Available in a wide range of different materials to suit various applications.

The Substar Single Isolate needle valve is PR2 qualified and hyperbarically tested. This Subsea valve range is designed for superb sealing for up to a depth of 10,000ft.

Double Block and Bleed Needle Needle Needle configuration monoflange valve with flanged inlet and outlet and threaded vent, utilising metal to metal seat and bonnet to body connection for superior, bubble tight sealing capabilities at both extreme pressures and temperatures.

Double Block and Bleed, Ball Needle Ball configuration, trunnion mounted valve manifold utilising soft and metal to metal seating, using the latest in piston seat design, with flange to body connection for superior, bubble tight sealing capabilities at both high pressures and temperatures.

The Check valve type is offered by Alco on most of the DBB valves. The purpose is to prevent bi-directional flow on valves that require flow in only one direction. The CV-B type is offered on sizes from 38mm bore up to 50mm bore and cover pressures up to ASME class 2500.

Model A11C is the cryogenic execution of Valland’s trunnion mounted ball valve. The design principle is the same as the standard A11 — trunnion-supported ball with floating self-relieving or double piston effect seats — adapted for low-temperature service: materials are restricted to grades with pro

Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, chemical injection and sampling for smaller sizes.

The double expanding gate valve uses a two-piece gate-and-segment assembly: at full closure (and full opening) the two halves are mechanically wedged apart, pressing both seats against the body with a positive mechanical force that does not depend on line pressure. The result is a bubble-tight seal

The slab gate valve (model B11) uses a single-piece gate with a full circular bore, running between two floating, spring-loaded metal-to-metal seats. Line pressure pushes the gate against the downstream seat, providing the seal; in open position the conduit is completely unobstructed, allowing piggi

2/ 3 pieces side entry bolted body design. The ball of trunnion mounted configuration is supported by bearing plates hold by the end adaptors. In such a way the pressure loads are transferred to the valve body granting a smooth rotation of the ball with low torque levels and reduced seat seal wear.

Starline manufactures a complete line of SINGLE and DOUBLE BLOCK & BLEED ball valves. Our SBB/DBB ball valves are available in an extensive range of designs, materials, sizes and pressure classes and are in full conformance with API, EEMUA and NACE specifications. Starline uses only high-quality I

In addition to industry-leading compact critical service API 6A valve products within the upstream oil and gas market, CORTEC offers an expanded valve range that is well-suited to various energy industry applications. We design and manufacture valve products under API 6A and 6D licenses. CORTEC prov

Compact Ball Valves are designed for high pressure isolation and offer considerable space and weight savings when compared to traditional ANSI and API class valves. CORTEC Compact Ball Valves are available in a range of bore sizes and working pressures. CORTEC Compact Ball Valves are designed to pr

The standard ball valve is designed for applications with filtered and treated gases, for moderate minimum and maximum temperatures. This valve configuration is the most competitive in terms of price and lead time. Depending on pressure, size, and service, a floating or trunnion-mounted version is a

The standard trunnion-mounted top-entry ball valve is designed for filtered and treated gas applications and for moderate minimum and maximum temperatures. This valve configuration is the most competitive in terms of price and lead time.