Tata Steel UK Ltd./Hartlepool 20" Pipe Mill

Durbar® is the leading brand of hot-rolled structural steel floor plate, made in the UK for over 50 years – only by Tata Steel. The pattern of diamond studs on genuine Durbar is on average 23% deeper than generic checker plates, with 10% more studs providing outstanding slip resistance. Durbar is readily available: we are committed to prompt and reliable delivery. The consistent quality of Durbar offers reliable, repeatable processing. Its distinctive, raised surface pattern is extremely slip-resistant at all angles – allowing plates to be used in any direction. Its self-draining surface is easy to clean and reduces corrosion.

RoofDek acoustic structural liner trays provide a neat planar inner surface and structurally support the external envelope. RoofDek acoustic structural liner trays offer a wider flat soffit enabling a greater perforated area, achieving the best acoustic absorption result. The percentage of exposed area is the open area divided by the exposed area of steel following around the profiles. The percentage of cover area is the open area divided by the plan area of the soffit.

Trisomet® is an insulated panel system suitable for both roof and wall cladding applications. A factory engineered one-fix component ensures consistant thermal and air tightness performance, and speed of installation. The wide spaced trapezoidal steel external skin provides optimum performance for water drainage, strength and walkability. Manufactured in factory conditions operating to quality management standard BS EN ISO 9001:2015, environmental management standard BS EN ISO 14001: 2015 and occupational health and safety management standard BS EN ISO 45001:2018. Full traceability of all component materials and certified ‘very good’ to BRE’s responsible sourcing standard BES 6001.

Trimapanel® from Building Systems UK is an insulated secret fix micro-rib architectural wall panel with enhanced fire resistance that provides an architectural external aesthetic to your building facade. Trimapanel® is is quick and easy to install for fast build times. Available in a wide range of sizes, shapes and colours, the system is also available for vertical and horizontal application. This variant includes enhanced fire resistance that provides an architectural external aesthetic to your building facade. Manufactured in factory conditions operating to quality management standard BS EN ISO 9001:2015, environmental management standard BS EN ISO 14001: 2015 and occupational health and safety management standard BS EN ISO 45001:2018. Full traceability of all component materials and certified ‘very good’ to BRE’s responsible sourcing standard BES 6001.

Manufactured in factory conditions operating to quality management standard BS EN ISO 9001:2015, environmental management standard BS EN ISO 14001: 2015 and occupational health and safety management standard BS EN ISO 45001:2018. Full traceability of all component materials and certified ‘very good’ to BRE’s responsible sourcing standard BES 6001.

What is MagiZinc®? MagiZinc® is an innovative replacement for conventional galvanised steels. It provides superior corrosion protection even in harsh environments. A product that performs... MagiZinc® provides superior protection, extending product life and offering excellent formability and weldability. It is a hot-dip zinc coating alloyed with magnesium and aluminum. A chromium-free passivating agent makes MagiZinc® compatible with common paint. RoofDek MZ - Our structural RoofDek product with a 140g/m2 MagiZinc® coating weight. Why use MagiZinc® on our RoofDek products? The testing work undertaken on our roofing and floor decking products with the MagiZinc® coating shows an improved product performance over our standard galvanised coating. Our RoofDek® MZ product has a lower whole life carbon performance when compared with standard Z275 galvanised coating. Our RoofDek® MZ products have lower coating embodied carbon when compared with standard Z275 galvanised coating. We have built up a significant amount of test data on our Magizinc® products which provides evidence for improved product performance through the life of your project. ​ Our RoofDek® MZ product delivers a 37% reduction in coating CO2 when compared with Z275 galvanised coating. ​The coating process for our MZ products requires fewer resources but delivers improved product performance. Our UK supply chain reduces risk and increases security of supply. Tata Steel has over 60 years experience of galvanising and coating steel.​

Celsius® is our range of fully normalized hot finished hollow sections to EN 10210. Celsius® is the ultimate hot finished structural hollow section. Designed to perform in the most arduous conditions, the Celsius® range have outstanding properties thanks to their fully normalized steel. Celsius® is available in a range of grades, including the popular S355NH and weight-saving high strength S460NH. The size range available for Celsius® is one of the broadest on the market Our team of technical experts are always on hand to help you get the most out of Celsius®. Contact us to find out how we can help you.

Hybox® is a cold formed, high-grade multi-purpose hollow section, offering trusted formability and toughness. It is batch-tested for your assurance and perfect for projects where you require guaranteed minimum strength and mechanical properties. It can be used in a wide range of structural and engineering applications, including all those where specific properties and compliance with design codes are required. Hybox® fully complies with the European Standard for cold formed structural hollow sections, EN10219 S355 J2H and is used in a wide range of construction and mechanical related applications including wind bracing and machinery.

Our family of multi-certified and aligned HFW (High Frequency Welded) tubes, deliver a rationalised, simplified and convenient range of dedicated products, to satisfy the widest range of conveyance and pressure requirements.

Strongbox® fully complies with the dimensional tolerances of the European standard for cold formed hollow sections, EN10219.

Tata Steel’s metallic coated structural steel behaves reliably in roll-forming and bending processes and is suitable for welding.

Our range of metallic coated high-strength steels includes micro-alloyed and bake-hardening grades. Available with various corrosion-resistant coatings, they are ideal for applications requiring strength without a weight penalty. MagiZinc® coatings improve press shop yields, enable reduced coating thickness and optimise weight savings.

Our cold-rolled forming steels are available in a wide range of grades and corrosion-resistant coatings. Each grade is designed for specific applications and comes with a choice of surface quality. Extensive dimensional choice provides opportunities for cutting waste and maximising yield. Our range of forming grades is available in both zinc coated and MagiZinc® (zinc-magnesium) coated. MagiZinc improves corrosion resistance with half the thickness of conventional zinc coatings, increasing yield, reducing cost and facilitating stronger, lighter products. Applications Automotive components Building components Domestic appliances Tubes and sections

Tata Steel’s structural steel for gas cylinders offers excellent deep-drawing properties and weldability for ease of processing.

Durbar® is the leading brand of hot-rolled structural steel floor plate, made in the UK for over 50 years – only by Tata Steel. The pattern of diamond studs on genuine Durbar is on average 23% deeper than generic checker plates, with 10% more studs providing outstanding slip resistance. Durbar is readily available: we are committed to prompt and reliable delivery. The consistent quality of Durbar offers reliable, repeatable processing. Its distinctive, raised surface pattern is extremely slip-resistant at all angles – allowing plates to be used in any direction. Its self-draining surface is easy to clean and reduces corrosion.

Tata Steel’s FB590 hot-rolled advanced high strength steels has been developed primarily to meet your needs for automotive and engineering applications – increasing strength or reducing weight to help achieve optimal performance parameters.

Tata Steel’s hot-rolled high-strength, low-alloy (HSLA) grades offer formability and strength for demanding applications.

Hot-rolled steel for cold forming is used for bending and deep drawing.