nice Neötech Medical Systems Pvt. Ltd.

720 ml compressed volume for Pediatric / Adult patients. Medical grade rigid polysulfon material ensures to withstand higher temperatures of hot water and multiple use. Aluminium base plate ensures to transfer and hold the heat inside the chamber. Removable aluminium base plate with O-ring easy to clean and multiple use. Optimal guided flow circulation within the chamber. Lower water level needed and larger heater contact surface to reduce required heating time. Standard complied 22mm male port for inlet and outlet gas hose connectors. Isolated water inlet port makes it easy to refill water and minimizes the work load of removing chamber frequently. Float seal mechanism to prevent the overflow of water from the chamber. Highly legible water line in chamber makes it easily visible from all angles. Flow resistance, compliance and leakage conform to ISO 5356 for connectors. Designed to withstand sterilization process enabling contamination free multiple use. Biocompatible for breathing gas pathway ensures to reduce the risk of contamination and leaching.

Bubble CPAP also known as Neonatal CPAP, is a unique bubble generating system that provides consistent and accurate delivery of CPAP to neonatal patients. Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100% Highly calibrated blender ensures accurate % of oxygen delivered. LED indicator to display the level of PEEP set to deliver CPAP to neonatal patients. High PEEP alarm and Low PEEP alarm for indication of PEEP levels. Low Air / Oxygen alarm indications for indication of low input pressure. Power failure alarm to alert the user or clinician. Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient. Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O. Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device. Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water. Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient. Invasive and Non-invasive mode of operation supports neonatal patients based on their requirements and comfort. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing. Strong Aluminium stand with dovetail grooving for easy fixing of humidifier and accessories Disposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient. Different types of patient interfaces like CPAP Nasal prongs, Nasal mask, Nasal T bar prongs & Nasal cannula are available to support the patient based upon their convenient and comfort.

9 High-power Blue LED provides coverage of the bed area for effective Phototherapy treatment 3 White LED lights for observing the patient during treatment No infrared rays ensure minimal water loss Adjustable Height – Conveniently allows you to control irradiance levels on the neonate and different types of cradles. Convenient Tilting of the Source Unit, Height Adjustment with a Single hand, and Castors with elegant maneuvering help place the system in different positions at the user’s convenience. Treatment Timer ensures auto cut-off when the set time is reached Lamp usage hour monitor, Lamp replacement alert ensures less downtime for service. Lamp usage hours greater than 20,000 hours ensure no need for frequent change of lamp. Strong aluminium stand ensures more support and holds during movement

24 High-power Blue LED provides coverage of the bed area for effective Phototherapy treatment 3 White LED lights for observing the patient during treatment No infrared rays ensure that the water loss is minimized Adjustable Height – Conveniently allows you to control irradiance levels on the neonate and different types of cradles. Convenient Tilting of the Source Unit, Height Adjustment with a Single hand, and Castors with elegant maneuvering help place the system in different positions at the user’s convenience. Treatment Timer ensures auto cut-off when the set time elapses Lamp usage hour monitor, Lamp replacement alert ensures less downtime for service. Lamp usage hours withstand at least 20,000 hours, ensuring no need for frequent lamp changes.

Infant Resuscitator will safely inflate the baby’s lungs and provide optimum oxygenation by delivering consistent PIP with each breath avoiding the risks associated with under or over inflation at uncontrolled pressures. Accept and deliver oxygen concentrations from 21% to 100% coming from a flow meter or a blender. Disposable t-piece patient circuit with PEEP knob ensures proper setting of PEEP based on the patient’s requirement. The patient T-Piece can connect to neonatal masks or endotracheal tubes. Helps to establish and maintain Functional Residual Capacity (FRC) by providing a consistent PEEP throughout the resuscitation process. An accurate manometer provides constant reassurance of mask seal and deliver PIP and PEEP. Consistent PEEP can be delivered to assist with breathing during transport or ventilator circuit change. Small in Size, Less Weight and innovative technology incorporated into a compact design. Different size of face mask which provides flexible in usage for different babies.

