SCREENFLEX PVC has been specifically designed to protect people from dangerous radiation and projection from hot metal during welding. SCREENFLEX complies with international standards and regulations for “Health and Safety in Welding” (ISO 25980, EN 1598 in Europe and AWS F2.3 in USA) SCREENFLEX

Nautec-Silencer Every cylinder inspection facility knows the problem, visual and hydrostatic inspections. Cylinders must be drained, with the accompanying assault on ones auditory nerves. With the MicroMaxx filtration system as a base, Nautec has developed and refined an effective noise reduction s

UAC containers for transport of CNG and biogas are equipped with lightweight type IV pressure vessels in fibreglass. Our pressure vessels are designed to optimize gas containment and transportation volume, and offer additional safety, compared to traditional carbon fibre pressure vessels. UAC tran

GREENPUMPS GPCA SS316 centrifugal Magnetic drive Sealless pumps series, are in compliance with ISO5199 / ISO2858 / DIN24256 norms. Are built and designed to reach an high efficiency and a low value of NPSHr. Are available in close coupled configuration with the motor directly coupled to the pump o

ModuleGuard-VD T2, available in T2 grades I, III and IV, is the modular vault door solution to meet customer needs and required dimensions. The combination of lightweight, modular and high performance makes ModuleGuard-VD T2 range of vault doors unique. The vault door solution provides burglary-res

ModuleGuard-SR T2, available in T2 grades I, III and IV, is the modular strong room solution that can be built into your existing structure of building, even where floor load is limited. The combination of lightweight, modular and high performance makes the ModuleGuard-SR T2 range of strong rooms u

SK1203 is a compressed air open circuit breathing apparatus with hood for escape, from all environments potentially dangerous because of the presence of fumes or lack of oxygen. It is designed to create a constant air flow of 15 minutes thanks to a 2 l300 bar cylinder which is directly connected to

Lead-Free Lavatory Mixing Valve With Integral Mounting Feet The model ST70 is an ASSE 1070-certified, lead-free thermostatic tempering valve that protects against dangerously hot water in any commercial sink or lavatory application.

Material Lifting Baskets Material lift baskets are used for lifting heavy, oversized equipment typically by crane or forklift. Material handling can often be a dangerous job. With material baskets from Lakeshore Industrial you can be sure you are safely handling your equipment. Our heavy duty

Amphibious elbow cane. · Can be immersed in water, both in the sea and in the pool. · Includes beach ferrule. Perfect for the beach but use caution in pools as it can be dangerous on slippery surfaces. · Made of aluminum. · Ergonomic grip. · Available in three sizes: - S (pistachio): Grip to

To ensure the safety of people and goods, we have created a safety storage solution for Lithium-ion batteries. Indeed lithium-ion batteries have the particularity to present many risks of which the most known and the most frequent is the thermal runaway which can be due to a rise of temperature of t

Gas cylinder cages for cranes Gas cylinder cages are designed to safely transport cylinders by crane or forklift. Common safety features include fire proof walls and a secure strapping system. Our gas cylinder cages are designed to meet specific OSHA regulations, including five-foot tall firewalls t

Extension of Drainage pipe to restrict escape of dangerous gases

The box for lithium-ion batteries (Li-Ion) is suitable for the transport and storage of all groups of lithium-ion batteries and cells mentioned in 4.1.4.1 ADR (Packaging instructions). Suitable for transport of substances in packaging group I./X, II./Y or III./Z, according to ADR / RID / IMDG / RTDG

The Tri Lok® Cryogenic Triple Offset Butterfly Valve complies with various international standards and certifications, including API 609, ASME B16.34, ASME VIII, API 600, ASME B16.5, ASME B16.47, EN 1092, ISO 7005, ISO 5208, EN12266-1, API 6D, API 598, BS 6755, API 607, ISO 10497, PED, PE(S)R, SIL,

EN 12516 Design | For Low-Temperature Applications Down to -196°C | Bonnet Extension per ISO 28921 / BS 6364 Valvosider’s Cryogenic Gate Valves DIN Series are designed to ensure secure shut-off and safe handling of cryogenic fluids like LNG, liquid nitrogen, and liquid oxygen, with applications down

The Munro Stanley Portable Skid Resistance Tester (also known as the Pendulum Tester) is an essential tool for anyone with a duty to minimise the risk of accidents arising as a result of slippery roads and floor surfaces. This device is also used to investigate the cause of accidents after they have

EN 12516 Design | “T” Pattern for Horizontal Installation | Customizable Screen Perforation Valvosider’s Basket Type Strainers (DIN Series) ensure effective protection of pipelines and equipment by filtering debris and solid contaminants. The robust “T” pattern construction allows for horizontal ins

FLUITEK ORSENIGO VALVES has applied its extended experience in high pressure applications of gate valves to a line of small size (1/2” to 2”) forged construction specially designed gate valves. Standard of reference is API 602 / ISO 15761 and/or EN 12516. Materials are either the traditional ASTM/A

FLUITEK ORSENIGO VALVES has a very extended experience in supplying this type of valve for high pressure applications. The manufacturing features: fully guided disc in the body alternative shapes of disc (plug type, needle type, parabolic shape) swivel type stem-to-disc connection Are all deemed

This type of valve (also called “equilibrated disc non return valve”) is coupled with on-off valves in high pressure lines to protect the system from the fluid reversing flow, when regular flow is stopped. The characteristic of this valve is “non slamming”. The disc, with its shape, is maintained i

This type of valve, non-return, is coupled with on-off valves in high pressure lines to protect the system from the fluid reversing flow, when regular flow is stopped. The disc resistance to flow is keeping it open, a minimum flow rate being needed. FLUITEK ORSENIGO VALVES can supply, based on servi

EN 12516 Design | For High-Pressure and High-Temperature Applications | Short & Long Patterns Available Valvosider’s Pressure Seal Gate Valves DIN Series are specifically engineered for critical isolation duties in high-pressure and high-temperature environments typical of power stations and process

EN 12516 Design | For Oil & Gas and Industrial Applications | 90° Design for Perpendicular Plant Junctions Valvosider’s Globe Valves 90° Angle Bolted Bonnet DIN Series are engineered for high-performance shutoff in demanding industrial environments, particularly where piping configurations require a