316/316L-17 is a chromium-nickel-molybdenum covered electrode with rutile coating for welding of low carbon, molybdenum alloyed, austenitic stainless steels of 316L (1.4436) type. 316/316L-17 is used for welding steel of the types ISO: 1,4401, 1,4404, 1,4435, 1.4436, 1.4571 and ASTM: 316, 316L, 316L

OK Autrod 347 is suitable for joining stainless steels of the 18Cr/8Ni/Nb and 18Cr/8Ni/Ti types. Due to the strenghtening effect of niobium, this grade is recommended if the weld metal will be exposed to temperatures above 400°C (750°F). It is used for joining and overlay welding with MIG/MAG, plasm

2209 is used for welding of duplex stainless steels such as 2205 and 2304. It can also be used for welding of duplex stainless steels to carbon steel. It is used for MIG/MAG welding.

A continous solid corrosion resisting Duplex wire for welding of austenitic-ferritic stainless alloys of 22% Cr, 5% Ni, 3% Mo types. OK Autrod 2209 has a high general corrosion resistance. In media containing chloride and hydrogen sulphide the alloy has a high resistance to intergranular, pitting an

2594 is used for welding of 2507 and other super-duplex steels. The grade is characterized by excellent resistance to stress corrosion in chloride-bearing environments and excellent resistance to pitting and crevice corrosion. 2594 can also be used for welding 2205 and corresponding duplex steels wh

Internal and External Welding Immediately after the pipe forming process, inside welding is carried out around 30 mm behind the edge contact point by submerged arc welding process. Followed by half helical turn which depending on machine design external welding is carried out depending on pipe diame

Internal and External Welding Immediately after the pipe forming process, inside welding is carried out around 30 mm behind the edge contact point by submerged arc welding process. Followed by half helical turn which depending on machine design external welding is carried out depending on pipe diame

Since 1966, we have provided automated flash point testers with reliable results and high productivity to customers around the world. 10 years have passed since the release of the 8 series, and the model has been changed from apm-8 to apm-100. Easy Operation Equipped with 7-inch color LCD touch

The FCE 5705 faraday cup aerosol electrometer is the trusted reference for nanoparticle counting. Designed for calibration, research, and emissions testing, it offers traceable measurements, no consumables, and full compliance with ISO and EU standards.

Extended Measurement Range With an external chiller, a measuring range down to 0 ℃ can be achieved. Easy Operation Equipped with a 7-inch color LCD touch screen for simple, intuitive operation. Simply select a pre-registered test mode. No need to set detailed parameters. Data Storage 1,000 test resu

The Flexalen® Tools product page mentions several standards and certifications: - **EN 15632-1**: European standard for pre-insulated piping systems. - **EN 15632-3:2010+A1:2014**: European standard for pre-insulated piping systems. - **EN ISO 15876-1,2**: International standard for plastic piping

FAAC A1400 AIR SERIES automated systems are intended for the automation of exits in compliance with European Standard EN16005; in fact they are able to meet the most strict security standards according to EN 13489-1 PL C. Thanks to its innovative 'Energy Saving' device, it identifies the walking pa

Manufactured in PP according to UNE EN 13476 Type SN8 standard . Available in 6m tubes . Female heat-welded joint and gasket for the male end.

TRISANE structured wall pipe manufactured under the UNE EN 13476 standard. External and internal layer in PVC-U and intermediate layer in foamed PVC. Available in 6m bars and joined with elastic gasket.

The Ultra M insulation product complies with the harmonized standard PN-EN 14313+A1:2013-07, and its technical properties are tested according to EN ISO 8497, EN 13501-1, and EN 13472.

PPEcoforte is a high-strength pipe system with a triple-layer wall made of high-modulus polypropylene (PP-HM), suitable for underground, non-pressure sewage pipelines, in RAL 8023 on the outside and RAL 9003 on the inside. To complete the system, moulded and thermoformed fittings are available in c