A mechanical device designed to automatically shut off gas flow during seismic events, preventing potential gas leaks and explosions. It operates without electrical power and can be installed in both vertical and horizontal positions.

A flanged-type split body ball valve with a full bore, suitable for a wide range of applications. Available in sizes from 1/2” to 6” and pressure ratings up to ANSI 300.

F1960 Full Port Virgin PTFE Seats Double NBR O-ring Packing Blow-Out Proof Stem For Use with PEX Tubing CSA B125.3 ASTM-F1960 AB1953, NSF/ANSI/CAN 61 & 372

F1960 Full Port Virgin PTFE Seats Double NBR O-ring Packing Blow-Out Proof Stem For Use with PEX Tubing CSA B125.3 ASTM-F1960 AB1953, NSF/ANSI/CAN 61 & 372

F1807 Full Port Virgin PTFE Seats Double NBR O-ring Packing Blow-Out Proof Stem For Use with PEX Tubing CSA B125.3 ASTM-F1807 AB1953, NSF/ANSI/CAN 61 & 372 Certified 5007ABW =With Wing handle

A blind flange conforming to ASME B16.5 standards, used to seal the end of a piping system.

DATREX Maxflow Level 70 Newton lifejacket/PFD ANSI is designed for continuous wear while working near shore or easy access to safety. Level 70N is a new standard from USCG that harmonizes the approval across North America and replacing Type III type designation. Significant features with Datrex Maxf

REHAU EVERLOC+® Full Port Chrome Plated Ball Virgin PTFE Seats Double NBR O-ring Packing Blow-Out Proof Stem CSA B125.14 AB1953, NSF/ANSI/CAN 61 & 372 * Stem Extension Available 5418BW = With Wing Handle (1/2″ – 1″)

382270 is a Quad Output DC Power Supply has two 0 to 30V/0 to 5A outputs plus two fixed auxiliary outputs of 3 to 6.5V/3A and 15V/1A. The two 30V outputs can be combined in parallel for 10A or in series for 60V. Comes complete with 4 pairs of test leads (banana plug to alligator clip) and an AC cord

The new generation JBF-M features a more robust structural design and fully meets all latest market design standards and requirements. It is engineered to perform reliably under extreme conditions, including high temperatures, cryogenic environments, and highly abrasive applications—making it the id

Oliver Hydcovalves offers fluid control solutions for both post and pre-combustion carbon capture applications. Hydcovalves products are based on several years of experience in the oil and gas industry developing and supplying cost-effective, highly reliable instrumentation valves and pipeline ball

JBF Series are quarter-turn ball valves engineered to provide a reliable performance for a wide range of applications, in industries such as Oil & Gas, Mining, Petrochemical, Chemical, Power Generation… Our vanguard design with many technically advanced features (optional fire-safe, longer stem, liv

Butterfly valves are used in drinking water networks and water supply lines. Suitable for underground and surface installation. A rubber that provides sealing could be replaced without disassembling other parts. It can also be used with reducer and variousactuators. Butterfly valves are used in to r

2-piece Body Full Port Chrome-Plated Ball Virgin PTFE Seats Adjustable Packing Nut Blow-Out Proof Stem MSS-SP-110 500 psig (1-¼”, 2″) for UL use CSA B125.14 (¼” – 2”) CSA ½, 5 & 125 psi (½” – 2″) CSA ½ & 5 psi (2½” & 3″) 29 in-Hg rating for Vacuum Service UL approved (½” – 2”) FM approved (½” – 2″)

PIPE LENGTH - Gas, Oil and Water Pipes 6 - 18,5 m PIPE LENGTH - PilING and StructurAL Pipes 6 - 40 m

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

The IMI C-REX™ double eccentric segmented ball valve delivers reliable, high-cycle performance in severe service applications. Designed for bi-directional tight shutoff, it features a cavity-free, torque-seated design that enhances durability and minimises wear. Available in sizes from DN 12 to 900

The Extech 382275 power supply is an easy-to-configure, highly stable, lab grade DC power supply with maximum output power of 600 Watts. The new DC power supply offers two degrees of control over both current and voltage outputs (course and fine). Output is adjustable from 0 to 30 Volts DC and 0 to

FEATURE Standard port, 1/4″~2″ (DN8~DN50) W.P. : 2160 WOG W.T. : -20°C~200°C (-4°F~392°F) Investment casting Blow-out proof stem Anti-static device (option) Locking device ISO 5211 mounting pad Seal welded ends ASME B16.34 Wall thickness NACE MR0175 API 607 Fire safe approved API 608 Design Thread t

The JBT & JBTM Series are Trunnion-mounted ball valves designed with vanguard engineering and highly sophisticated technology. Our in-house High Velocity Oxygen Fuel-sprayed hard faces allow them to defy the toughest operating conditions, such as high pressure, abrasive and corrosive mediums, slurri

JBK/JBKM Series ball valves are designed for keeping fluid in specific temperature during the process. Optional seat materials provide the wider range of application to satisfy various industrial environments.

JBFM Metal-Seat Ball Valve is designed especially for serve services with high temperature, abrasion or corrosion in the industrial processes. With JDV’s self-owned coating technology, a wide range of hard faces are available to satisfy all your using conditions.

To answer the growing demand of reliable and robust metal-seated threaded & welded ball valves, our experienced engineering teams designed the JBSM Series, meeting the requirements of the most challenging industries: Oil & Gas, Refineries, Petrochemical & Chemical Industries, Power Generation, Pulp