Technologie Médicale
Technologie Médicale is a French manufacturer specializing in medical devices, with 30 years of expertise in the fields of oxygen therapy and suction. They offer a range of products including flowmeters, pressure regulators, blenders, humidifiers, and suction accessories, all 100% made in France, recognized for their reliability and quality. ([technologiemedicale.com](https://www.technologiemedicale.com/en/?utm_source=openai))
All Products(5)
RVTM3
The vacuum regulator is used to measure and adjust the vacuum level within the context of medical suction. It enables to drain substances out of the patient’s body during surgical procedures. The vacuum regulator should be connected to a vacuum source on the wall either using a direct probe or a rail mounting system. It should be associated with a collection jar and a suction hose.
DETREG TM
The DETREG TM pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Only equipped with a quick-release connector, it enables to supply a ventilator or any other medical device with gas.
REGFLOW TM
The REGFLOW TM pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Combined with an RTM3 flowmeter with floating ball, the REGFLOW TM pressure regulator enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder. Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas.
DEBFLO DEBPLUS
The flowmeters with pre-adjusted flowrates DEBFLO and DEBPLUS are used to set the flow of a gas that is to be delivered to patients through the respiratory tract. They should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system. They must be fitted at the outlet either with a humidifier/nebulizer or with an outlet tubing nipple.
RTM3
The RTM3 flowmeter with floating ball is used to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract. The RTM3 should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system. It must be fitted at its outlet either with a humidifier/nebulizer or with an outlet tubing nipple.