The Extech VT30 is a voltage, continuity and phase tester, featuring a built-in flashlight and backlit digital display with bar graph. This rugged tester is protected by a double molded IP64 housing and offers polarity detection with LEDs for positive and negative DC as well as a CAT III 600 Volt /

The Extech 381676A is a Pen Styled Multimeter with a Built in NCV detector. The 381676A features nine functions including AC/DC voltage to 600V, AC/DC Current to 200mA, Resistance, as well as Logic, Diode and Continuity tests. This meter has an easy to use rotary dial with alligator clips for one ha

Circuit and wiring issues can introduce shock hazards and compromise performance of machinery and equipment. The CT70 is a GFCI and AC circuit analyzer which covers outlet load handling and outlet tester functions. AC load tester functions cover selectable loads of 12, 15, and 20 Amps; loaded and un

Absolute, relative, or differential pressure

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and

The T 2000 test set conforms to the following standards: - Electromagnetic Compatibility: Directive no. 2004/108/EC. Applicable Standard: EN 61326-1 + A1 + A2. - Low Voltage Directive: Directive n. 2006/95/EC. Applicable standard for a class I instrument, pollution degree 2, installation category

The T 3000 primary current injection test set conforms to the following standards: - Electromagnetic Compatibility: Directive no. 2004/108/EC. Applicable Standard: EN 61326-1 + A1 + A2 - Low Voltage Directive: Directive n. 2006/95/EC. Applicable standards for a class I instrument, pollution degree

Extech's MS420 20 MHz 2-Channel Digital Oscilloscope offers a range of capabilities for effective troubleshooting of electronics and electronically controlled electrical systems. With 20 MHz bandwidth and conveniences like auto-set which optimizes the position, range, time base, and triggering to as

The AQUILA Partial Discharge Acquisition Unit complies with IEC 60270, IEC 61326-1, and IEC 61010-1 standards.

The AQUILA Partial Discharge Acquisition Unit complies with IEC 60270, IEC 61326-1, and IEC 61010-1 standards.

The TD 1000 PLUS conforms to the following standards: - Electromagnetic Compatibility: - Directive no. 2004/108/EC - Applicable Standard: EN 61326-1 + A1 + A2 - Emission Standards: - EN 61000-3-2 - EN 61000-3-3 - CISPR16 (EN 55011 class A) - Immunity Standards: - EN 61000-4-

Design Casted or forged body and bonnet Bolted bonnet (BB) Rising stem (RS), outside screw and yoke (OS&Y) Parabolic or perforated plug Seats are integral or welded on

JSB Series V-segment valve is the segment ball with V-notch design for both regulating and shut-off services. The high valve capacity with optimum flow characteristics provides the ideal solution in flow control.

Main valve uses globe design for superior control characteristic. CanLeaf Top and Bottom seat rings are used to guide the stem and diaphragm assembly for extended life time and stability. CanLeaf High strength ductile iron body used for lowering the weight and improving long term durability. Stai

The CaptiveAire Pollution Control Unit, PCU Series, is designed specifically for the removal of grease particles and abatement of smoke from the air stream of commercial kitchen exhaust systems. The unit, if ordered with the optional odor control section, will reduce odors from the air stream. The P

The E-Series motor controller is a compact, efficient and ISO26262 ready inverter. The product is a perfect fit for multiple HV applications such as passenger car, eBus, commercial vehicles, marine or hybrid systems. It is capable of implementing the most advanced control techniques including NX´s V

Remove grease, smoke and odors from the kitchen exhaust airstream

Aeromaoz’s control boxes represent the pinnacle of avionics integration, combining sophisticated electronics with intuitive user interfaces. These versatile units feature: Illuminated front panels for clear visibility in all lighting conditions Robust electromechanical components for reliable opera

Each control system is expertly engineered, assuring reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions. BOP closing units also known as Accumulator Units range in a variety of sizes. These units come standard with air/electric over hydraulic

TUNPROTEC® Model C-A-80-80-NF-NT Zone Control Valve assembly is a factory-assembled and -tested fire zone control valve designed for implementation in TUNPROTEC systems. As fire zone control valve, the Tunprotec Model C-A-80-80-NF-NT Zone Control Valve has been designed to hydraulically control the

TUNPROTEC® Model C-A-80-80 Zone Control Valve assembly is a factory-assembled and -tested fire zone control valve designed for implementation in TUNPROTEC systems. As fire zone control valve, the Tunprotec Model C-A-80-80 Zone Control Valve has been designed to hydraulically control the flow of wate

TUNPROTEC® Model C-M-80-80 Zone Control Valve assembly is a factory-assembled and -tested fire zone control valve designed for implementation in TUNPROTEC systems. As fire zone control valve, the Tunprotec Model C-M-80-80 Zone Control Valve has been designed to hydraulically control the flow of wate

Windlass BOP Control Systems meet or exceed the most stringent quality standards including American Petroleum Institute specifications API 16D, RP16E & RP53 to assure safe and reliable operation under critical conditions. We provide BOP Control Systems for both onshore and offshore applications worl

Control panel for supervision and monitoring of fire detection systems. Mounting in the cabinet front or externally (IP22). Graphical colour display. Visual and audible indicators.