Lifting stations are specified when the grease separator is installed below the backflow level.

Free-standing grease separator units

ACO LipuSmart products integrate the functions of grease separation, sampling, drainage using a lifting plant and a control system for the general system into one product.

Testing of grease separators according to EN 1825-1 to ensure efficient separation of fats and oils from wastewater.

The Flexible Grease Management Solution

In facilities such as petrol stations, car washes or workshops where water can be contaminated by light mineral liquids, the use of separator systems is required by law. These systems ensure that the water is cleaned in an environmentally friendly manner so that it can be safely discharged into the

Testing of oil separators according to EN 858-1 to ensure effective separation of light liquids from wastewater.

Ideal for facilities handling up to approximately 545 meals per day, this model provides a grease storage capacity of 403 liters and a sludge trap of 709 liters, with a total capacity of 1,956 liters.

Suitable for operations serving up to about 310 meals daily, it offers a grease storage capacity of 178 liters and a sludge trap of 405 liters, totaling 790 liters.

Designed for establishments processing up to approximately 155 meals per day, this model features a grease storage capacity of 103 liters and a sludge trap of 203 liters, with a total capacity of 550 liters.

Preparing food and cleaning cooking utensils and dishes inevitably produces waste water containing fat. This must not be discharged directly into the sewage system or a sewage treatment plant, as the grease can cause problems in the pipes and water treatment. This is where the KLsepa.pop from KLARO

Sofilair HT is a high airflow HEPA filter designed for the high temperature industry especially sterilization tunnels and ovens. The filter media is pleated into uniform and stable pleat packs supported by glass fiber thread separators with high temperature resistance. The filter media is a glass mi

The TATSUNO dispensers of the OCEAN Tower LPG series are used for dispensing liquefied propane butane (LPG) at filling stations for road motor vehicles. They are modern single-sided or double-sided dispensers with one to four dispensing hoses (max. two dispensing hoses on each side of the dispenser)

Air Techniques has been the industry leader for over six decades, empowering dental practices with superior air and evacuation systems. At Air Techniques, we understand how to create an amalgam separator that works in line with your evacuation system and meets all “EPA Dental Rule” requirements. Aca

Systems designed to separate oil and hydrocarbons from surface water runoff, ensuring compliance with environmental regulations. ([aco.co.uk](https://www.aco.co.uk/civils-infrastructure?utm_source=openai))

Designed to remove oil, grease, light petroleum products, and oily-coated solids from wastewater discharges, ensuring compliance with EPA regulations. Suitable for industrial applications like bulk petroleum storage, aircraft fueling, and vehicle maintenance.

DN50-DN2000, • Pressure Class: PN10 / 16 // ANSI 125 / 150, • Body: Epoxy coated GGG50, • Disc: Epoxy coated GGG50 / CF8M / AISI 316, • Seat: EPDM / NBR / Viton, • Operation: Lever / Gearbox // Pneumatic / Electric / Hydraulic Actuator, • According to TS EN 593.

TANGRA HEPA Box is designed for final air filtration in ventilation and air conditioning systems with installation of HEPA filters, class H13 and H14 (EN 1822-1:2019).

The Concept-HL jacking pipe type MV is a wastewater jacking pipe made of filler-free polypropylene according to DIN EN 1852-1, featuring a smooth inner and outer surface, integrated push-fit socket connection with two permanently fixed sealing rings. The Concept-HL range is produced in a green color

The Concept-HL jacking pipe type MRS 2.0 is a wastewater jacking pipe made of filler-free polypropylene according to DIN EN 1852-1 with a material-bonded multi-grid welded joint and short welding time, without an internal weld bead. Fixing the pipes during the cooling phase is not required. The Con

Wafer type butterfly valve with universal flange, chrome-plated ductile cast iron disc and rigid EPDM seat. Manufactured in cast iron with RAL5013 epoxy paint coating and flange in accordance with ANSI B16.5 class 125/150 and UNE-EN-1092 (PN10/16). The butterfly valve is used to partially or complet