Design Casted or forged body and bonnet Bolted bonnet (BB) Rising stem (RS), outside screw and yoke (OS&Y) Parabolic or perforated plug Seats are integral or welded on

FEATURE Full port, 2″~24″ (DN50~DN600) W.P. : PN10 / 16 / 25 / 40 Class 150 / 300 / 600 W.T. : -20°C~200°C (-4°F~392°F) Investment casting Blow-out proof stem Anti-static device ISO 5211 Direct mounting pad Metal seat : 2063-MS (option) Flange dimension : ASME B16.5 EN 1092-1 Face to face : ASME B16

2/ 3 pieces side entry bolted body design. The ball of trunnion mounted configuration is supported by bearing plates hold by the end adaptors. In such a way the pressure loads are transferred to the valve body granting a smooth rotation of the ball with low torque levels and reduced seat seal wear.

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

Trunnion mounted ball valves, construction to ASME B16.34-API6D, 2/3 piece bolted body, split body,side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A, f

FULL BORE BALL VALVE FOR GAS - EN 331 - T10G SERIES - ALUMINIUM LEVER HANDLE

PN16 globe valve with bellows and flanges in accordance with EN-1092-1. Made of GS-C25 carbon steel with RAL5013 epoxy paint coating, 2Cr13 Stellite stainless steel seat, A-304 stainless steel bellows and graphite gaskets. The valve withstands a maximum working pressure of 16 bar and an operating t

ate valve with flanges, fixed shaft and EPDM resilient wedge. Made of GGG50 cast iron with RAL5013 epoxy paint coating, resilient cast iron seat + EPDM coating and flanges in accordance with DIN EN-1092-2. The gate valve is used to open or close the flow of fluids and in some cases to regulate the f

Our PREMIUM polypropylene water meter battery is superior to conventional ones. It is weld-free, rust-free, and complies with UNE 53943:2017. One-piece PPR tube , with built-in plastic plate, without welding. Polypropylene pipe circuit according to UNE-EN ISO 15874-1:2004 and UNE-EN ISO 15874-2:2004

Our PREMIUM polypropylene water meter battery is superior to conventional ones. It is weld-free, rust-free, and complies with UNE 53943:2017. One-piece PPR tube , with built-in plastic plate, without welding. Polypropylene pipe circuit according to UNE-EN ISO 15874-1:2004 and UNE-EN ISO 15874-2:200

The Flexalen® PU pre-insulated plastic pipe system complies with several standards and certifications, including EN 15632-1, EN 15632-2, EN 15632-3, EN ISO 15876, EN 253, BRL 5609, BRL K17401, QB 08, and ISO 9001:2015.

Fume cupboard with built-in filtration system, no extraction ducts required. Specially designed for laboratories where flexibility is of the essence, the Green Cycle version with wheels is quite unique in the market. Developed in collaboration with ERLAB, a European leader in air filtration for th

1/2″~3″ (DN15~DN80) W.P. : 200 WOG W.T. : -20°C~200°C (-4°F~392°F) Investment casting Socket weld (option) Thread type : ASME B1.20.1 (NPT) DIN 2999 & BS 21 ISO 7-1 & EN 10226

ventilair duplex two-way vent valve suitable for DN 30/40/50 volume flow 8 l/s, temperature range -20degC to +60degC, with activated carbon filter, polystyrene frost protection cover and rubber connector for the stated dimensions Notes: ventilair duplex two-way vent valves are subjected to regul

PN16 globe valve with flanges in accordance with DIN 2501. Made of GG25 cast iron with RAL5013 epoxy paint coating, A-304 stainless steel seat and graphite gaskets. The valve withstands a maximum working pressure of 16 bar (250 psi) and is suitable for operating temperatures from -20 to 200°C. Model

The Flexalen® Tools product page mentions several standards and certifications: - **EN 15632-1**: European standard for pre-insulated piping systems. - **EN 15632-3:2010+A1:2014**: European standard for pre-insulated piping systems. - **EN ISO 15876-1,2**: International standard for plastic piping

FEATURE L port / T port, 1/4″~2″ (DN8~DN50) W.P. : 1000 WOG (PN63) W.T. : -20°C~200°C (-4°F~392°F) Investment casting Blow-out proof stem Locking device Anti-static device (option) ISO 5211 Mounting pad Thread type : ASME B1.20.1 (NPT) DIN 2999 & BS 21 ISO 7 – 1 & EN 10226

Full port, 1/4″~4″ (DN8~DN100) W.P. : 1/4″~1″ – 2000 WOG (PN150) 1-1/4″~2″ – 1500 WOG (PN100) 2-1/2″~4″ – 1000 WOG (PN63) W.T. : -20°C~200°C (4°F~392°F) Investment casting Blowout proof stem Antistatic device (option) Locking device Tapped & drilled mounting pad (option) TALuft approved (option)

FEATURE 1/4″~2″ (DN8~DN50) W.P. : 800 WOG (PN50) W.T. : -20°C~200°C (-4°F~392°F) Investment casting Thread type : ASME B1.20.1 (NPT) DIN 2999 & BS 21 ISO 7-1 & EN 10226

FEATURE 1/4″~2-1/2″ (DN8~DN65) W.P. : 200 WOG W.T. : -20°C~200°C (-4°F~392°F) Investment casting Rising stem Thread type : ASME B1.20.1 (NPT) DIN 2999 & BS 21 ISO 7-1 & EN 10226

Soundproof, triple layer, push-fit system made of pipes and fittings for soil and waste discharge, at low and high temperatures, both within the building structure (application area code “B”) as well as buried in the ground (application area “BD”). Pipes have a three-layer wall structure with extern

The 30-minute fire resistant safety cabinets are compliant to the standards EN 14470-1 and FM 6050. They allow storing your gas bottles safely, and delaying the spread of the eventual fire in the cabinet, while waiting for rescue intervention.