The CaptiveAire Pollution Control Unit, PCU Series, is designed specifically for the removal of grease particles and abatement of smoke from the air stream of commercial kitchen exhaust systems. The unit, if ordered with the optional odor control section, will reduce odors from the air stream. The P

Remove grease, smoke and odors from the kitchen exhaust airstream

UL Listed – Halton introduces a first of its kind, modular pollution control system that can be designed based on the projected grease loading and the critical nature of odor mitigation. You have the ability to determine the appropriate technology for the application. Whether an ELF unit with Extend

The Aquamatic Ecology Unit is designed specifically for the removal of smoke and grease particles from the air stream of commercial kitchen exhaust systems and to eliminate or reduce odor to an acceptable level if equipped with the optional odor control section. The AM-PCU is designed for use with a

The Molitron ENVIRO-PAK FILTER ASSEMBLY (EPFA) is 18-gauge, type 304 stainless steel enclosure fitted with top, bottom, and end channels for holding in place pre-filters and MERV 14 or higher commercial grease filter media for removing odor, smoke, and grease vapors from kitchen exhaust air.

Single and Double-Wall Pressure Industrial Chimney for Heating Appliances, Boiler Breeching, Generator and Fume Exhaust and other applications as defined by standard NFPA 211.

Natural Gas, Gasoline, Diesel Engines and Turbines.

Double Wall Grease duct is ideal for use in kitchen ventilation applications where reduced clearance or zero-inch clearance to combustibles is needed. Grease duct is ETL listed to mastandard UL-1978 and UL Standard 2221 and rated for continuous operation at 500° F and intermittent operation at 2000°

Complete hood and filter wash system technology

Double Wall Kitchen Exhaust Vent - 4" Ceramic Insulated Metal-Fab grease duct products are manufactured in a strictly controlled environment that enhances product precision reliability and safety. 4G grease duct systems are tested and listed to UL 1978 and UL 2221. The design incorporates an innov

Single Wall Kitchen Exhaust Vent Metal-Fab grease duct products are manufactured in a strictly controlled environment that enhances product precision reliability and safety. All models are tested and listed to UL 1978. The design incorporates an innovative flanged design for easy assembly and seal

Grease Duct is factory built, single wall construction made from stainless steel. Duct diameters range from 5" to 36", with multiple lengths and accessories available. Ideal for use in kitchen ventilation applications where clearance to combustibles and temperature retention in the duct is not a fac

Duravents' Factory-Built, UL-Listed Prefab Grease Duct is designed for efficiency, safety, cost savings, and compliance. It provides a plug-and-play alternative to traditional welded steel duct systems.

DE-61 is the solution for clear heights from a minimum of 330 cm. This design features less columns in the entrance area for higher comfort while entering the system and opening car doors. The system has lifting platforms on the upper level and sliding platforms on the lower level with one empty sp

DE-40 is our comfortable and simple solution for Indoor use to double the number of parking spaces. The lower vehicle is directly parked on the ground. Flat platforms as standard equipment for high comfort when entering and walking. The lower vehicle on the ground must be driven out before the pla

The SkyVue 8 LIDAR ceilometer measures cloud base heights and vertical visibility for meteorological and aviation applications. Using LIDAR (LIght Detection And Ranging) technology, the ceilometer transmits fast, low-power laser pulses (not harmful to eyes) into the atmosphere and detects backscatte

High Capacity Swing Door Glassware Washers The LAB 660 and LAB 680 are high capacity frontal loading glassware washers designed to meet the needs of medium and large facilities, with the capacity of cleaning bottles for up to 100 lt / 22 Gal US. Electrical or steam heated, the LAB 660 is capable of

ModuleGuard-VD T2, available in T2 grades I, III and IV, is the modular vault door solution to meet customer needs and required dimensions. The combination of lightweight, modular and high performance makes ModuleGuard-VD T2 range of vault doors unique. The vault door solution provides burglary-res

DE-58 is a great solution for outdoor use, to double the number of parking spaces. Offset columns provide higher user comfort while opening car doors. The parking spaces below are invisible when the system is lowered. Moreover, vehicles are safely parked and protected against climatic influences,

DE-37 is the perfect solution for low ceiling heights of 295 cm. The platforms has a minor inclination. A simple and smart solution to double your parking spaces in your garage. Our platforms are flat and large for easy driving and walking (basic equipment). Available as a single unit for 2 cars a

NTBMS Module Platform is an e-mobility ready to use design and complete safety solution for Battery Management Systems. It is constructed with a modular approach: A Battery Management System (BMS) control application board and additional modules for distributed HV applications. The NTBMS Module Pla

The Extech RPM33 provides both contact (2 to 19,999 rpm) and non-contact (2 to 99,999 rpm) revolutions per minute measurements for enhanced versatility. Safely record laser-guided non-contact RPM measurements from up to 500 mm (1.6 feet) away. The RPM33 displays on the large five-digit backlit LCD.

Ultrasonic Treatment Solution The US 100 XL series of independent and automatic ultrasonic cleaning systems for the treatment of reusable medical devices and rigid endoscopes. Ideally suited to busy departments’ needs, the instrument can be easily installed in pre-treatment areas. Baskets can be loa