Hexagon Composite Engineering Sdn Bhd

Our fiberglass reinforced plastic (FRP) or Glass reinforced plastic (GRP) pipes and fittings are designed and made to BS7159. Pipe thickness fabricated according to this code is generally thicker than those ASTM codes such as ASTM D2996 and ASTM D3517. All pipe and fittings have 2mm thick minimum corrosion barrier. And depending on the type of medium running inside the pipe, we will custom-made the corrosion barrier both in terms of thickness and type of material for every application. We can produce dual laminate pipe and fittings if thermoplastic liner is required for cases where fiberglass liner is not resistant to the chemical. All standard pipes and fittings are coated with grey pigmented topcoat with UV absorber added into it for protecting the pipe and fittings against the ultra-violet rays. In cases when UV protection and accurate color coding of pipes and fittings is important, we have the flexibility of using polyurethane paint. Our pipes are used to convey mostly the corrosive medium as they are all custom design and made to meet specific design condition, unlike the standard commodity pipe.

We design, manufacture and construction of plastic and fiberglass reinforced plastic tanks and vessels. Depend on the application, we also design and manufacture dual laminate tanks and vessels based on the thermoplastic liners such as PVC, CPVC, PP, PE, PVDF, ECTFE, FEP and PFA. HCE received approval from JKKP (i.e. DOSH) of Malaysia on 22nd Dec 2014 to be their registered FRP Pressure Vessels manufacturer even though we had been designing and manufacturing pressure vessels for oversea markets long before this. With this additional registration, we shall be able to fabricate FRP pressure vessels for Malaysian market.