Maretron's outdoor weather station measures wind speed and direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed using ultrasonic sensors, which means there are no moving parts to wear out or to get caught in the rigging. The WSO200 accurately mea

Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000® network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range o

Maretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible displays. With the appropriate t

Maretron's FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy. In fact, the accuracy of the FFM100 is nea

FURUNO FAR-30x5 Series Chart Radar offers reliable situational awareness and navigation safety through greatly enhanced target detection

When a vessel moves through the water, acoustic noise is created and is known as a boundary layer. This noise layer can cause errors with acoustic devices. By measuring speed through water (STW) farther away from the keel, the DS-85 penetrates through this noise and boundary layer resulting in a mor

Daniamant is proud to introduce the ODEO Distress Flare as the next generation of Electronic Visual Distress Signal Device (eVDSD). As the world starts to embrace LED technology as an alternative to traditional pyrotechnic flares Daniamant have built on the ground breaking ODEO Flare design and impr

The FAR-2xx8 series is designed to provide clearer and more accurate Radar images of the surroundings, while increasing reliability and decreasing overall cost of ownership with easy maintenance. Signals are safely transported though the Ethernet network between the antenna and below deck processin

* Please read and observe the BW-800 Disclaimer avialable in the Download section * Please note that the MED-B & D overrules the DNV Type approval certificate for the BNWAS BW-800 model. BNWAS BW-800 is produced in Denmark to ensure the high level of quality is maintained. BW-800 is designed as a c

All Daniamant Lifebuoy lights are designed to deliver, as a minimum standard, the 2cd output specification and 2 hour duration required by IMO SOLAS regulations. For more detailed product information please select the product brochure detailing all lifebuoy models from the download option.

The Radar Operator Console (ROPKON) provides tools for checking radar status, managing radar videos and displaying integrated test results. ROPKON offers safe navigation with basic navigation tools and support functions required for navigation. Features Navigation safety Radar video Electronic

Long-Lasting LED Backlight Calibrated for ECDIS Wide Dimming Range Approval from Classification Societies The AlphaScreen 26-inch offers durability for use in harsh maritime environments, complying with the conditions for temperature, humidity, and vibration as defined in the IEC 60945 international

The NMEA to Synchro Converter is capable of converting serial heading data to synchro signals with ratios between 1:1 and 360:1. Medium to high power synchro signals can be generated when it is connected with a gyro or electronic compass- useful and cost-effective solution for retrofits projects, e

All Daniamant Lifejacket lights are designed to deliver, as a minimum standard, the 0.75cd output specification and 8 hour duration required by IMO SOLAS regulations. WR3 is the recessed version of the Dan W3. This light has a special fitting clip design for attachment to a lifejacket so that only t

The Dan W3 Polar is designed and developed to withstand the harsh maritime environment and type approved for temperature down to -52 degree Celsius. This makes the Dan W3 Polar optimal for use on any expedition cruises or commercial Deepsea sailing in arctic or antarctica waters. It is recommended t

All Daniamant Lifejacket lights are designed to deliver, as a minimum standard, the 0.75cd output specification and 8 hour duration required by IMO SOLAS regulations. This new, low profile light is a single compact flashing unit. The light is emitted through a ultra low profile dome, making the light

All Daniamant Lifebuoy lights are designed to deliver, as a minimum standard, the 2cd output specification and 2 hour duration required by IMO SOLAS. The L90 uses five alkaline batteries, offering a life of one year. Robust and reliable, the L90 is automatically activated via a mercury switch after

The SenzTx is a compact and robust O2 transmitter that utilises zirconia or electrochemical technology to give a reliable measurement of oxygen concentration. The zirconia sensor offers fast response time and a long service life with virtually no drift, whilst the electrochemical sensor allows measu

Control panel for supervision and monitoring of fire detection systems. Mounting in the cabinet front or externally (IP22). Graphical colour display. Visual and audible indicators.

Maretron's GPS200 is a state-of-the-art 99 channel GPS/GLONASS antenna and receiver capable of providing ten position fixes per second, accurate boat speed ten times per second, and precision time once per second. An additional benefit of the GPS200 is that it broadcasts precision magnetic variation

* TLM150 requires configuration. (Maretron DSM250, DSM410, USB100, or IPG100 needed to configure) Link to knowledge base and frequently asked questions Is this the correct tank monitor for my application? Follow this Link for a Knowledge Base Article describing which product to use for your partic

AMI-SIL® AS and CAS hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). The following AMI-SIL AS and CAS hot work fabrics have been tested and rated to the ANSI/FM 4950 Standard which is now required by the NFPA 51B. AS1800G & AS3600 meet USCG1

AMI-GUARD® is AMI’s line of high performance finished hot work products. AMI-GUARD® welding curtains are sewn with PTFE-coated fiberglass thread, FM Approved, and meet the requirements of NFPA 51B. All AMI-GUARD® fabricated welding curtains are available in standard or custom sizes and with or witho

VEXTRA® (SGLV) is a heavy duty, heavy weight fiberglass treated with vermiculite and coated on one side with a silicone rubber compound. It is ideal for both indoor and outdoor hot work applications. The vermiculite coating is inorganic, chemically inert, noncombustible and odorless. AMI’s VEXTRA p

VEXTRA® (GLV) is a heavy duty, heavy weight, fiberglass fabric coated with vermiculite. These products have been tested and FM approved as a welding curtain. The vermiculite coating acts as an armor—it is inorganic, chemically inert, noncombustible, odorless and provides 50% more protection from dir