We use a special grade of butyl rubber tested to BS6920 standards and approved by the UK Water Regulations Advisory Scheme (WRAS), ensuring safe storage of potable water.

HDPE Pipes from S&M are manufactured according to ISO, DIN and BS standards from 20mm up to 800mm outside diameter in various Nominal Pressure Classes, Standards Dimensions Ratio and Pipe Series, details of which are shown later in our catalog. S&M HDPE pipes up to DN 125 are produced in 100 meters

Cable boxes manufactured by ZPUE S.A. are based on the company's SKR fibreglass reinforced plastic enclosures and metal enclosures. They form the basic elements of cable-based LV power grids. Depending on intended requirements, they are used for the electricity distribution, electricity metering and

Oliver Hydcovalves offers fluid control solutions for both post and pre-combustion carbon capture applications. Hydcovalves products are based on several years of experience in the oil and gas industry developing and supplying cost-effective, highly reliable instrumentation valves and pipeline ball

Raajratna is now introducing wide range of high quality wires, bars & profiles for medical sectors. We are supplying material for implants, needles and instruments. We can provide optimum quality wire in 302, 303, 304, 304V, 316, 316L, 316LVM, 316LRM, 420, 17-4PH, 420B grades and tempers. We delive

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requireme

FLUITEK ORSENIGO VALVES has a very extended experience in supplying this type of valve for high pressure applications. The manufacturing features: fully guided disc in the body alternative shapes of disc (plug type, needle type, parabolic shape) swivel type stem-to-disc connection Are all deemed

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requireme

Ritchie has supplied the offshore industry for more than 30 years supplying bundles that meet DNVGL-ST-E271 and BS EN ISO 10855 standards across the world. Standard bundle designs are available together with bespoke specified units and tube skids to meet variations in global and interface requireme

The page presents RELF 2S type medium voltage switchgear: air insulated, metal-clad, withdrawable, double busbar, with rated voltage 12 kV, for indoor use. RELF 2S is a modular, withdrawable, metal-clad, air insulated switchgear for primary distribution. It was equipped with double busbar system, w

Ritchie has been designing and supplying gas cylinder bundle frames to multinational industries since 1980 providing TPED and ISO BS EN 13769 certifications as appropriate. All testing of this equipment can be carried out by a third party on site in Forfar up to and including 64 cylinder frames. B

Insulating furniture supply in anthracite colour. Flexible solution for supplying workstations to furniture. Aesthetic integration. Easy relocation.

Sherwood PVE Series Propylene Valves for use in applications for welding, cutting, and supplying fuel gases.

The DETREG TM pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of t

The REGFLOW TM pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of

The Waikato Electronic Milk Meter provides you with real-time information on the performance of your cows to deliver an accurate and clear picture of how each animal is performing, at every milking. By supplying you with valuable data on milk yield, flow rates and milking duration in addition to mi

M10 is an electromagnetic flow meter grooved sensor that covers all diameters from DN50 to DN150. When high accuracy, light weight, and compact dimensions are required, the choice of sensors cannot be other than M10. These performances allow to measure low flow rates precisely and repeatable, even i

A revolutionary design of triple offset geometry, a progressive contact angle, an innovative double-inclined seat cone axis, a self-adaptive sealing system and a metal-to-metal sealing are a few examples of the unique features of our JTE triple offset butterfly valve. Especially designed for extreme

The Tri Lok® Cryogenic Triple Offset Butterfly Valve complies with various international standards and certifications, including API 609, ASME B16.34, ASME VIII, API 600, ASME B16.5, ASME B16.47, EN 1092, ISO 7005, ISO 5208, EN12266-1, API 6D, API 598, BS 6755, API 607, ISO 10497, PED, PE(S)R, SIL,

FBV cryogenic valves often use gate valves, globe valves, check valves, and ball valves. The design structure is selected according to the temperature of the user's working conditions. The valve body is designed in a wide range of stainless steel and alloy materials. The design and manufacture confo

Design Standards: 1) API 600 (ISO-10434)/API 6D/ASME B16.34 2) BS 1873/ASME B 16.34 3) BS 1868/API6D/ASME B16.34 Size Range: 1) Gate Valve:- ANSI Class 900 : 1/2" to 36" ANSI Class 1500 : 1/2" to 24" ANSI Class 2500 : 1/2" to 24" 2)Globe Valve :- bbANSI Class 900 : 1/2" to 24" ANSI C

The McCannalok™ Cryogenic High Performance Butterfly Valve complies with various standards and certifications, including design standards like ASME B16.34, ASME VIII, and API 609; testing standards such as API 598, ISO 15848-1, and API 641; and certifications like ABS, ATEX, Bureau Veritas, CCS, DNV

The RVB vacuum regulator regulates and measures the vacuum used for medical suction, available in three models differing by the degree of vacuum: RVB 1000 up to -950 mbar, RVB 600 up to -600 mbar, and RVB 250 up to -250 mbar. ([behringer.it](https://www.behringer.it/en/medical_gas_equipment-2/oxygen

MSS-SP-144 Design | Non-Slam Type for High-Pressure Power Applications API 623 | BS 1873 Design for Low-Temperature Applications down to -196°C The Cryogenic Globe Valve Series is designed in accordance with API 623, BS 1873, and ASME B16.34, MSS SP 134 ensuring safe flow control in cryogenic and lo