The Bowie Dick Simulation Test is a breakthrough reusable Process Challenge Device (PCD) that combines both Bowie-Dick and hollow load test requirements in a single system. Designed specifically for pharmaceutical and biotech manufacturing, this type 2 indicator system meets ISO 11140-1 standards an

ISO 17025 Accredited The Primary Calibrator 4046 has a range of 2.5 to 300 liters per minute (L/min).

The Tri Lok® Cryogenic Triple Offset Butterfly Valve complies with various international standards and certifications, including API 609, ASME B16.34, ASME VIII, API 600, ASME B16.5, ASME B16.47, EN 1092, ISO 7005, ISO 5208, EN12266-1, API 6D, API 598, BS 6755, API 607, ISO 10497, PED, PE(S)R, SIL,

multi-jet water meters; temperature classes T30 - T50 - T70 - T90; MID approved according to the European Directive 2014/32/CE and in compliance with the norms EN 14154 ISO 4064 and OIML R49; all models, on request, can be supplied pulsed output or preset for remote reading.

The KR Series is the single screw high performance helical extrusion line of Krah, which is a complete plastic pipe production plant, to produce structures wall (acc. DIN16961, etc.) or solid wall pipes (acc. ISO 4427 etc.) on internal diameters from DN 300 mm up to DN 5000 mm made out high density

AMI-SIL® AS and CAS hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). The following AMI-SIL AS and CAS hot work fabrics have been tested and rated to the ANSI/FM 4950 Standard which is now required by the NFPA 51B. AS1800G & AS3600 meet USCG1

Trunnion mounted ball valves, construction to ASME B16.34 - API6D, 2/3 piece bolted body, split body, side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A,

FBV cryogenic valves often use gate valves, globe valves, check valves, and ball valves. The design structure is selected according to the temperature of the user's working conditions. The valve body is designed in a wide range of stainless steel and alloy materials. The design and manufacture confo

The microscope system PAMAS FastPatch 2 GO has been developed to comply with the standard ISO 4407 as an automated filter membrane particle counting and sizing system. The system is designed to measure the particles trapped on the surface of the filter. The analysis uses advanced image analysis and

Single and Double-Wall Positive Pressure Special Gas Vent engineered for venting today’s high efficiency natural gas-burning or propane fired appliances, categories II, III and IV as defined by the Standard for Gas-Fired Central Furnaces, ANSI Z21.47 and NFPA 54.

The high-precision, optical particle counter PC 400 measures particles from a size of 0.1 µm and is therefore suitable for monitoring compressed air quality class 1 (ISO 8573). The proper functioning of the filtration elements installed in the compressed air is monitored and any filter breakthroughs

Trunnion mounted ball valves, construction to ASME B16.34-API6D, 2/3 piece bolted body, split body,side entry, double block & bleed, flanged RF/RTJ to ANSI B16.5, face to face to ANSI B16.10, full/ reduced bore, ISO (5211) top work standardized for actuation, seat leakage rate to ISO 5208 Rate A, f

Flexible Wedge/Solid Wedge/Split Wedge/Double disc, Outside Screw & Yoke, Bolted Bonnet Design, SW/SE/Flanged end/Welded end. Design Standards: API 600 (ISO-10434)/API-603/ASME B16.34 Size Range: ANSI Class 150 : 1/2" to 60" ANSI Class 300 : 1/2" to 48" ANSI Class 600 : 1/2" to 36" ANSI Cl

Svanehoj safety valves are fail-safe, remotely operated valves for storage tank protection. This range of fail-safe, remote operated valves provides rapid shut down in case of emergency or fire. It is particularly recommended to safeguard storage tanks and loading facilities handling liquefied gas

volumetric meter rotating piston; temperature classes T50; MID approved according to the European MID Directive 2014/32/CE and in compliance with the norms EN ISO 4064 and OIML R49; all models, on request, can be supplied with static (inductive) output or preset for remote reading.

The ISO PACK 4000 offshore cryogenic tank is T75 UN Portable and has approvals for road, rail and sea transport. It also has CSC with DNV 2.7-1 / BS10855 approval and can often be seen on offshore supply vessels being transported to oil production platforms all over the world. With working pressure

ISO 527-4, ISO 527-5, ASTM D3039, EN 2561 ASTM D3039 describes the standard method for tensile testing polymer matrix composites It covers test methods for a wide range of specimen dimensions as different testing configurations. The specimens is generally prepared with tabbed ends that allowed for a

trunnion mounted ball valves feature: a full line product offering with valves ranging in 2"-42", ANSI classes 150LB - 2500LB, forged steel bolted or all welded body, close coupled trunnion block design for low operating torques, secondary seat sealant feature.API-6D valves are offered with self rel

The EMCO wet gas meter is used to measure the flow rate in natural gasses with a certain level of liquid present. Based on the classical venturi tube according to ISO 5167-4 with single pressure tappings. A third tapping may be applied for liquid flow rate determination using the pressure loss ratio

316/316L-17 is a chromium-nickel-molybdenum covered electrode with rutile coating for welding of low carbon, molybdenum alloyed, austenitic stainless steels of 316L (1.4436) type. 316/316L-17 is used for welding steel of the types ISO: 1,4401, 1,4404, 1,4435, 1.4436, 1.4571 and ASTM: 316, 316L, 316L

Our PREMIUM polypropylene water meter battery is superior to conventional ones. It is weld-free, rust-free, and complies with UNE 53943:2017. One-piece PPR tube , with built-in plastic plate, without welding. Polypropylene pipe circuit according to UNE-EN ISO 15874-1:2004 and UNE-EN ISO 15874-2:2004

Our PREMIUM polypropylene water meter battery is superior to conventional ones. It is weld-free, rust-free, and complies with UNE 53943:2017. One-piece PPR tube , with built-in plastic plate, without welding. Polypropylene pipe circuit according to UNE-EN ISO 15874-1:2004 and UNE-EN ISO 15874-2:200

NTBatteryManagementSystem 48V is an e-mobility ready to use design and complete safety support package for Battery Management Systems. It is based on a modular approach: a functional safety System-on-Module and a Battery Management System (BMS) application module. The NTBMS module platform is desig

NTBMS Module Platform is an e-mobility ready to use design and complete safety solution for Battery Management Systems. It is constructed with a modular approach: A Battery Management System (BMS) control application board and additional modules for distributed HV applications. The NTBMS Module Pla

ISO 19880-3 (Hydrogen gas – Refuelling stations – Part 3: Valves) distinguishes between valves for maintenance (Class B) and for operation (Class A). While Class B valves are designed to withstand only 100 cycles of operation at ambient temperature, Class A valves must withstand 102,000 cycles (100,