The Extech 480403 Motor Rotation and 3-Phase Tester has a 40 Volt to 600 Volt rated range for testing phase orientation of 3-phase power sources over a 2 Hz to 400 Hz frequency range. LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the phases is live. In addition

The MA120 is a 200 Amp AC/DC mini clamp meter with built-in AC voltage detector and built in LED flashlight. The meter measures Frequency up to 1 kHz with 0.01Hz resolution, auto ranges with auto power off and data hold functions. Complete with a year warranty, 2 AAA batteries and soft case.

The Extech RPM33 provides both contact (2 to 19,999 rpm) and non-contact (2 to 99,999 rpm) revolutions per minute measurements for enhanced versatility. Safely record laser-guided non-contact RPM measurements from up to 500 mm (1.6 feet) away. The RPM33 displays on the large five-digit backlit LCD.

Extech's 461920 is a tachometer for RPM measurements. Make safe, non-contact RPM measurements (2 to 99,999 RPM) of rotating objects by pointing the integral laser (1.6-ft. target distance) at the reflective tape placed on the object to be measured. Complete with 9-Volt battery, reflective tape and u

Absolute, relative, or differential pressure

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and

The SDL800 measures and datalogs vibration using a remote vibration sensor with magnetic adapter on 47.2"(1.2m) cable. It offers a wide frequency range of 10Hz to 1kHz with basic accuracy of ±(5% + 2 digits). Manually store 99 readings or continuously datalog using a SD memory card, which allows use

The T 2000 test set conforms to the following standards: - Electromagnetic Compatibility: Directive no. 2004/108/EC. Applicable Standard: EN 61326-1 + A1 + A2. - Low Voltage Directive: Directive n. 2006/95/EC. Applicable standard for a class I instrument, pollution degree 2, installation category

The T 3000 primary current injection test set conforms to the following standards: - Electromagnetic Compatibility: Directive no. 2004/108/EC. Applicable Standard: EN 61326-1 + A1 + A2 - Low Voltage Directive: Directive n. 2006/95/EC. Applicable standards for a class I instrument, pollution degree

The AQUILA Partial Discharge Acquisition Unit complies with IEC 60270, IEC 61326-1, and IEC 61010-1 standards.

The AQUILA Partial Discharge Acquisition Unit complies with IEC 60270, IEC 61326-1, and IEC 61010-1 standards.

The TD 1000 PLUS conforms to the following standards: - Electromagnetic Compatibility: - Directive no. 2004/108/EC - Applicable Standard: EN 61326-1 + A1 + A2 - Emission Standards: - EN 61000-3-2 - EN 61000-3-3 - CISPR16 (EN 55011 class A) - Immunity Standards: - EN 61000-4-

Design Casted or forged body and bonnet Bolted bonnet (BB) Rising stem (RS), outside screw and yoke (OS&Y) Parabolic or perforated plug Seats are integral or welded on

JSB Series V-segment valve is the segment ball with V-notch design for both regulating and shut-off services. The high valve capacity with optimum flow characteristics provides the ideal solution in flow control.

Main valve uses globe design for superior control characteristic. CanLeaf Top and Bottom seat rings are used to guide the stem and diaphragm assembly for extended life time and stability. CanLeaf High strength ductile iron body used for lowering the weight and improving long term durability. Stai

The CaptiveAire Pollution Control Unit, PCU Series, is designed specifically for the removal of grease particles and abatement of smoke from the air stream of commercial kitchen exhaust systems. The unit, if ordered with the optional odor control section, will reduce odors from the air stream. The P

The E-Series motor controller is a compact, efficient and ISO26262 ready inverter. The product is a perfect fit for multiple HV applications such as passenger car, eBus, commercial vehicles, marine or hybrid systems. It is capable of implementing the most advanced control techniques including NX´s V

Remove grease, smoke and odors from the kitchen exhaust airstream

Aeromaoz’s control boxes represent the pinnacle of avionics integration, combining sophisticated electronics with intuitive user interfaces. These versatile units feature: Illuminated front panels for clear visibility in all lighting conditions Robust electromechanical components for reliable opera

TUNPROTEC® Model C-M-80-80 Zone Control Valve assembly is a factory-assembled and -tested fire zone control valve designed for implementation in TUNPROTEC systems. As fire zone control valve, the Tunprotec Model C-M-80-80 Zone Control Valve has been designed to hydraulically control the flow of wate

Each control system is expertly engineered, assuring reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions. BOP closing units also known as Accumulator Units range in a variety of sizes. These units come standard with air/electric over hydraulic

TUNPROTEC® Model C-A-80-80-NF-NT Zone Control Valve assembly is a factory-assembled and -tested fire zone control valve designed for implementation in TUNPROTEC systems. As fire zone control valve, the Tunprotec Model C-A-80-80-NF-NT Zone Control Valve has been designed to hydraulically control the

TUNPROTEC® Model C-A-80-80 Zone Control Valve assembly is a factory-assembled and -tested fire zone control valve designed for implementation in TUNPROTEC systems. As fire zone control valve, the Tunprotec Model C-A-80-80 Zone Control Valve has been designed to hydraulically control the flow of wate

Windlass BOP Control Systems meet or exceed the most stringent quality standards including American Petroleum Institute specifications API 16D, RP16E & RP53 to assure safe and reliable operation under critical conditions. We provide BOP Control Systems for both onshore and offshore applications worl