Energy

12-27m mt-bt poles

by Pali Campion Srl

View Pali Campion Srl on TEKEN44

Welded sheet metal poles with a polygonal cross-section for medium and low voltage overhead lines, manufactured under ISO9001 certified quality control by an ENEL-approved company and authorized as a transformation center according to Ministerial Decree 14/01/08. Composed of 2 or 3 sections that can be joined on site by overlapping, made by cold-forming quality steel sheet metal according to EN 10025 standards and subsequent external longitudinal welding performed using an approved automatic process and weld quality control according to EN ISO 3834. Enel-approved test pull following the successful completion of the pull tests required by the DS3012 standardization document. Composition and processing based on the type of pole according to Enel DS3012 standardized diagrams: diagram 1: pole in 2 sections with M16 nut at the base of the pole, Ø 22 through hole and closing cap with a pole top bush; Scheme 2: 3-section pole with M16 nut at the base of the pole, 22mm through hole, and closing cap with a bush at the top of the pole. Identification marking punched into the sheet metal, showing the manufacturer's code, the pole code, and the year of manufacture. Dimensional tolerances DS3010 - UNI EN 10051 Corrosion protection by hot-dip galvanizing, obtained with the following cycle: degreasing; pickling; washing; fluxing; preheating; galvanizing in molten zinc at 440÷450 degrees centigrade, with a minimum percentage of zinc in the galvanizing bath of 98.5%. Coating obtained in compliance with the UNI EN ISO 1461 standard with minimum thicknesses of 55 microns and average of 70 microns.