Our transmission chains are ideal for conveyors and agricultural machines, offering high resistance to wear. Made of high-strength steel, they are specially heat-treated with double hardness treatment to increase interlink radial hardness by 15% to 20%. The chain dimensions comply with NFE 26011 an

Long-Lasting LED Backlight Calibrated for ECDIS Wide Dimming Range Approval from Classification Societies The AlphaScreen 26-inch offers durability for use in harsh maritime environments, complying with the conditions for temperature, humidity, and vibration as defined in the IEC 60945 international

Bubble CPAP also known as Neonatal CPAP, is a unique bubble generating system that provides consistent and accurate delivery of CPAP to neonatal patients. Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100% Highly calibrated blender ensures accurate % of oxygen delivered. LED

The SkyVue™PRO LIDAR Ceilometer measures cloud height and vertical visibility for meteorological and aviation applications and is ideal for long-term research applications where a high level of detail is required. Its robust construction is ideal for long-term installation, as it requires minimal m

Maretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible displays. With the appropriate t

This photovoltaic reference cell offers an economical but robust and reliable solution for measuring solar irradiance levels, particularly for monitoring photovoltaic systems. The design of these silicon solar irradiation sensors, which corresponds to that of a photovoltaic module, makes these senso

This photovoltaic reference cell offers an economical but robust and reliable solution for measuring solar irradiance levels, particularly for monitoring photovoltaic systems. The design of these silicon solar irradiation sensors, which corresponds to that of a photovoltaic module, makes these senso

Special calibrated rope for cutting marble and granite

CPC in 19” rack design available as CPC 5421 CEN with a D50 of 10 nm for full compliance with the EN16976 for 24/7 real-time monitoring of UFP in ambient air, or the standard calibrated model CPC 5421 with a D50 of 4 nm.

The CHP1 pyrheliometer is the most commonly used radiometer for the measurement of direct normal irradiance (DNI) and offers high accuracy and reliability. CHP1 fully complies with the most current ISO and WMO performance criteria for First Class Normal Incidence Pyrheliometer. Every CHP1 is calib

The ASME PTC-6 flow nozzle is a specialized differential pressure device designed to deliver the highest accuracy and repeatability required for steam turbine efficiency testing under the ASME PTC-6 Performance Test Code. Primary Flow Signal supplies PTC-6 nozzles as complete assemblies, including i

* TLM150 requires configuration. (Maretron DSM250, DSM410, USB100, or IPG100 needed to configure) Link to knowledge base and frequently asked questions Is this the correct tank monitor for my application? Follow this Link for a Knowledge Base Article describing which product to use for your partic

The FW and FWC Valves are small, low-cost relief valves suitable for static over-pressure protection. Type FWC incorporates a calibrated adjusting screw for occasional changes in pressure setting without the use of a pressure gauge. Bronze bodies with male inlet and female outlet, silicone seats and

DonadonSDD’s SCD forward acting rupture discs are vital safety devices that prevent sudden pressure variations from damaging industrial plants. Forward acting rupture discs have a concave disc camber that remains unaltered under operating pressure until set pressure is reached and this can ensure lo

DonadonSDD’s KRD reverse acting rupture discs are critical safety devices that protect your industrial plant by preventing sudden pressure build-ups. Reverse acting rupture discs have a convex disc camber that remains unaltered under operating pressure until reverse pressure is reached and this can

Four Bolt Gauge for Domestic Tanks, DOT Cylinders and Motor Fuel Application 6200 Series gauges are widely used to measure liquid levels of LP/propane, fuels, hydraulic fluids, refrigerants, lube oils and cryogenic products. Models 6281 and 6284 Junior gauges used on above ground ASME storage tan

TUNPROTEC® Model C-A-80-80-NF-NT Zone Control Valve assembly is a factory-assembled and -tested fire zone control valve designed for implementation in TUNPROTEC systems. As fire zone control valve, the Tunprotec Model C-A-80-80-NF-NT Zone Control Valve has been designed to hydraulically control the

Our ductless fume hoods allow manipulating chemicals safely because the vapors are extracted and purified when they go through the activated carbon filter. They are compliant to the standard NF X 15-211. This mini-fume hood has been designed especially for the confined spaces.

Drain valve made of CW617 forged brass (EU standard), 100% chrome plated - Design, manufacturing and control according to NF079 standard - Drain 1/4 - Full bore - Peak temperature 110°C (operating temperature : -5°C to +90°C) - Threads ISO 228-1 - Double EPDM o-ring - Anti blow-out stem - Stainless

Matest High Stability Compression Machines are engineered to comply with the most demanding international standards, including EN 12390-4, BS 1881:115, DIN 51220, UNI 6686-3, NF P18-411, UNE 83304, ASTM C39, and AASHTO T22. Their four-column prestressed frame ensures outstanding rigidity and unifor

Vertical GRP tanks with flat bottom are a preferred solution for overhead storage facilities because of their low cost and ease of installation directly on a concrete slab, without the need for additional operations. Constructed from GRP or GRP with a thermoplastic liner, these tanks are sized in ac

At CPE, we design and manufacture a comprehensive range of pressure vessels for a wide variety of market sectors and applications. We work to both domestic and international design codes and directives, and can accommodate project-specific specifications to ensure full compliance with all relevant r

A vessel designed to withstand high pressure, used in various chemical processes.

• It is manufactured vertically or horizontally according to model. • Tank is designed with cylindrical section and designed with the most durable and safest combination. • Our tanks use special high strength, fine grained, normalized "P" series pressure vessel steel in accordance with EN 10028-3. T