Gasco designs, fabricates, commissions and services an extensive range of Process Skids for Gas Conditioning and Oil Treatment including: Emergency shut down systems Filter coalescers Custody transfer metering with analysers Hot water heater/HX gas heating Water bath heaters API 12K Pressure reduct

Depending on the type of process, duty, space and customer requirements, a furnace type is designed. Aitesa designs the following types of furnaces: Horizontal cylindrical kiln: Up to 1 Gcal/h. It has a horizontal combustion chamber without tubes and 1 burner located at the bottom of the horizonta

Gasco supplies Fired Heaters to API 560 and ISO 13705 and proprietary Gasco forced draft convective designs. A typical API 560 Fired Heater would consist of a: Radiant Section Convective Section Stack Burners Fuel Skid Control System Gasco, being both a combustion and heat transfer company, is uni

Urine measurement system for diuresis Ureofix® 500 Classic is a closed sterile urine measurement system dedicated to diuresis and evaluation of urine quality, which allows an accurate urine volume measurement. The set includes a rigid 3-compartment container and a closed exchange bag.

Millimeter-accurate snow levels in all weather conditions: The SHM31 operates with a visible measuring beam pointing to ground. It can be mounted up to 16 m high above the snow-free ground. Measurements can be done within seconds, millimeter-accurate and reliable. Various heating functions signific

* Please read and observe the BW-800 Disclaimer avialable in the Download section * Please note that the MED-B & D overrules the DNV Type approval certificate for the BNWAS BW-800 model. BNWAS BW-800 is produced in Denmark to ensure the high level of quality is maintained. BW-800 is designed as a c

CGR4 pyrgeometer is an instrument for the highest quality scientific measurements. The specially designed meniscus dome provides a 180° field of view with negligible directional response error. A hard-carbon coating on the outside of the dome smoothes the spectral response and provides extra protect

The range consists of 20 air-water models available as chiller and heat pump, with cooling capacities from 50 to 380 kW. The range’s main strongpoint is its high efficiency, not only as time efficiency (Class A Eurovent in chiller and heat pump mode) but especially as seasonal efficiency, aiming to

The Omega KTO-KTS-Series is a compact thermostat designed for temperature regulation and limit monitoring. The series identity centers on small-size, DIN rail-mounted units with high switching performance. Documented applications include regulating heaters using normally closed (NC) configurations a

A geothermal exchange pipe system designed for efficient vertical and directional boring, featuring the patented Centennial Bullet™ U-Bend fitting for easy installation.

COMPRESS saves companies time and money by helping engineers efficiently design and rate ASME® VIII pressure vessels and heat exchangers. Benefits include industry-standard ASME calculation reports, no additional charge automatic drawings and FEA, cost estimating and the best technical support servi

The CGDA Series refrigerated air dryers deliver reliable ISO 8573-1 Air Quality, Class 4 to 5 pressure dew point, and uses eco-friendly R513A refrigerant. Featuring durable aluminum heat exchangers and low pressure drop for energy efficiency, the dryers come in models ranging from 7 to 50 scfm. Cert

They are used in road and agricultural equipment as inputs for industry, and can also be found in various applications that require dimensional precision, as they are also called precision tubes. Some applications: Irrigation systems Drainage Artesian Wells Agricultural Machinery Equipment Sugar M

The redesigned PMRC product line utilizes single-stage axial fan configuration at ground level with more redundancy, increased reliability, and easy maintenance access. The PMRC features Thermal-Pak II® Coil with CrossCool™ Internal Tube Enhancement for increased internal heat transfer coefficient o

NIROFLEX is a flexible corrugated stainless steel pipe system and is ideal for transporting liquids, as a protective pipe or as a heat exchanger pipe. The NIROFLEX CNT with installation protection casing made of LDPE is available to be laid underground.

Lube Oil Consoles, Seal Oil Systems and Control Oil systems are designed to provide pressurized lubricating oil to various types of industrial rotating equipment. Typically, these lube oil systems include pumps, heat exchangers, filters, controls and instrumentation. Built under controlled condition

is a high-pressure natural circulation boiler operating by the gravity circulation principle. Therefore circulating pumps are not required to operate the NUK-HP®. Boiler water is used as the heat carrier. The water is evaporated in this boiler within a hermetically sealed circuit. The steam flows to

The WING air curtain is a device that aims to create an invisible barrier that separates environments with different air parameters from each other. The minimalist shape of the WING curtain housing, inspired by the shape of glider wings, and the characteristic diamond-shaped side covers give the cur

The pyranometer is compliant in its standard configuration with Class A requirements of the new IEC 61724-1 standard. SR30 is “Secondary Standard” in the ISO 9060:1990 standard and “Spectrally Flat Class A” in the ISO 9060:2018 revision. It is the ideal instrument for use in PV system performance mo

YWCT’s FRPPs are induced-draft cooling towers made of FRP. The structure of our FRPP series (support beams and columns) is made of composite continuous fiberglass pultruded sections that comply with CTI’s STD 37 and conform to ASTM E84D with a flame spread rating of below 25. FRPP cooling towers are

Multi tube heat exchangers consist of three or more parallel tubes inside of a shell. Product flows inside the smaller tubes. This design is ideal for homogenous products with thin to medium viscosities, with or without particulates. Application Multi tube heat exchangers are ideal for thin product

Triple tube heat exchangers have about twice the area of double tube / linear foot. They consist of three concentric tubes — product normally flows in the annular space between the inner and middle tubes. They are well-suited for thick viscosity products, with or without particulates. Application T

Our line of Schmidt® SIGMAWIG all-welded plate heat exchangers represents the most compact, rugged and cost-effective means of transferring heat in many industrial applications. Built entirely without gaskets or with an O-ring type gasket between the all-welded plate pack and frame, they provide ex