Respiratory Humidifier is designed for use in hospital environment wherever medical gas is being supplied to patients. nice 8050 Respiratory humidifier (Medical Humidifier) incorporates latest technology that provides Physiological level of humidity at body temperature. The nice 8050 advanced microprocessor controls & delivers precise, reliable performance in humidifying the respiratory medical gas before delivered to the patient and ensures 0% water condensation in any breathing circuit. Capable of operating in either invasive or non-invasive control mode with flow detection. The nice 8050 features dual servo control feedback humidifier system incorporates to constant monitoring and control chamber and proximal temperatures in the airway line. As a result high temperature gases cannot exist anywhere in the system. When use a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized. Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8050 will alert at variations of set limit temperature Vs actual. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing. The design of nice 8050 Servo Humidifier makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator and High Flow Oxygen Therapy for Adult, Pediatric & Neonatal care for both invasive and non-invasive application. The servo controlled Humidifier accommodates both high and low flow ventilation therapies, as well as heated and non-heated wire breathing system. An advanced microprocessor controller assures the control of the system. The system responds immediately to any change in settings, and constant self-diagnostic verify proper operation every second of use. Compatible for use with both disposable and reusable humidification chambers. Add water alarm arises when water level below the required level in the chamber. Non-interchangeable connectors with different colour code provided for temperature probe and heater wire adapter. Highly accurate temperature probe that measures the temperature at chamber side and at the end of breathing circuit and provides servo controlled feedback to the humidifier.

A microprocessor-controlled Infant warming system Modes of Operation: Servo Skin, Servo Air* Safe, Pre-warm, and Manual (*will incur additional charges) TFT touch display and comprehensive alarms Thermistor-based Temperature Sensor for accurate temperature measurement i-sense technology detects the detachment of the skin probe and decreases the temperature gradually to protect the baby from Hyperthermia Quartz heater with parabolic reflector to provide heat uniformly in the entire bed Memory Backup automatically restores the set temperature and control mode in the event of a power failure. It helps to reduce the attention failure of users APGAR Timer available up to 1-59 minutes LED observation lamp to facilitate the Doctor/Physician to observe the baby during treatment The baby bed is jerk-free and tiltable on both sides for Trendelenburg and Fowler’s positions Easily removable and Unbreakable hinge with acrylic/polycarbonate (PC) side panels to clean for subsequent usages The Heater Module easily pivots 90 degrees in either direction to facilitate other procedures, such as X-ray, without disturbing the baby. The heater can be cut off during pivoting (optional feature)

The nice 3030 Infant incubator is built to Embody precision, reliability and convenience Micro-processor controlled with simultaneous display of Skin, Air and Set Temperatures Thermistor based Temperature Sensor for accurate temperature measurement Memory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of users The centrifugal blower operation ensures intake fresh air for the infant, and minimizes the CO2 level inside the hood, always The unit has a built-in Humidity Chamber (Conventional) The baby bed is tiltable at both sides for Trendelenburg and Fowler’s position The elbow operated ports allows easy access and eliminates cross infections Include Built-in IV Stand

The nice 3010 Infant incubator is built to embody precision, reliability, and convenience Micro-processor controlled with simultaneous display of Skin, Air, and Set Temperatures Thermistor-based Temperature Sensor for accurate temperature measurement Memory Backup restores the set temperature and control mode automatically in the event of power failure. It helps to reduce the attention failure of users The centrifugal blower operation ensures intake of fresh air for the infant, and minimizes the CO2 level inside the hood, always The withdrawable Mattress tray gives unimpeded access to the newborn The unit has a servo-controlled Humidity feature and an integrated O2 Flow Meter The baby bed is tiltable at both sides, head up and down, with externally operated Trendelenburg and Fowler’s position The elbow-operated ports allow easy access and eliminate cross-infections Include Built-in Observation Light, IV Stand, and Monitor Shelf