An 8" wet barrel fire hydrant with four 3" storz outlets, including a ZF-15 flood preventing device, polyester coated barrel, and ZF-31 fire hydrant.

A fire hydrant with a 3" flanged inlet and two 2" storz outlets, designed for standard working pressure up to 16 BAR, suitable for drinking water and UV proof.

A fire hydrant with a 6" flanged inlet and two 3" storz outlets, designed for standard working pressure up to 16 BAR, suitable for drinking water and UV proof.

A fire hydrant featuring a 4" flanged inlet and two 3" storz outlets, designed for standard working pressure up to 16 BAR, suitable for drinking water and UV proof.

Butterfly valves are used in drinking water networks and water supply lines. Suitable for underground and surface installation. A rubber that provides sealing could be replaced without disassembling other parts. It can also be used with reducer and variousactuators. Butterfly valves are used in to r

Design Casted or forged body and bonnet Bolted bonnet (BB) Rising stem (RS), outside screw and yoke (OS&Y) Parabolic or perforated plug Seats are integral or welded on

Bonney Forge cryogenic valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded join

Bonney Forge is a leading globe valves manufacturer which are used for flow regulation, frequent operation, increased flow resistance, or for positive shut off when closed. Globe valves are closing-down valves in which the closure member is moved squarely on and off the seat. By this mode of disc tr

Bonney Forge is a leading gate valves manufacturer which are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a t

SIDE-ENTRY

Gate Valve (ANSI) is the preferred type of sliding shut-off valve for reliable isolation and minimum pressure loss in process pipelines. EMS Valve’s engineering approach combines durability, safety and ease of maintenance.

PN16 lug type butterfly valve with NBR seat and A-316 stainless steel disc. Made of ductile GGG40 cast iron with RAL5013 epoxy paint coating. The valve is suitable for shutting off the flow of a fluid partially or completely. It withstands a maximum working pressure of 16 bar (250 psi) and can withs

Check valves prevent flow reversal automatically, without external actuation. Valland manufactures two families: the swing check valve (model C11), with a hinged disc in a single-piece bolted-bonnet body, available with renewable or fixed seats, soft sealing or metal-to-metal, and a lockable disc op

FEATURE 1/8″~2″ (DN6~DN50) W.P. : 6000 / 10000 PSI W.T. : -20°C~200°C (-4°F~392°F) Thread type : ASME B1.20.1 (NPT) DIN 2999 & BS 21 ISO 7-1 & EN 10226

* Hydrogen service * Steam Jacketed valves * NACE Application * Under ground installations Size Range :- 15mm to 900mm (1/2" to 36") Pressure Class Rating – 150# to 1500" Wrench/Gear/Electrical/Pneumatic/Gas Operated valves Design as per API 6D, API 599, BS 5353 Standard Valves Patterns : Short, Ve

Fluids used • Steam • Hot Oil • Water, hot water, hot water • Compressed air, LPG • Fuel oil • Heat transfer oils • Chemicals etc. fluids Advantages • Does not contain asbestos • Provides energy savings • Does not require continuous maintenance • Does not leak into the atmo

In your industrial pipelines, Globe Valve (DIN) is a long-life solution, compliant with DIN/EN standards, for precise flow control and reliable shut-off. Thanks to its linear-motion disc, it offers high-quality modulation and, with appropriate leakage classes, helps reduce energy losses.

In your industrial processes, Globe Valve (ANSI) is one of the most reliable solutions for precise flow control and pressure control. Thanks to its linear-motion disc and seating design, it provides high tightness and fine modulation performance.

Gate Valve (DIN) is a type of sliding valve that provides reliable isolation and minimum pressure loss in process pipelines. EMS Valve’s engineering approach in line with DIN/EN standards combines durability, safety and ease of maintenance.

Wafer type butterfly valve with universal flange, chrome-plated ductile cast iron disc and rigid EPDM seat. Manufactured in cast iron with RAL5013 epoxy paint coating and flange in accordance with ANSI B16.5 class 125/150 and UNE-EN-1092 (PN10/16). The butterfly valve is used to partially or complet