UL / FM / AWWA Large Diameter Resilient Seated Gate Valves – Mechanical Joint x Mechanical Joint Ends. 14”-16”-18” Sizes are UL / FM at 250 psi rating. 20” and 24” are UL / FM at 200 psi rating. Manufactured to AWWA C515-15 Standard. Mechanical Joint Ends are to AWWA C111 / AWWA C153 Standard. Stain

Modern type, UL/ULC listed, FM approved, modern type, lateral elbow inlet, nuts/bolts & stem rod in AISI 316 (A4)

PN16 lug type butterfly valve with NBR seat and A-316 stainless steel disc. Made of ductile GGG40 cast iron with RAL5013 epoxy paint coating. The valve is suitable for shutting off the flow of a fluid partially or completely. It withstands a maximum working pressure of 16 bar (250 psi) and can withs

Wafer type butterfly valve with universal flange, chrome-plated ductile cast iron disc and rigid EPDM seat. Manufactured in cast iron with RAL5013 epoxy paint coating and flange in accordance with ANSI B16.5 class 125/150 and UNE-EN-1092 (PN10/16). The butterfly valve is used to partially or complet

The AMERICAN Series 2500 Ductile Iron 250 psig AWWA Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. The Series 2500 Resilient Wedge Gate Valve is furnished in configurations that are UL Listed an

Complies with AWWA C515 Standard NPT plug on body 300PSI Working pressure Ductile Iron Body Sizes: 3”, 4”, 6”, 8”, 10” & 12” – UL Listed Sizes: 2.5”, 3”, 4”, 5”, 6”, 8”, 10” & 12” – FM Approved

Complies with AWWA C515 Standard NPT plug on body 200 PSI Working pressure -10°C to 82°C Working temperature Ductile Iron Body Sizes: 20” & 24”

The AMERICAN Series 2500 Ductile Iron 250 psig AWWA Resilient Wedge Gate Valve is available with an indicator plate. The plate is designed to accommodate the installation of an indicator post. The valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation a

The AMERICAN Series 2500 Ductile Iron 250 psig AWWA Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. The Series 2500 Resilient Wedge Gate Valve is furnished in configurations that are UL Listed an

Butterfly valves are used in drinking water networks and water supply lines. Suitable for underground and surface installation. A rubber that provides sealing could be replaced without disassembling other parts. It can also be used with reducer and variousactuators. Butterfly valves are used in to r

ate valve with flanges, fixed shaft and EPDM resilient wedge. Made of GGG50 cast iron with RAL5013 epoxy paint coating, resilient cast iron seat + EPDM coating and flanges in accordance with DIN EN-1092-2. The gate valve is used to open or close the flow of fluids and in some cases to regulate the f

Resilient seated gate valve with electric actuator flanged with monolithic ISO top flange and full bore gate valve. Body bonnet and wedge made of ductile cast iron EN-GJS 400-15, NBR/EPDM fully vulcanised wedge. Epoxy coating minimum 250 microns according to EN ISO 12944-5, GSK RAL certificate. Wedg

Concentric disc made of ductile cast iron EN-GJS 400-15 or stainless steel. Stainless steel 1.4021 solid spline (not pinned) shaft with the bottom side seated in blind hole of the body. Centering slide bearing shaft made of bronze or brass or PTFE. Special shaped loose liner to seal with the shaft c

UL / FM (including UL-Canada) at 300 psi. The UL / FM Post Indicator Gate Valve – MJ x MJ meets AWWA C515-15 Standard. Mechanical Joint Ends are to AWWA C111 / AWWA C153 Standard. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard. NSF-61 and NSF-372 Certified. Meets the requirem

Includes American-Darling® and Waterous® brands, offering gate valves (2”-66”), check valves, indicator posts, tapping sleeves, hydrant security, remote pressure monitoring technology, and more.

Barcelona PAS-81 model grate and scupper frame assembly made of ductile iron, with a folding and reversible grate depending on the direction of the water, measuring 820x350x100 mm. Complies with EN 124-2 and class C 250.

Fuel and oil circuits, water and steam systems

PN16 globe valve with flanges in accordance with DIN 2501. Made of GG25 cast iron with RAL5013 epoxy paint coating, A-304 stainless steel seat and graphite gaskets. The valve withstands a maximum working pressure of 16 bar (250 psi) and is suitable for operating temperatures from -20 to 200°C. Model

Conventional automatic fire detection and alarm system. This plant contemplates different models to adapt in the most precise way to the needs of each installation: IRON02: IRON control panel with 2 detection zones IRON04: IRON control panel with 4 detection zones