DE-61 is the solution for clear heights from a minimum of 330 cm. This design features less columns in the entrance area for higher comfort while entering the system and opening car doors. The system has lifting platforms on the upper level and sliding platforms on the lower level with one empty sp

Are you looking for a parking lift that offers maximum comfort and high efficiency? Then our S2.8 double parking system is the right product for you. Thanks to its horizontal platforms, the double parking system provides convenient entry and exit. Our design also requires minimal installation space,

The V2 parking system was designed to accommodate cars of any height. Its vertical adjustability allows our duplex parking system to be perfectly adapted to your needs. The V2 is ideal for parking garages, residential buildings, and offices. The V2 creates dependent parking spaces: before the platfo

An automatic tower system from KLAUS Multiparking is always the right choice if little floor space is available. Rather than being wide, the tower system is either tall or deep – a lift transports your vehicle to a free parking space, where it is safely parked. With 15 parking levels one above the o

DE-40 is our comfortable and simple solution for Indoor use to double the number of parking spaces. The lower vehicle is directly parked on the ground. Flat platforms as standard equipment for high comfort when entering and walking. The lower vehicle on the ground must be driven out before the pla

The MAX3 parking system makes it possible for 5 to 29 cars to be parked in the car park system. It has three levels on which cars can park one above the other. The cars can be selected flexibly - this allows completely independent parking. Thanks to an empty space, the respective parking spaces are

The MAX1 car parking system is an automatic parking system with horizontally and vertically movable parking spaces. Two cars can be parked on top of each other. However, a pit is required. An empty space allows the selection of each car in the parking system: so the cars can be parked independently

Our PQ parking pallet system will enable you to make efficient use of the garage space by storing the vehicle even in a confined space. In our parking pallet system, the vehicle is parked on metal pallets. These pallets are moved transversely to store and retrieve the vehicle on a click of a button

MEATEC-RV ventilation and inspection channel Elements optionally made of galvanised steel or stainless steel Prevents waterlogging and ensures continuous drying of the facade Large openings for optimum rear ventilation of facades Open underside for optimum revision of seals Components to protect bui

Astral XLPE Pro insulation tubes are specifically designed for plastic and metal piping systems used in building construction and various industries such as plumbing, HVAC, and thermal insulation for chilling applications. These insulation tubes are manufactured using advanced machinery and equipmen

Totally Quiet Design – Sound dampening construction and casters for quiet, ultra-discreet delivery Versatile Tray Sizing – Accommodates 14" x 18" and 15" x 20" trays Gravity Locking Doors – Keeps the door closed during transportation Full-Length Door Handles – Facilitate cart maneuverability Corner

Totally Quiet Design – Sound dampening construction and casters for quiet, ultra-discreet delivery Versatile Tray Sizing – Accommodates 14" x 18" and 15" x 20" trays Gravity Locking Doors – Keeps the door closed during transportation Full-Length Door Handles – Facilitate cart maneuverability Corner

Totally Quiet Design – Sound dampening construction and casters for quiet, ultra-discreet delivery Versatile Tray Sizing – Accommodates 14" x 18" and 15" x 20" trays Gravity Locking Doors – Keeps the door closed during transportation Full-Length Door Handles – Facilitate cart maneuverability Corner

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

Special valve constructions to allow easy on-site maintenance and disassembly with quick access to ball and seats for inspection and repair.

Floating ball valves, construction to ASME B16.34 – ASME VIII Div.II, 2 piece bolted body, split body,side entry, flanged RF/RTJ to ANSI B16.5, face to face to ANSIB16.10, full/reduced bore, ISO (5211) top work standardized for actuation, metal seated (ball & seats with Tungsten or Chromium Carbides

We design, manufacture and construction of plastic and fiberglass reinforced plastic tanks and vessels. Depend on the application, we also design and manufacture dual laminate tanks and vessels based on the thermoplastic liners such as PVC, CPVC, PP, PE, PVDF, ECTFE, FEP and PFA. HCE received approv

Our fibreglass moulded gratings are corrosion resistant and a durable alternative to steel and plastic gratings. Other advantages include electrical insulation, high strength and low weight. Fibreglass gratings are suitable for use in aggressive environments such as offshore, in chemical industrial

Trunnion mounted ball valves, construction to ASME B16.34-API6D, 2/3 piece bolted body, split body,side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A, f

We can provide design and construction of tanks from thermoplastic material (normally polyethylene or polypropylene) engineered to the internationally recognized German design code DVS 2205 or European Code EN 12573. Design is carried out using the latest German software, RITA. In this case the thic

Most suitable for use in machinery, automotive, construction, and furniture industries

The range TANGRA AHU Modular with HYG constructions provides flexibility and a wide selection of components and technologies for ventilation and air conditioning. Hygienic air handling units are developed for ventilation of premises with increased requirements for air purity.

A modern playground must provide modern children with a much higher level of attractions. A swing or slide for a playground may be enough for toddlers, but older children expect stronger stimuli. These can be provided for them by climbing devices such as rope climbers and rope pyramids. These device

A modern playground must provide modern children with a much higher level of attractions. A swing or slide for a playground may be enough for toddlers, but older children expect stronger stimuli. These can be provided for them by climbing devices such as rope climbers and rope pyramids. These device

Vertical-Cylindrical Tank construction complete with Cylindrical Bund (110% volume of the tank) and fixed (welded) Rainskirt. Complete with various fittings to suit the requirements of the customer.