FRP ducting is used for vapors, gases and corrosive environments where resin selection, chemical barrier and laminate performance are critical.

FRP tanks, vessels and process equipment may be manufactured considering recognized standards for corrosion-resistant equipment, chemical storage and industrial service.

Vertical GRP tanks with flat bottom are a preferred solution for overhead storage facilities because of their low cost and ease of installation directly on a concrete slab, without the need for additional operations. Constructed from GRP or GRP with a thermoplastic liner, these tanks are sized in ac

We design, manufacture and construction of plastic and fiberglass reinforced plastic tanks and vessels. Depend on the application, we also design and manufacture dual laminate tanks and vessels based on the thermoplastic liners such as PVC, CPVC, PP, PE, PVDF, ECTFE, FEP and PFA. HCE received approv

MrPEX® POTABLE PEX-a Tubing is Cross-Linked Polyethylene (PEX-a) manufactured in accordance with ASTM F 876. Tubing is listed to ASTM F 876/F877/F2023, ASTM E84 (CSA B137.5), cNSFus-pw, NSF/ANSI-61, NSF/ANSI-14, Annex G, NSF U.P.Code PEX 5106, ICC-PMG, ANSI/AWWA 904. MrPEX® POTABLE PEX-a tubing is r

Gastite® Corrugated Stainless Steel Tubing (CSST) supplies natural gas or LP gas to appliances. Gastite is a reliable, cost-effective system that can be installed in all modes of construction. Flexibility means quick and easy installations: Gastite® installs 30-70% faster than traditional piping met

The Safeprotex Vermiculite-Coated Fiberglass Welding Blanket is made from vermiculite-coated fiberglass fabric, where the vermiculite coating forms a protective layer on the fiberglass surface. This advanced coating technology allows welding blanket to endure fixed working temperatures up to 810°C (

Its purpose is to expel accumulated air from a pipe when it is pressurized and in service.

Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition,

Provides the functions of both Air Release Valve and Air / Vacuum Valves. Exhausts large quantities of air at start-up. Provides protection from pipeline collapse due to vacuum. Incorporates both features into one valve. More compact and economical.

Dual air release vents the accumulated small volumes of air during normal system operation. Allows venting of large volumes of air during pipeline filling. Provides protection from pipeline collapse due to vacuum. Flanged to ANSI B16.1, Class 125. Other flange types available upon request. Fusion Bo

Wall bars width: single 90 cm; double 180 cm. The sides of the wall bars are made of glued softwood. Rungs made of beech wood. The surface of the ladders is covered with a durable, environmentally friendly varnish. Dimensions: Wall bar sides: 100 mm wide, 30 mm thick. Rungs with an oval cross-sectio

Full lift safety valves for steam and gases - standard safety valves for liquids, flanged ends, spring loaded, direct loaded, precise guiding. To relieve excess pressure from vessels, equipment and pipe systems under pressure. Specification of the range: Diverse design combinations by lifting device

Wall bar width: single 90 cm; double 180 cm. The sides of the wall bars are made of glued softwood. Rungs made of beech wood. The surface of the wall bars is covered with a durable, environmentally friendly varnish. Wall bar sides: 100 mm wide, 30 mm thick. Rungs with an oval cross-section 43x33 mm.

Pressure Regulator for Subsea Applications: Liquid / Piston / Non- or Self-Venting / Max. Inlet: 1,034 bar (15,000 psi) / Max. Outlet: 690 bar (10,000 psi) / Cv 0.1

The Tri Lok® Cryogenic Triple Offset Butterfly Valve complies with various international standards and certifications, including API 609, ASME B16.34, ASME VIII, API 600, ASME B16.5, ASME B16.47, EN 1092, ISO 7005, ISO 5208, EN12266-1, API 6D, API 598, BS 6755, API 607, ISO 10497, PED, PE(S)R, SIL,

Oliver Hydcovalves offers fluid control solutions for both post and pre-combustion carbon capture applications. Hydcovalves products are based on several years of experience in the oil and gas industry developing and supplying cost-effective, highly reliable instrumentation valves and pipeline ball

AMI-SIL® AS and CAS hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). The following AMI-SIL AS and CAS hot work fabrics have been tested and rated to the ANSI/FM 4950 Standard which is now required by the NFPA 51B. AS1800G & AS3600 meet USCG1